Menu ▾ ▴

Newbie: hub4com connect virtual to real serial port, with DTR initially off

Help
Graham
2017-07-17
2017-07-18

  • Graham

    Graham - 2017-07-17

    Hi,
    I have read the documentation but can't work this out. I have a radio which has a virtual serial port (COM8) that uses DTR to key the transmitter on and off. I need to re-direct COM8 to a physical port (COM1), and set DTR off initially. Then toggling DTR on COM1 will control the transmitter.
    I would appreciate any help on how to do this.

    Thanks,
    Graham

     

    • Dennis Taylor

      Dennis Taylor - 2017-07-17

      << IMPORTANT INFORMATION! >>

      This is an automated message.

      The message you sent (attached below) requires confirmation
      before it can be delivered. To confirm that you sent the
      message below, just hit the "R"eply button and send this
      message back (you don't need to edit anything). Once this is
      done, no more confirmations will be necessary.

      This email account is protected by:
      Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
      For more information visit http://www.paganini.net/ask

      --- Original Message Follows ---

      To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
      From: "Graham" graham999au@users.sf.net
      Subject: [com0com:discussion] Newbie: hub4com connect virtual to real serial port,
      Date: Mon, 17 Jul 2017 06:06:20 +0000

      This is a multi-part message in MIME format.
      --===============9070367110460514031==
      Content-Type: multipart/alternative;
      boundary="===============5366489270405711667=="
      MIME-Version: 1.0

      --===============5366489270405711667==
      MIME-Version: 1.0
      Content-Type: text/plain; charset="us-ascii"
      Content-Transfer-Encoding: 7bit

      Hi,
      I have read the documentation but can't work this out. I have a radio which has a virtual serial port (COM8) that uses DTR to key the transmitter on and off. I need to re-direct COM8 to a physical port (COM1), and set DTR off initially. Then toggling DTR on COM1 will control the transmitter.
      I would appreciate any help on how to do this.

      Thanks,
      Graham

      Newbie: hub4com connect virtual to real serial port, with DTR initially off

      Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/com0com/discussion/440109/

      To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
      --===============5366489270405711667==
      MIME-Version: 1.0
      Content-Type: text/html; charset="us-ascii"
      Content-Transfer-Encoding: 7bit

      Hi,
      I have read the documentation but can't work this out. I have a radio which has a virtual serial port (COM8) that uses DTR to key the transmitter on and off. I need to re-direct COM8 to a physical port (COM1), and set DTR off initially. Then toggling DTR on COM1 will control the transmitter.
      I would appreciate any help on how to do this.

      Thanks,
      Graham

      Newbie: hub4com connect virtual to real serial port, with DTR initially off

      Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/com0com/discussion/440109/

      To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/

      <div itemscope itemtype="http://schema.org/EmailMessage">
<div itemprop="action" itemscope itemtype="http://schema.org/ViewAction">
  <link itemprop="url" href="https://sourceforge.net/p/com0com/discussion/440109/"></link>
  <meta itemprop="name" content="View"></meta>
</div>

      (Original message truncated)

       

      • Dennis Taylor

        Dennis Taylor - 2017-07-17

        << IMPORTANT INFORMATION! >>

        This is an automated message.

        The message you sent (attached below) requires confirmation
        before it can be delivered. To confirm that you sent the
        message below, just hit the "R"eply button and send this
        message back (you don't need to edit anything). Once this is
        done, no more confirmations will be necessary.

        This email account is protected by:
        Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
        For more information visit http://www.paganini.net/ask

        --- Original Message Follows ---

        To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
        From: "Dennis Taylor" dwtraleigh@users.sf.net
        Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
        Date: Mon, 17 Jul 2017 06:06:52 +0000

        This is a multi-part message in MIME format.
        --===============8396768341860631548==
        Content-Type: multipart/alternative;
        boundary="===============4908424210218120682=="
        MIME-Version: 1.0

        --===============4908424210218120682==
        MIME-Version: 1.0
        Content-Type: text/plain; charset="us-ascii"
        Content-Transfer-Encoding: 7bit

        << IMPORTANT INFORMATION! >>

        This is an automated message.

