Menu ▾ ▴

hub4com error message

Help
samutley
2007-09-24
2013-05-20

  • samutley

    samutley - 2007-09-24

    Does anyone know what these errors mean?

    C:\>hub4com.exe \\.\COM1 \\.\CNCB0 \\.\CNCB1 Open("\\.\COM1", baud=19200, data=8, parity=no, stop=1, octs=on, odsr=off, ox=off, ix=off, idsr=off) - OK
    Open("\\.\CNCB0", baud=19200, data=8, parity=no, stop=1, octs=on, odsr=off, ox=off, ix=off, idsr=off) - OK
    Open("\\.\CNCB1", baud=19200, data=8, parity=no, stop=1, octs=on, odsr=off, ox=off, ix=off, idsr=off) - OK
    Route data COM1 --> CNCB0 CNCB1
    Route data CNCB0 --> COM1
    Route flow control COM1 --> CNCB0
    Route flow control CNCB0 --> COM1
    Started COM1
    Started CNCB0
    Started CNCB1
    Error COM1:, total RXOVER=0 OVERRUN=0 RXPARITY=0 FRAME=0
    Error COM1: FRAME, total RXOVER=0 OVERRUN=0 RXPARITY=0 FRAME=7
    Error COM1: FRAME, total RXOVER=0 OVERRUN=0 RXPARITY=0 FRAME=12
    Error COM1: RXOVER FRAME, total RXOVER=294 OVERRUN=0 RXPARITY=0 FRAME=16
    Error COM1: RXOVER FRAME, total RXOVER=1928 OVERRUN=0 RXPARITY=0 FRAME=21
    Error COM1: RXOVER FRAME, total RXOVER=3277 OVERRUN=0 RXPARITY=0 FRAME=27
    Error COM1: RXOVER FRAME, total RXOVER=4636 OVERRUN=0 RXPARITY=0 FRAME=31
    Error COM1: RXOVER FRAME, total RXOVER=5922 OVERRUN=0 RXPARITY=0 FRAME=35
    Error COM1: RXOVER FRAME, total RXOVER=7262 OVERRUN=0 RXPARITY=0 FRAME=41
    Error COM1: RXOVER, total RXOVER=8325 OVERRUN=0 RXPARITY=0 FRAME=41
    Error COM1: RXOVER FRAME, total RXOVER=9783 OVERRUN=0 RXPARITY=0 FRAME=47
    Error COM1: RXOVER FRAME, total RXOVER=11871 OVERRUN=0 RXPARITY=0 FRAME=53
    Write lost CNCB1: 257, total 257
    Error COM1: RXOVER FRAME, total RXOVER=13417 OVERRUN=0 RXPARITY=0 FRAME=58
    Error COM1: RXOVER FRAME, total RXOVER=14985 OVERRUN=0 RXPARITY=0 FRAME=62
    Error COM1: RXOVER FRAME, total RXOVER=16327 OVERRUN=0 RXPARITY=0 FRAME=66
    Error COM1: RXOVER FRAME, total RXOVER=17570 OVERRUN=0 RXPARITY=0 FRAME=68
    Error COM1: RXOVER FRAME, total RXOVER=19100 OVERRUN=0 RXPARITY=0 FRAME=74
    Error COM1: RXOVER FRAME, total RXOVER=20466 OVERRUN=0 RXPARITY=0 FRAME=80
    Error COM1: RXOVER FRAME, total RXOVER=21817 OVERRUN=0 RXPARITY=0 FRAME=89
    Error COM1: RXOVER FRAME, total RXOVER=23175 OVERRUN=0 RXPARITY=0 FRAME=94
    Error COM1: RXOVER FRAME, total RXOVER=24763 OVERRUN=0 RXPARITY=0 FRAME=96
    Error COM1: RXOVER FRAME, total RXOVER=26178 OVERRUN=0 RXPARITY=0 FRAME=105
    Error COM1: RXOVER FRAME, total RXOVER=27694 OVERRUN=0 RXPARITY=0 FRAME=106
    Error COM1: RXOVER FRAME, total RXOVER=29064 OVERRUN=0 RXPARITY=0 FRAME=110
    Error COM1: RXOVER FRAME, total RXOVER=30596 OVERRUN=0 RXPARITY=0 FRAME=117
    Error COM1: RXOVER FRAME, total RXOVER=31975 OVERRUN=0 RXPARITY=0 FRAME=119
    Error COM1: RXOVER FRAME, total RXOVER=33284 OVERRUN=0 RXPARITY=0 FRAME=122
    Error COM1: RXOVER FRAME, total RXOVER=34647 OVERRUN=0 RXPARITY=0 FRAME=127
    Error COM1: RXOVER FRAME, total RXOVER=36050 OVERRUN=0 RXPARITY=0 FRAME=130
    Error COM1: RXOVER FRAME, total RXOVER=37493 OVERRUN=0 RXPARITY=0 FRAME=136

     

    • Vyacheslav Frolov

      Vyacheslav Frolov - 2007-09-24

      > Error COM1: FRAME, total RXOVER=0 OVERRUN=0 RXPARITY=0 FRAME=7

      Possible the device (connected to COM1) and the hub4com use different COM port parametrs. For example: the baudrate of device is not 19200.

      > Write lost CNCB1: 257, total 257

      Possible no application run on paired port to CNCB1 or the application hangs.

       

Log in to post a comment.