Menu
▾
▴
[coLinux-users] RE: coLinux-users digest, Vol 1 #131 - 10 msgs
|
From: Praveen K. J. N. <pra...@no...> - 2004-09-21 06:39:28
|
Hi Martin,
I did exactly what you said but I'm still unable to connect my coLinux to
Internet using the VPN.
Here's what I did:
My real network card's IP address: 10.112.7.224
Gateway: 10.112.7.7
Net Mask: 255.255.255.0
I assigned the IP 10.112.7.253 to my TAP adapter in windows (Net mask:
255.255.255.0).
Then made the following settings to the /etc/network/interfaces file of
coLinux:
auto lo eth0 eth1
iface eth0 inet static
address 10.112.7.254
netmask 255.255.255.0
iface eth1 inet static
address 10.112.7.224
netmask 255.255.255.0
Also my default.colinux.xml file reads as
<network index="0" type="tap" name="TAP"></network>
<network index="1" name="VIA Rhine II Fast Ethernet Adapter"
type="bridged"></network>
Please let me know, if I am making a mistake anywhere because the above
settings doesn't work for me.
Regards,
Praveen
-----Original Message-----
From: col...@li...
[mailto:col...@li...] On Behalf Of
col...@li...
Sent: Tuesday, September 21, 2004 8:56 AM
To: col...@li...
Subject: coLinux-users digest, Vol 1 #131 - 10 msgs
Send coLinux-users mailing list submissions to
col...@li...
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/colinux-users
or, via email, send a message with subject or body 'help' to
col...@li...
You can reach the person managing the list at
col...@li...
When replying, please edit your Subject line so it is more specific
than "Re: Contents of coLinux-users digest..."
Today's Topics:
1. VPN access problem. (Praveen Kumar Jha, Noida)
2. coLinux Gentoo emerge of Perl (Steve Frank)
3. Re: create shortcuts on desktop (Samir Kuthiala)
4. Re: coLinux Gentoo emerge of Perl (Joe Wells reverse mailbox letters
for non-public replies
)
5. Re: VPN access problem. (Martin Kanich)
6. Processor limit on coLinux? (Steve Frank)
7. Re: bridged networking with wireless? (Milind Kamble)
8. Re: Processor limit on coLinux? (Nuno Lucas)
9. Re: Re: error: alias already used (Nuno Lucas)
--__--__--
Message: 1
From: "Praveen Kumar Jha, Noida" <pra...@no...>
To: col...@li...
Date: Mon, 20 Sep 2004 13:22:29 +0530
Subject: [coLinux-users] VPN access problem.
Hi,
I have successfully installed coLinux (Debian) on my Win 2k PC. I used the
bridged method of connection.
Everything thing works fine and I can ping the other PC's of my network from
coLinux but the problem is that
I use VPN to connect to the Internet.
With coLinux, if I enable the connection sharing of the real network card I
am no longer able to login to my VPN
account. Please help me in connecting to the Internet with VPN so that I can
download and Install packages
like Apache, PHP and Mysql.
Thanks in advance.
>Praveen
--__--__--
Message: 2
Date: Mon, 20 Sep 2004 08:42:26 -0500
From: "Steve Frank" <ste...@be...>
To: <col...@li...>
Subject: [coLinux-users] coLinux Gentoo emerge of Perl
This is a multi-part message in MIME format.
------_=_NextPart_001_01C49F17.AAB69BBE
Content-Type: text/plain;
charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable
Discussed back in May on the developers list was the issue of the
failure to run the tests for Perl installation on Gentoo. I'm very new
to Gentoo (but old to Redhat), so I'm having a bear of getting this to
install. It gets to the lib/Benchmark after failing the HiRes time
stuff. I'm using 0.6.1. Any pointers on getting this to go?