        The message you sent (attached below) requires confirmation
        before it can be delivered. To confirm that you sent the
        message below, just hit the "R"eply button and send this
        message back (you don't need to edit anything). Once this is
        done, no more confirmations will be necessary.

        This email account is protected by:
        Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
        For more information visit http://www.paganini.net/ask

        --- Original Message Follows ---

        To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
        From: "Graham" graham999au@users.sf.net
        Subject: [com0com:discussion] Newbie: hub4com connect virtual to real serial port,
        Date: Mon, 17 Jul 2017 06:06:20 +0000

        This is a multi-part message in MIME format.
        --===============9070367110460514031==
        Content-Type: multipart/alternative;
        boundary="===============5366489270405711667=="
        MIME-Version: 1.0

        --===============5366489270405711667==
        MIME-Version: 1.0
        Content-Type: text/plain; charset="us-ascii"
        Content-Transfer-Encoding: 7bit

        Hi,
        I have read the documentation but can't work this out. I have a radio which has a virtual serial port (COM8) that uses DTR to key the transmitter on and off. I need to re-direct COM8 to a physical port (COM1), and set DTR off initially. Then toggling DTR on COM1 will control the transmitter.
        I would appreciate any help on how to do this.

        Thanks,
        Graham

        (Original message truncated)

         

        • Dennis Taylor

          Dennis Taylor - 2017-07-17

          << IMPORTANT INFORMATION! >>

          This is an automated message.

          The message you sent (attached below) requires confirmation
          before it can be delivered. To confirm that you sent the
          message below, just hit the "R"eply button and send this
          message back (you don't need to edit anything). Once this is
          done, no more confirmations will be necessary.

          This email account is protected by:
          Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
          For more information visit http://www.paganini.net/ask

          --- Original Message Follows ---

          To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
          From: "Dennis Taylor" dwtraleigh@users.sf.net
          Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
          Date: Mon, 17 Jul 2017 06:07:20 +0000

          This is a multi-part message in MIME format.
          --===============1787141669205570841==
          Content-Type: multipart/alternative;
          boundary="===============6518973622479591625=="
          MIME-Version: 1.0

          --===============6518973622479591625==
          MIME-Version: 1.0
          Content-Type: text/plain; charset="us-ascii"
          Content-Transfer-Encoding: 7bit

          << IMPORTANT INFORMATION! >>

          This is an automated message.

          The message you sent (attached below) requires confirmation
          before it can be delivered. To confirm that you sent the
          message below, just hit the "R"eply button and send this
          message back (you don't need to edit anything). Once this is
          done, no more confirmations will be necessary.

          This email account is protected by:
          Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
          For more information visit http://www.paganini.net/ask

          --- Original Message Follows ---

          To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
          From: "Dennis Taylor" dwtraleigh@users.sf.net
          Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
          Date: Mon, 17 Jul 2017 06:06:52 +0000

          This is a multi-part message in MIME format.
          --===============8396768341860631548==
          Content-Type: multipart/alternative;
          boundary="===============4908424210218120682=="
          MIME-Version: 1.0

          --===============4908424210218120682==
          MIME-Version: 1.0
          Content-Type: text/plain; charset="us-ascii"
          Content-Transfer-Encoding: 7bit

          << IMPORTANT INFORMATION! >>

          This is an automated message.

          The message you sent (attached below) requires confirmation
          before it can be delivered. To confirm that you sent the
          message below, just hit the "R"eply button and send this

          (Original message truncated)

           

          • Dennis Taylor

            Dennis Taylor - 2017-07-17

            << IMPORTANT INFORMATION! >>

            This is an automated message.

            The message you sent (attached below) requires confirmation
            before it can be delivered. To confirm that you sent the
            message below, just hit the "R"eply button and send this
            message back (you don't need to edit anything). Once this is
            done, no more confirmations will be necessary.

