From: Henry N. <Henry.Ne@Arcor.de> - 2005-10-21 09:39:42
|
Klaus Strebel wrote: > cobd0=3D\HardDisk0\Partition6 > cobd1=3D\HardDisk0\Partition5 > hda6=3D:cobd0 > hda5=3D:cobd1 > root=3D/dev/cobd0 >=20 > but start message shows this: >=20 > mapping cobd0 to \??\C:\Programme\coLinux\HardDisk0\Partition6 > mapping cobd1 to \??\C:\Programme\coLinux\HardDisk0\Partition5 Colinux detect your image as file. For using partions should start with "\Device". hda6=3D\Device\Harddisk0\Partition6 hda5=3D\Device\Harddisk0\Partition5 root=3D/dev/hda6 > DISKPART> list partition >=20 > Partition Typ Gr=F6=DFe Offset > ------------- ---------------- ------- ------- > Partition 1 OEM 78 MB 32 KB > Partition 2 Prim=E4r 25 GB 78 MB > Partition 3 Erweitert 50 GB 25 GB The "Partition 3 Erweitert" is not counted under the windows Syntax=20 \Device\HarddiskX\PartitionY. I think, but not shure. > Partition 4 Logisch 19 GB 25 GB > Partition 5 Logisch 1028 MB 44 GB > Partition 6 Logisch 643 MB 45 GB > Partition 7 Logisch 28 GB 45 GB > Partition 8 Logisch 1404 MB 73 GB >=20 > Partition 5 is my swap and Partition 6 is my root ;-), partition 7 is m= y=20 > LVM2 pvvol. >=20 > any ideas. Extended partion should not count under Windows. Try this: hda6=3D\Device\Harddisk0\Partition5 hda5=3D\Device\Harddisk0\Partition4 Other idea: Download a debian or other small image, set all your partions to a cobd=20 or hda alias, boot colinux from image file, try to mount any of the=20 partion, look into mounted partion to find the right number. --=20 Henry Nestler |