Hi,
I have read the documentation but can't work this out. I have a radio which has a virtual serial port (COM8) that uses DTR to key the transmitter on and off. I need to re-direct COM8 to a physical port (COM1), and set DTR off initially. Then toggling DTR on COM1 will control the transmitter.
I would appreciate any help on how to do this.
Thanks,
Graham
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
The message you sent (attached below) requires confirmation
before it can be delivered. To confirm that you sent the
message below, just hit the "R"eply button and send this
message back (you don't need to edit anything). Once this is
done, no more confirmations will be necessary.
This email account is protected by:
Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
For more information visit http://www.paganini.net/ask
This is a multi-part message in MIME format.
--===============0999161998912294813==
Content-Type: multipart/alternative;
boundary="===============8070840293495291205=="
MIME-Version: 1.0
Hi,
I have read the documentation but can't work this out. I have a radio which has a virtual serial port (COM8) that uses DTR to key the transmitter on and off. I need to re-direct COM8 to a physical port (COM1), and set DTR off initially. Then toggling DTR on COM1 will control the transmitter.
I would appreciate any help on how to do this.
Thanks,
Graham
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
--===============8070840293495291205==
MIME-Version: 1.0
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Hi,
I have read the documentation but can't work this out. I have a radio which has a virtual serial port (COM8) that uses DTR to key the transmitter on and off. I need to re-direct COM8 to a physical port (COM1), and set DTR off initially. Then toggling DTR on COM1 will control the transmitter.
I would appreciate any help on how to do this.
Thanks,
Graham
Hi,
I have read the documentation but can't work this out. I have a radio which has a virtual serial port (COM8) that uses DTR to key the transmitter on and off. I need to re-direct COM8 to a physical port (COM1), and set DTR off initially. Then toggling DTR on COM1 will control the transmitter.
I would appreciate any help on how to do this.
Thanks,
Graham
<< IMPORTANT INFORMATION! >>
This is an automated message.
The message you sent (attached below) requires confirmation
before it can be delivered. To confirm that you sent the
message below, just hit the "R"eply button and send this
message back (you don't need to edit anything). Once this is
done, no more confirmations will be necessary.
This email account is protected by:
Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
For more information visit http://www.paganini.net/ask
--- Original Message Follows ---
To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
From: "Graham" graham999au@users.sf.net
Subject: [com0com:discussion] Newbie: hub4com connect virtual to real serial port,
Date: Tue, 18 Jul 2017 01:00:12 +0000
This is a multi-part message in MIME format.
--===============0999161998912294813==
Content-Type: multipart/alternative;
boundary="===============8070840293495291205=="
MIME-Version: 1.0
--===============8070840293495291205==
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Hi,
I have read the documentation but can't work this out. I have a radio which has a virtual serial port (COM8) that uses DTR to key the transmitter on and off. I need to re-direct COM8 to a physical port (COM1), and set DTR off initially. Then toggling DTR on COM1 will control the transmitter.
I would appreciate any help on how to do this.
Thanks,
Graham
Newbie: hub4com connect virtual to real serial port, with DTR initially off
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/com0com/discussion/440109/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
--===============8070840293495291205==
MIME-Version: 1.0
Content-Type: text/html; charset="us-ascii"
Content-Transfer-Encoding: 7bit
Hi,
I have read the documentation but can't work this out. I have a radio which has a virtual serial port (COM8) that uses DTR to key the transmitter on and off. I need to re-direct COM8 to a physical port (COM1), and set DTR off initially. Then toggling DTR on COM1 will control the transmitter.
I would appreciate any help on how to do this.
Thanks,
Graham
Newbie: hub4com connect virtual to real serial port, with DTR initially off
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/com0com/discussion/440109/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
(Original message truncated)