            This email account is protected by:
            Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
            For more information visit http://www.paganini.net/ask

            --- Original Message Follows ---

            To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
            From: "Dennis Taylor" dwtraleigh@users.sf.net
            Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
            Date: Mon, 17 Jul 2017 06:07:45 +0000

            This is a multi-part message in MIME format.
            --===============2376261275392823197==
            Content-Type: multipart/alternative;
            boundary="===============2680429927547796684=="
            MIME-Version: 1.0

            --===============2680429927547796684==
            MIME-Version: 1.0
            Content-Type: text/plain; charset="us-ascii"
            Content-Transfer-Encoding: 7bit

            << IMPORTANT INFORMATION! >>

            This is an automated message.

            The message you sent (attached below) requires confirmation
            before it can be delivered. To confirm that you sent the
            message below, just hit the "R"eply button and send this
            message back (you don't need to edit anything). Once this is
            done, no more confirmations will be necessary.

            This email account is protected by:
            Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
            For more information visit http://www.paganini.net/ask

            --- Original Message Follows ---

            To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
            From: "Dennis Taylor" dwtraleigh@users.sf.net
            Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
            Date: Mon, 17 Jul 2017 06:07:20 +0000

            This is a multi-part message in MIME format.
            --===============1787141669205570841==
            Content-Type: multipart/alternative;
            boundary="===============6518973622479591625=="
            MIME-Version: 1.0

            --===============6518973622479591625==
            MIME-Version: 1.0
            Content-Type: text/plain; charset="us-ascii"
            Content-Transfer-Encoding: 7bit

            << IMPORTANT INFORMATION! >>

            This is an automated message.

            The message you sent (attached below) requires confirmation
            before it can be delivered. To confirm that you sent the
            message below, just hit the "R"eply button and send this

            (Original message truncated)

             

            • Dennis Taylor

              Dennis Taylor - 2017-07-17

              << IMPORTANT INFORMATION! >>

              This is an automated message.

              The message you sent (attached below) requires confirmation
              before it can be delivered. To confirm that you sent the
              message below, just hit the "R"eply button and send this
              message back (you don't need to edit anything). Once this is
              done, no more confirmations will be necessary.

              This email account is protected by:
              Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
              For more information visit http://www.paganini.net/ask

              --- Original Message Follows ---

              To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
              From: "Dennis Taylor" dwtraleigh@users.sf.net
              Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
              Date: Mon, 17 Jul 2017 06:08:17 +0000

              This is a multi-part message in MIME format.
              --===============4744171692568881113==
              Content-Type: multipart/alternative;
              boundary="===============6538314747060644028=="
              MIME-Version: 1.0

              --===============6538314747060644028==
              MIME-Version: 1.0
              Content-Type: text/plain; charset="us-ascii"
              Content-Transfer-Encoding: 7bit

              << IMPORTANT INFORMATION! >>

              This is an automated message.

              The message you sent (attached below) requires confirmation
              before it can be delivered. To confirm that you sent the
              message below, just hit the "R"eply button and send this
              message back (you don't need to edit anything). Once this is
              done, no more confirmations will be necessary.

              This email account is protected by:
              Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
              For more information visit http://www.paganini.net/ask

              --- Original Message Follows ---

              To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
              From: "Dennis Taylor" dwtraleigh@users.sf.net
              Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
              Date: Mon, 17 Jul 2017 06:07:45 +0000

              This is a multi-part message in MIME format.
              --===============2376261275392823197==
              Content-Type: multipart/alternative;
              boundary="===============2680429927547796684=="
              MIME-Version: 1.0

              --===============2680429927547796684==
              MIME-Version: 1.0
              Content-Type: text/plain; charset="us-ascii"
              Content-Transfer-Encoding: 7bit

              << IMPORTANT INFORMATION! >>

              This is an automated message.

              The message you sent (attached below) requires confirmation
              before it can be delivered. To confirm that you sent the
              message below, just hit the "R"eply button and send this

              (Original message truncated)

               

      • Graham

        Graham - 2017-07-18
         

        • Dennis Taylor

          Dennis Taylor - 2017-07-18

          << IMPORTANT INFORMATION! >>

          This is an automated message.

          The message you sent (attached below) requires confirmation
          before it can be delivered. To confirm that you sent the
          message below, just hit the "R"eply button and send this
          message back (you don't need to edit anything). Once this is
          done, no more confirmations will be necessary.

