[Compactbsd-devel] RE: [Compactbsd-devel]
Status: Alpha
Brought to you by:
ttul
Menu
▾
▴
[Compactbsd-devel] RE: [Compactbsd-devel]
|
From: Mike M. <mmc...@pn...> - 2002-10-26 15:15:21
|
D'oh! Never mind, I should have done "disklabel -d sd0" like it says in the comments in flashdist.sh. It's working now. Thanks again! > Thanks for the fast response, it's very much appreciated! > > I'm still having no luck, however. Here's the output of 'disklabel sd0', after I > cleared out the partitions: > > ------------------ > # disklabel sd0 > # using MBR partition 3: type A6 off 32 (0x20) size 125408 (0x1e9e0) > # /dev/rsd0c: > type: SCSI > disk: SCSI disk > label: ImageMate II > flags: > bytes/sector: 512 > sectors/track: 32 > tracks/cylinder: 8 > sectors/cylinder: 256 > cylinders: 490 > total sectors: 125440 > rpm: 3600 > interleave: 1 > trackskew: 0 > cylinderskew: 0 > headswitch: 0 # microseconds > track-to-track seek: 0 # microseconds > drivedata: 0 > > 16 partitions: > # size offset fstype [fsize bsize cpg] > c: 125440 0 unused 0 0 # (Cyl. 0 - 489) > # > ----------------- > > So I changed flashdist.sh to this: > > -------------- > # Value Disklabel name > # > #totalsize=62720 # "total sectors:" > totalsize=125440 > bytessec=512 # "bytes/sector:" > sectorstrack=32 # "sectors/track:" > sectorscylinder=256 # "sectors/cylinder:" > trackscylinder=8 # "tracks/cylinder:" > #cylinders=245 # "cylinders:" > #cylinders=285 > #cylinders=213 # doesn't work > #cylinders=245 > cylinders=490 > ---------------- > > And when I run 'python build.py -b sd0', I get this: > > ----------------- > # /usr/local/bin/python build.py -b sd0 > 1035585396.92 [12687]: Creating working stand directory... > 1035585396.93 [12687]: Copying boot files into working stand directory... > # using MBR partition 3: type A6 off 32 (0x20) size 125408 (0x1e9e0) > fdisk: sysctl(machdep.bios.diskinfo): Device not configured > # using MBR partition 3: type A6 off 32 (0x20) size 125408 (0x1e9e0) > newfs: /dev/rsd0a: Device busy > 1035585410.76 [12687]: flashdist.sh 20020501 ch...@dq... > 1035585410.76 [12687]: Using disk device: sd0 > 1035585410.76 [12687]: Using distfile: /root/CompactBSD-0.1.0/flashdist/flashbig.txt > 1035585410.76 [12687]: Copying kernel from: /bsd > 1035585410.76 [12687]: > 1035585410.76 [12687]: Please pay attention to any error messages that you may > 1035585410.76 [12687]: receive from the commands this script it using. If you > 1035585410.76 [12687]: end up having problems, they could explain why. > 1035585410.76 [12687]: Setting up disklabel... > 1035585410.76 [12687]: > 1035585410.77 [12687]: The install script is using the following parameters: > 1035585410.77 [12687]: Total size of media: 125440 sectors (64225280 bytes) > 1035585410.77 [12687]: Bytes/Sector: 512 > 1035585410.77 [12687]: Sectors/Track: 32 > 1035585410.77 [12687]: Sectors/Cylinder: 256 > 1035585410.77 [12687]: Tracks/Cylinder (heads): 8 > 1035585410.77 [12687]: Cylinders: 490 > 1035585410.77 [12687]: > 1035585410.77 [12687]: Updating MBR and partition table... > 1035585410.77 [12687]: Note, you may ignore "sysctl(machdep.bios.diskinfo)" errors > if present. > 1035585410.77 [12687]: > 1035585410.77 [12687]: Installing disklabel... > 1035585410.77 [12687]: disklabel -R sd0 /tmp/_ahhr17752 > 1035585410.77 [12687]: > 1035585410.77 [12687]: Creating new filesystem... > 1035585410.78 [12687]: newfs -c 490 -S 512 -u 32 -z 8 -o space /dev/rsd0a > 1035585410.78 [12687]: There was a problem running newfs. Maybe the geometry is wrong? > # > ----------------- > > And finally, after the run, I tried it again manually: > > ------------------ > # newfs -c 490 -S 512 -u 32 -z 8 -o space /dev/rsd0a > Oct 25 17:39:59 cthulhu /bsd: sd0: mode sense (4) returned nonsense; using > fictitious geometry > Oct 25 17:39:59 cthulhu /bsd: sd0: mode sense (4) returned nonsense; using > fictitious geometry > Block size restricts cylinders per group to 285. > # disklabel sd0a > # /dev/rsd0a: > type: SCSI > disk: SCSI disk > label: ImageMate II > flags: > bytes/sector: 512 > sectors/track: 32 > tracks/cylinder: 8 > sectors/cylinder: 256 > cylinders: 490 > total sectors: 125440 > rpm: 3600 > interleave: 1 > trackskew: 0 > cylinderskew: 0 > headswitch: 0 # microseconds > track-to-track seek: 0 # microseconds > drivedata: 0 > > 16 partitions: > # size offset fstype [fsize bsize cpg] > a: 125152 32 4.2BSD 1024 8192 16 # (Cyl. 0*- 488) > b: 1 125184 swap # (Cyl. 489 - 489*) > c: 125440 0 unused 0 0 # (Cyl. 0 - 489) > # > ------------------------- > > >> If you run 'disklabel /dev/sd0' (or sd1), I think it will show you the >> parameters you need to change in flashdist.sh to use the 64MB card. >> >> Steve >> >> -----Original Message----- >> From: com...@li... >> [mailto:com...@li...]On Behalf Of Mike >> McClure >> Sent: Friday, October 25, 2002 7:21 PM >> To: com...@li... >> Subject: [Compactbsd-devel] (no subject) >> >> >> Howdy. >> >> What parameters must I change in flashdist.sh to use a 64MB CF card? >> >> Or should they be changed somewhere else? >> >> Thanks, >> >> Mike >> >> >> -- >> Mike McClure, CCIE # 5125, CISSP # 30232 >> PNE Services, Inc. - http://www.pneservices.com >> mobile: 913-636-5590 >> >> >> >> >> >> ------------------------------------------------------- >> This sf.net email is sponsored by: Influence the future >> of Java(TM) technology. Join the Java Community >> Process(SM) (JCP(SM)) program now. >> http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0004en >> _______________________________________________ >> Compactbsd-devel mailing list >> Com...@li... >> https://lists.sourceforge.net/lists/listinfo/compactbsd-devel >> >> > > > -- > Mike McClure, CCIE # 5125, CISSP # 30232 > PNE Services, Inc. - http://www.pneservices.com > mmc...@pn... > mobile: 913-636-5590 > > > > -- Mike McClure, CCIE # 5125, CISSP # 30232 PNE Services, Inc. - http://www.pneservices.com mmc...@pn... mobile: 913-636-5590 |