=20
Steve
=20
------_=_NextPart_001_01C49F17.AAB69BBE
Content-Type: text/html;
charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dus-ascii">
<META content=3D"MSHTML 6.00.2900.2180" name=3DGENERATOR></HEAD>
<BODY>
<DIV><SPAN class=3D528093913-20092004><FONT face=3DArial =
size=3D2>Discussed back in=20
May on the developers list was the issue of the failure to run the =
tests=20
for Perl installation on Gentoo. I'm very new to Gentoo (but old to =
Redhat), so=20
I'm having a bear of getting this to install. It gets to the =
lib/Benchmark after=20
failing the HiRes time stuff. I'm using 0.6.1. Any =
pointers on=20
getting this to go?</FONT></SPAN></DIV>
<DIV><SPAN class=3D528093913-20092004><FONT face=3DArial=20
size=3D2></FONT></SPAN> </DIV>
<DIV><SPAN class=3D528093913-20092004><FONT face=3DArial=20
size=3D2>Steve</FONT></SPAN></DIV>
<DIV><SPAN class=3D528093913-20092004></SPAN> </DIV></BODY></HTML>
------_=_NextPart_001_01C49F17.AAB69BBE--
--__--__--
Message: 3
Date: Mon, 20 Sep 2004 22:50:20 +0800
From: Samir Kuthiala <sam...@gm...>
Reply-To: Samir Kuthiala <sam...@gm...>
To: Olivier Souiry <co...@a-...>
Subject: Re: [coLinux-users] create shortcuts on desktop
Cc: col...@li...
Thanks. It works.
On Mon, 20 Sep 2004 04:52:19 +0100, Olivier Souiry <co...@a-...>
wrote:
>
>
>
> ----- Original Message -----
> From: "Samir Kuthiala" <sam...@gm...>
> To: <col...@li...>
> Sent: Saturday, September 18, 2004 2:31 PM
> Subject: [coLinux-users] create shortcuts on desktop
>
> > Hi
> >
> > I have got the latest colinux working on my comp along with
> > colinuxManager (which is quite a useful prog). The new version seems
> > to be much faster as compared to 0.6.1. I am using X-win32 as my
> > windows x-server. Is there any way of creating shortcuts to various
> > linux apps on the windows desktop?
> >
> > Thx
> > Samir
>
>
> Indeed :
>
> first, create a session with XUTIL32, using rexec and a command like :
>
> DISPLAY=$MYIP:1 /usr/X11R6/bin/xterm
>
> if your X-Win32 display is :1, use :0 if you want. put a password if you
> don't want to enter it each time.
>
> (you may want to install a rexec server and add a few hosts to /etc/hosts
in
> order to give a machine name to your Windows ip in your subnetwork,
> (typically 192.168.0.1), Starnet (X-Win32 editor) describes it as a
> shortcoming of Linux's rexec implementation.)
>
> once that works, you can create a shortcut containing :
>
> C:\Prog2\XWin32\xwin32.exe xtermsession, where xtermsession is the name of
> the session you just created.
>
> there may be a safer way to do this, but this one works fine.
>
> Regards, Olivier Souiry
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: YOU BE THE JUDGE. Be one of 170
> Project Admins to receive an Apple iPod Mini FREE for your judgement on
> who ports your project to Linux PPC the best. Sponsored by IBM.
> Deadline: Sept. 24. Go here: http://sf.net/ppc_contest.php
> _______________________________________________
> coLinux-users mailing list
> coL...@li...
> https://lists.sourceforge.net/lists/listinfo/colinux-users
>
--__--__--
Message: 4
To: Steve Frank <ste...@be...>
Cc: <col...@li...>
From: sl...@bl... (Joe Wells (reverse mailbox letters for
non-public replies))
Date: 20 Sep 2004 16:29:57 +0100
Subject: Re: [coLinux-users] coLinux Gentoo emerge of Perl
"Steve Frank" <ste...@be...> writes:
> Discussed back in May on the developers list was=C2=A0the issue of the fa=
ilure to
> run the tests for Perl installation on Gentoo. I'm very new to
> Gentoo (but old to Redhat), so I'm having a bear of getting this to
> install. It gets to the lib/Benchmark after failing the HiRes time
> stuff.=C2=A0=C2=A0 I'm using 0.6.1.=C2=A0 Any pointers on getting this to=
go?
Just kill the Perl process running the lib/Benchmark test to allow the
installation to proceed.