          This email account is protected by:
          Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
          For more information visit http://www.paganini.net/ask

          --- Original Message Follows ---

          To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
          From: "Graham" graham999au@users.sf.net
          Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
          Date: Tue, 18 Jul 2017 00:59:01 +0000

          This is a multi-part message in MIME format.
          --===============0018145079518472275==
          Content-Type: multipart/alternative;
          boundary="===============4920271249501589020=="
          MIME-Version: 1.0

          --===============4920271249501589020==
          MIME-Version: 1.0
          Content-Type: text/plain; charset="us-ascii"
          Content-Transfer-Encoding: 7bit

          Newbie: hub4com connect virtual to real serial port, with DTR initially off

          Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/com0com/discussion/440109/

          To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
          --===============4920271249501589020==
          MIME-Version: 1.0
          Content-Type: text/html; charset="us-ascii"
          Content-Transfer-Encoding: 7bit

          Newbie: hub4com connect virtual to real serial port, with DTR initially off

          Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/com0com/discussion/440109/

          To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/

          <div itemscope itemtype="http://schema.org/EmailMessage">
<div itemprop="action" itemscope itemtype="http://schema.org/ViewAction">
  <link itemprop="url" href="https://sourceforge.net/p/com0com/discussion/440109/"></link>
  <meta itemprop="name" content="View"></meta>
</div>
<meta itemprop="description" content="View"></meta>
</div>

          --===============4920271249501589020==--
          --===============0018145079518472275==--

           

          • Dennis Taylor

            Dennis Taylor - 2017-07-18

            << IMPORTANT INFORMATION! >>

            This is an automated message.

            The message you sent (attached below) requires confirmation
            before it can be delivered. To confirm that you sent the
            message below, just hit the "R"eply button and send this
            message back (you don't need to edit anything). Once this is
            done, no more confirmations will be necessary.

            This email account is protected by:
            Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
            For more information visit http://www.paganini.net/ask

            --- Original Message Follows ---

            To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
            From: "Dennis Taylor" dwtraleigh@users.sf.net
            Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
            Date: Tue, 18 Jul 2017 00:59:37 +0000

            This is a multi-part message in MIME format.
            --===============9006915265348814023==
            Content-Type: multipart/alternative;
            boundary="===============3656390093197518738=="
            MIME-Version: 1.0

            --===============3656390093197518738==
            MIME-Version: 1.0
            Content-Type: text/plain; charset="us-ascii"
            Content-Transfer-Encoding: 7bit

            << IMPORTANT INFORMATION! >>

            This is an automated message.

            The message you sent (attached below) requires confirmation
            before it can be delivered. To confirm that you sent the
            message below, just hit the "R"eply button and send this
            message back (you don't need to edit anything). Once this is
            done, no more confirmations will be necessary.

            This email account is protected by:
            Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
            For more information visit http://www.paganini.net/ask

            --- Original Message Follows ---

            To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
            From: "Graham" graham999au@users.sf.net
            Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
            Date: Tue, 18 Jul 2017 00:59:01 +0000

            This is a multi-part message in MIME format.
            --===============0018145079518472275==
            Content-Type: multipart/alternative;
            boundary="===============4920271249501589020=="
            MIME-Version: 1.0

            --===============4920271249501589020==
            MIME-Version: 1.0
            Content-Type: text/plain; charset="us-ascii"
            Content-Transfer-Encoding: 7bit

            Newbie: hub4com connect virtual to real serial port, with DTR initially off

            (Original message truncated)

             

            • Dennis Taylor

              Dennis Taylor - 2017-07-18

              << IMPORTANT INFORMATION! >>

              This is an automated message.

              The message you sent (attached below) requires confirmation
              before it can be delivered. To confirm that you sent the
              message below, just hit the "R"eply button and send this
              message back (you don't need to edit anything). Once this is
              done, no more confirmations will be necessary.

