[coLinux-users] ifup: Cannot get driver information: Operation not supported

[Vincent M. <Vin...@un...>]

Hi,

I installed coLinux-0.6.1 on my windows XP, with=20
colinux_minimal_fedora_core_1
I can access to colinux console, but I haven't network access.

When I try a 'ifup eth0', I have this error :
ifup: Cannot get driver information: Operation not supported

Here's my configurations :

1) hardware
- an adsl router. Gateway =3D 10.0.0.138

- original ipconfig :
ipconfig :
Carte Ethernet Pont r=E9seau:

        Suffixe DNS propre =E0 la connexion : lan
        Adresse IP. . . . . . . . . . . . : 10.0.0.100
        Masque de sous-r=E9seau . . . . . . : 255.0.0.0
        Passerelle par d=E9faut . . . . . . : 10.0.0.138


- I put original lan connection and tap-win32 connection in a bridge


2) colinux

colinux.xml :
<?xml version=3D"1.0" encoding=3D"UTF-8"?>
<colinux>
    <block_device index=3D"0"=20
path=3D"\DosDevices\c:\soft\colinux\fc1_2GB_root" enabled=3D"true">
    </block_device>
    <block_device index=3D"7"=20
path=3D"\DosDevices\c:\soft\colinux\swap_device" enabled=3D"true">
    </block_device>
    <bootparams>ro root=3D/dev/cobd0</bootparams>
    <image path=3D"vmlinux"></image>
    <memory size=3D"128"></memory>
    <network index=3D"0" type=3D"tap" name=3D"TAP" />
    </network>
</colinux>

[root@colinux root]# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=3Deth0
BOOTPROTO=3Dstatic
BROADCAST=3D10.255.255.255
IPADDR=3D10.0.0.200
GATEWAY=3D10.0.0.100
NETMASK=3D255.0.0.0
NETWORK=3D10.0.0.0
ONBOOT=3Dyes

[root@colinux root]# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:43:4F:4E:45:30
          inet addr:10.0.0.200  Bcast:10.255.255.255  Mask:255.0.0.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:168 (168.0 b)
          Interrupt:2


[root@colinux root]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use=20
Iface
169.254.0.0     *               255.255.0.0     U     0      0        0 e=
th0
10.0.0.0        *               255.0.0.0       U     0      0        0 e=
th0
127.0.0.0       *               255.0.0.0       U     0      0        0 l=
o
default         10.0.0.100      0.0.0.0         UG    0      0        0 e=
th0


I can't ping 10.0.0.100, or 10.0.0.138


What can I do to treat this problem ?

Regards

Vincent

--=20
Vincent MATHIEU
Universit=E9 Nancy 2 - CRI
Equipe syst=E8me et r=E9seaux
tel : 03 83 39 64 04
coordonn=E9es : http://www.univ-nancy2.fr/ANNU/detail_pres.php?uid=3Dvmat=
hieu=09