Menu
▾
▴
Re: [coLinux-devel] Utilising pre-installed Linux...
|
From: Regis N. <re...@ho...> - 2004-02-16 15:58:55
|
Do a little search in regedit, you'll prolly find the name of each current devices of your config Regis ----- Original Message ----- From: "Benoit MICHEL" <ben...@cg...> To: <col...@li...> Sent: Monday, February 16, 2004 7:43 AM Subject: Re: [coLinux-devel] Utilising pre-installed Linux... > this is logic ;-) > Does windows name scsi drives like this?? > for ex, two IDE disks and one scsi one, will windows name the scsi drive > \\Device\harddisk3\VolumeX ? > and, what about cdrom drives? \\Device\cdromX ? is that right? > thx > Benoit > > ----- Original Message ----- > From: "Richard Goodwin" <ric...@ri...> > To: <col...@li...> > Sent: Monday, February 16, 2004 4:30 PM > Subject: Re: [coLinux-devel] Utilising pre-installed Linux... > > > > Well you must also ask yourself "how many hard drives, and how many > > partitions on each?" If you have only one hard drive, and the target > > partition is the 4th one on there, then of course you need to modify the > > device name :-) > > > > ----- Original Message ----- > > From: "Benoit MICHEL" <ben...@cg...> > > To: <col...@li...> > > Sent: Monday, February 16, 2004 9:03 AM > > Subject: Re: [coLinux-devel] Utilising pre-installed Linux... > > > > > > > ok thx, it runs now > > > > > > I'm trying to boot using debian file as cobd0 and > > \\Device\harddisk2\Volume2 > > > as cobd1 (this is just a partition without any fs on it, want to format > it > > > with mkfs.ext3 to begin my own install ;) ) > > > but anytime, it returns can't open device...... > > > I gonna look further tonight, till i'm at work now ;) > > > Benoit > > > > > > > > > > > > > > > ----- Original Message ----- > > > From: "Richard Goodwin" <ric...@ri...> > > > To: <col...@li...> > > > Sent: Monday, February 16, 2004 3:35 PM > > > Subject: Re: [coLinux-devel] Utilising pre-installed Linux... > > > > > > > > > > \\Device\harddisk2\Volume2 is Window's internal object name for that > > > > partition. If it is set at Index 0 in the XML file, then it becomes > > > > presented by the Linux kernel as cobd0 once inside the partition. Thus > > > some > > > > manual hacking may be required (fstab, etc) I believe to make your > > > existing > > > > Linux partition boot properly. (cobd0 = coLinux block device 0 IIRC) > > > > > > > > By the way, my in-laws are named Benoit :-) > > > > > > > > ----- Original Message ----- > > > > From: "Benoit MICHEL" <ben...@cg...> > > > > To: <col...@li...> > > > > Sent: Monday, February 16, 2004 7:53 AM > > > > Subject: Re: [coLinux-devel] Utilising pre-installed Linux... > > > > > > > > > > > > > hi > > > > > > > > > > what about /dev/hdc2 ?? > > > > > \Device\Harddisk2\Volume2? > > > > > i'm not able to fully boot with others devices declared as enabled > in > > > the > > > > > config file. > > > > > seems to freeze on co-net > > > > > Benoit > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > From: "Regis NEBOR" <re...@ho...> > > > > > To: <col...@li...> > > > > > Sent: Monday, February 16, 2004 1:48 PM > > > > > Subject: Fw: [coLinux-devel] Utilising pre-installed Linux... > > > > > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: "Regis NEBOR" <re...@ho...> > > > > > > To: "Chakat Sandwalker" <san...@e3...> > > > > > > Sent: Monday, February 16, 2004 2:43 AM > > > > > > Subject: Re: [coLinux-devel] Utilising pre-installed Linux... > > > > > > > > > > > > > > > > > > > Hi > > > > > > > > > > > > > > This config file allowed me to boot on my /dev/hda2 : > > > > > > > > > > > > > > <?xml version="1.0" encoding="UTF-8"?> > > > > > > > <colinux> > > > > > > > <block_device index="0" path="\Device\HarddiskVolume2" > > > > > enabled="true"> > > > > > > > </block_device> > > > > > > > <bootparams>root=/dev/cobd0</bootparams> > > > > > > > <image path="vmlinux"></image> > > > > > > > </colinux> > > > > > > > > > > > > > > But the kernel will remain colinux's one. You'll have to change > > some > > > > > > setting > > > > > > > in the previous setup too. > > > > > > > I would say getting an image made with colinux in mind is easier > > at > > > > the > > > > > > > moment. > > > > > > > > > > > > > > Regis > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > > From: "Chakat Sandwalker" <san...