From: Kevin <kjs...@ya...> - 2006-08-20 19:56:39
|
Pentium D 830 also blue screens unless DEP is disabled (on 0.6.3, haven't tried 0.6.4). The D 830 is listed at http://www.intel.com/products/processor_number/chart/pentium_d.htm. Kevin > On 5/27/06, Kevin wrote: > > On a P4 Model 521 neither /noexecute=OptIn nor > /noexecute=OptOut with > > colinux excepted, set via Performance Options GUI as > suggested by the > > two links below, worked to avoid blue screen. Only putting > > /noexecute=AlwaysOff in the boot.ini file allowed me to > start colinux. > > I'd much prefer OptOut so if there's a fix please let me know. > > > > The P4 521 is included in this list: > > > http://www.intel.com/products/processor_number/index_sitelet_view2.htm > > Intel's Processor Identification Utility can be found here: > > > http://support.intel.com/support/processors/tools/piu/sb/CS-014921.htm > > > > Kevin, > > I wasn't sure that just opting out the colinux binary was > enough, and it turns out I'm right. You can't opt-out an > driver, so the kernel driver part of coLinux is still causing > problem. That's why ultimately the boot.init > /NoExecute=AlwaysOff works, where the others don't. > > Thanks for identifying your type or processor. This will > allow use to dig into the details of the processors that seem > to having this problem and allow use to make a proper > correction in coLinux's code... > Once this is done, then the less than desirable work-around of using > /NoExecute=AlwaysOff will be a thing of the past... Thanks for > everyone who has stuck with us as we painstakingly work > through this problem. > > -- > George |