I'am tring to forward an com-port to another machine using your tools. The setup is as follows:
PC A:
Com1 is forwarded by tcp/ip using:
com2tcp \\.\COM1 XX.XXX.XXX.XXX 23
PC B:
Made an virtual com port pair in the Setup command prompt for com0com:
Install PortName=COM21 -
The I created the TCP server:
com2tcp \\.\CNCB0 23
When I try to communicate to a modem on the com-port on PC A using hyperterminal on PC B I can see that the commands are send to the com-port but I do not receive from the modem.
Kind regards,
Ernst.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
I'am tring to forward an com-port to another machine using your tools. The setup is as follows:
PC A:
Com1 is forwarded by tcp/ip using:
com2tcp \\.\COM1 XX.XXX.XXX.XXX 23
PC B:
Made an virtual com port pair in the Setup command prompt for com0com:
Install PortName=COM21 -
The I created the TCP server:
com2tcp \\.\CNCB0 23
When I try to communicate to a modem on the com-port on PC A using hyperterminal on PC B I can see that the commands are send to the com-port but I do not receive from the modem.
Kind regards,
Ernst.