              This email account is protected by:
              Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
              For more information visit http://www.paganini.net/ask

              --- Original Message Follows ---

              To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
              From: "Dennis Taylor" dwtraleigh@users.sf.net
              Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
              Date: Tue, 18 Jul 2017 01:00:06 +0000

              This is a multi-part message in MIME format.
              --===============2202229103136886830==
              Content-Type: multipart/alternative;
              boundary="===============1982536605621291325=="
              MIME-Version: 1.0

              --===============1982536605621291325==
              MIME-Version: 1.0
              Content-Type: text/plain; charset="us-ascii"
              Content-Transfer-Encoding: 7bit

              << IMPORTANT INFORMATION! >>

              This is an automated message.

              The message you sent (attached below) requires confirmation
              before it can be delivered. To confirm that you sent the
              message below, just hit the "R"eply button and send this
              message back (you don't need to edit anything). Once this is
              done, no more confirmations will be necessary.

              This email account is protected by:
              Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
              For more information visit http://www.paganini.net/ask

              --- Original Message Follows ---

              To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
              From: "Dennis Taylor" dwtraleigh@users.sf.net
              Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
              Date: Tue, 18 Jul 2017 00:59:37 +0000

              This is a multi-part message in MIME format.
              --===============9006915265348814023==
              Content-Type: multipart/alternative;
              boundary="===============3656390093197518738=="
              MIME-Version: 1.0

              --===============3656390093197518738==
              MIME-Version: 1.0
              Content-Type: text/plain; charset="us-ascii"
              Content-Transfer-Encoding: 7bit

              << IMPORTANT INFORMATION! >>

              This is an automated message.

              The message you sent (attached below) requires confirmation
              before it can be delivered. To confirm that you sent the
              message below, just hit the "R"eply button and send this

              (Original message truncated)

               

              • Dennis Taylor

                Dennis Taylor - 2017-07-18

                << IMPORTANT INFORMATION! >>

                This is an automated message.

                The message you sent (attached below) requires confirmation
                before it can be delivered. To confirm that you sent the
                message below, just hit the "R"eply button and send this
                message back (you don't need to edit anything). Once this is
                done, no more confirmations will be necessary.

                This email account is protected by:
                Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
                For more information visit http://www.paganini.net/ask

                --- Original Message Follows ---

                To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
                From: "Dennis Taylor" dwtraleigh@users.sf.net
                Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
                Date: Tue, 18 Jul 2017 01:00:38 +0000

                This is a multi-part message in MIME format.
                --===============4647013460573143323==
                Content-Type: multipart/alternative;
                boundary="===============6959588388936231420=="
                MIME-Version: 1.0

                --===============6959588388936231420==
                MIME-Version: 1.0
                Content-Type: text/plain; charset="us-ascii"
                Content-Transfer-Encoding: 7bit

                << IMPORTANT INFORMATION! >>

                This is an automated message.

                The message you sent (attached below) requires confirmation
                before it can be delivered. To confirm that you sent the
                message below, just hit the "R"eply button and send this
                message back (you don't need to edit anything). Once this is
                done, no more confirmations will be necessary.

                This email account is protected by:
                Active Spam Killer (ASK) V2.4.1 - (C) 2001-2002 by Marco Paganini
                For more information visit http://www.paganini.net/ask

                --- Original Message Follows ---

                To: "[com0com:discussion] " 440109@discussion.com0com.p.re.sf.net
                From: "Dennis Taylor" dwtraleigh@users.sf.net
                Subject: [com0com:discussion] Re: Newbie: hub4com connect virtual to real serial port,
                Date: Tue, 18 Jul 2017 01:00:06 +0000

                This is a multi-part message in MIME format.
                --===============2202229103136886830==
                Content-Type: multipart/alternative;
                boundary="===============1982536605621291325=="
                MIME-Version: 1.0

                --===============1982536605621291325==
                MIME-Version: 1.0
                Content-Type: text/plain; charset="us-ascii"
                Content-Transfer-Encoding: 7bit

                << IMPORTANT INFORMATION! >>

                This is an automated message.

                The message you sent (attached below) requires confirmation
                before it can be delivered. To confirm that you sent the
                message below, just hit the "R"eply button and send this

                (Original message truncated)

                 

Log in to post a comment.