Menu
▾
▴
Re: [coLinux-users] colinux with fedora
|
From: John F. <J.P...@as...> - 2004-10-01 10:43:16
|
Henry Thanks for the information. It wasn't as bad as that, as it did work without the modules. I started with FC1 and 0.6.1 and upgraded, first to 20040910 snapshot and then to FC2, but always have had a working system. The modules have gone in cleanly. Thanks John Date sent: Thu, 30 Sep 2004 17:07:40 +0200 From: Henry Nestler <Hen...@Ar...> To: John Fletcher <J.P...@as...> Copies to: col...@li... Subject: Re: [coLinux-users] colinux with fedora > Yes, your image had perhaps modules for older kernel. Your network > would not work. You need an update of /lib/modules into image. To do > this, You need a running linux, but not from this image self. > > Go on linux, or run Linux from other PC or boot Linux from Knoppix, > login as root Mount your Image fc1_2GB_root.out as loop > # mkdir /tmp/fc1 > # mount -o loop /PathToFile/fc1_2GB_root.out /tmp/fc1 > Extraxt the kernel modules into the mounted image > # cd /tmp/fc1 > # tar xfz /PathToFile/vmlinux-modules.tar.gz > # cd / > You will find your missing file modules.dep and directory for Kernel > modules now, check this > # ls -la /tmp/fc1/lib/modules/2.4.26-co-0.6.1 > Unmount the loop image > # umount /tmp/fc1 > > Now ist the file fc1_2GB_root.out ready to use. > Copy it to your PC for running under Windows. > > > John Fletcher wrote: > > I am using the 20040910 snapshot with Fedora Core 2. I get the > > message about the missing modules but it runs O.K. I use the ro as > > suggested below. > > > > Is there a module file to use with this setup and if so where is it? > > > > Thanks > > > > John > > > > From: Henry Nestler <Hen...@Ar...> > > To: Walter <cur...@sa...> > > Copies to: col...@li... > > Subject: Re: [coLinux-users] colinux with fedora > > Date sent: Thu, 30 Sep 2004 10:13:45 +0200 > > > > > >>Walter wrote: > > > > > > > >>You have not installed Modules for this CoLinux on your image. > >>Please extract vmlinux-modules.tar.gz after running your image. > >> > >> > >>>Checking root filesystem > >>>/dev/cobd0 is mounted. e2fsck: Cannot contiue, aborting. > >> > >>Add option "ro" to start of coLinux kernel. > >> <bootparams>ro root=/dev/cobd0</bootparams> > >> > > ------------------------------------------------------------------- > > Dr John P. Fletcher Tel: (44) 121 359 3611 ext 4625 > > Chemical Engineering and Applied Chemistry (CEAC), School of > > Engineering and Applied Science (SEAS), Aston University, > > Fax: (44) 121 359 4094 Aston Triangle, Email: > > J.P...@as... BIRMINGHAM B4 7ET U.K. CEAC Web site > > http://www.ceac.aston.ac.uk/ > > > > -- > Henry Nestler > ------------------------------------------------------------------- Dr John P. Fletcher Tel: (44) 121 359 3611 ext 4625 Chemical Engineering and Applied Chemistry (CEAC), School of Engineering and Applied Science (SEAS), Aston University, Fax: (44) 121 359 4094 Aston Triangle, Email: J.P...@as... BIRMINGHAM B4 7ET U.K. CEAC Web site http://www.ceac.aston.ac.uk/ |