@e3...> > > > > > > > To: <col...@li...> > > > > > > > Sent: Monday, February 16, 2004 1:56 AM > > > > > > > Subject: [coLinux-devel] Utilising pre-installed Linux... > > > > > > > > > > > > > > > > > > > > > > I was told that I could save myself an 18MB download (and a > gig > > of > > > > > space > > > > > > > > on a small C:) by using my installation of Mandrake 9.1 > instead. > > > > > > > > However, I can't figure out how to edit the XML file to point > to > > > the > > > > > > > > Linux partitions in order for it to boot. I'm running a dual > > boot > > > > > > > > system (XP and Mandrake), and I don't know too much about > Linux > > to > > > > go > > > > > > > > mucking about with it. Can anyone help? > > > > > > > > > > > > > > > > Sandy > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > > > > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > > > > > > > > Build and deploy apps & Web services for Linux with > > > > > > > > a free DVD software kit from IBM. Click Now! > > > > > > > > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > > > > > > > > _______________________________________________ > > > > > > > > coLinux-devel mailing list > > > > > > > > coL...@li... > > > > > > > > https://lists.sourceforge.net/lists/listinfo/colinux-devel > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > > > > > > Build and deploy apps & Web services for Linux with > > > > > > a free DVD software kit from IBM. Click Now! > > > > > > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > > > > > > _______________________________________________ > > > > > > coLinux-devel mailing list > > > > > > coL...@li... > > > > > > https://lists.sourceforge.net/lists/listinfo/colinux-devel > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > > > > > Build and deploy apps & Web services for Linux with > > > > > a free DVD software kit from IBM. Click Now! > > > > > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > > > > > _______________________________________________ > > > > > coLinux-devel mailing list > > > > > coL...@li... > > > > > https://lists.sourceforge.net/lists/listinfo/colinux-devel > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------- > > > > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > > > > Build and deploy apps & Web services for Linux with > > > > a free DVD software kit from IBM. Click Now! > > > > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > > > > _______________________________________________ > > > > coLinux-devel mailing list > > > > coL...@li... > > > > https://lists.sourceforge.net/lists/listinfo/colinux-devel > > > > > > > > > > > > ------------------------------------------------------- > > > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > > > Build and deploy apps & Web services for Linux with > > > a free DVD software kit from IBM. Click Now! > > > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > > > _______________________________________________ > > > coLinux-devel mailing list > > > coL...@li... > > > https://lists.sourceforge.net/lists/listinfo/colinux-devel > > > > > > > > > > > > > > ------------------------------------------------------- > > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > > Build and deploy apps & Web services for Linux with > > a free DVD software kit from IBM. Click Now! > > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > > _______________________________________________ > > coLinux-devel mailing list > > coL...@li... > > https://lists.sourceforge.net/lists/listinfo/colinux-devel > > > > ------------------------------------------------------- > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > Build and deploy apps & Web services for Linux with > a free DVD software kit from IBM. Click Now! > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > _______________________________________________ > coLinux-devel mailing list > coL...@li... > https://lists.sourceforge.net/lists/listinfo/colinux-devel > |