The long-term fix is to upgrade to the latest coLinux snapshot which
has fixes for the system time issues that the Perl self tests are
(correctly!) detecting.
--=20
Joe
--__--__--
Message: 5
To: col...@li...
From: Martin Kanich <ka...@po...>
Date: Mon, 20 Sep 2004 18:34:29 +0200
Subject: [coLinux-users] Re: VPN access problem.
Hallo,
there's a connection setup option that could help you. Do not use
connection sharing on your real card. instead use following in you
colinux-config.xml:
<network index="0" type="tap" name="TAP CoLinux" />
<network index="1" type="bridged" name="your real network card
connection" />
and in /etc/interfaces (on colinux-debian) add line
auto lo eth0 eth1
maybe you have just to add eth1 to that line
the next is to have this line there:
iface eth0 inet static
address 192.168.1.2
netmask 255.255.255.0
iface eth1 inet static
address 192.168.0.40
netmask 255.255.255.0
and in windows configure IP for your TAP Colinux with 192.168.1.1 and
same netmask.
It works for me, it can for you.
You can also swap those adapters, you don't need to have anyone assigned
as 1st.
Regards,
Martin
--__--__--
Message: 6
Date: Mon, 20 Sep 2004 14:46:41 -0500
From: "Steve Frank" <ste...@be...>
To: <col...@li...>
Subject: [coLinux-users] Processor limit on coLinux?
This is a multi-part message in MIME format.
------_=_NextPart_001_01C49F4A.8D251E89
Content-Type: text/plain;
charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable
Is it possible to somehow processor limit how much CPU coLinux gets? On
my Athlon64 box, it gobbles up all it can. On my P4 desktop with
Hyperthreading, it's getting 50% cpu which I guess is a byproduct of the
hyperthreading enabled.
=20
Thanks! =20
=20
=20
------_=_NextPart_001_01C49F4A.8D251E89
Content-Type: text/html;
charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; =
charset=3Dus-ascii">
<META content=3D"MSHTML 6.00.2900.2180" name=3DGENERATOR></HEAD>
<BODY>
<DIV><SPAN class=3D411234519-20092004><FONT face=3DArial size=3D2>Is it =
possible to=20
somehow processor limit how much CPU coLinux gets? On my Athlon64 box, =
it=20
gobbles up all it can. On my P4 desktop with Hyperthreading, it's =
getting 50%=20
cpu which I guess is a byproduct of the hyperthreading=20
enabled.</FONT></SPAN></DIV>
<DIV><SPAN class=3D411234519-20092004><FONT face=3DArial=20
size=3D2></FONT></SPAN> </DIV>
<DIV><SPAN class=3D411234519-20092004><FONT face=3DArial =
size=3D2>Thanks! =20
</FONT></SPAN></DIV>
<DIV><SPAN class=3D411234519-20092004><FONT face=3DArial=20
size=3D2></FONT></SPAN> </DIV>
<DIV><SPAN class=3D411234519-20092004><FONT face=3DArial=20
size=3D2></FONT></SPAN> </DIV></BODY></HTML>
------_=_NextPart_001_01C49F4A.8D251E89--
--__--__--
Message: 7
Date: Mon, 20 Sep 2004 14:54:29 -0700 (PDT)
From: Milind Kamble <mb...@ya...>
Subject: Re: [coLinux-users] bridged networking with wireless?
To: Samir Kuthiala <sam...@gm...>,
col...@li...
I don't think it is possible to get 2 ip addresses
associated with one wireless link. Hence bridging does
not work with wireless interface. I have coLinux
working with XP using ICS on wireless link. Because of
that I have also reverted to using ICS with wired LAN
too.
--- Samir Kuthiala <sam...@gm...> wrote:
> Hey,
>
> has anyone got bridged network working with
> wireless?
>
> Samir
>
>
>
-------------------------------------------------------
> This SF.Net email is sponsored by: YOU BE THE JUDGE.
> Be one of 170
> Project Admins to receive an Apple iPod Mini FREE
> for your judgement on
> who ports your project to Linux PPC the best.
> Sponsored by IBM.
> Deadline: Sept. 24. Go here:
> http://sf.net/ppc_contest.php
> _______________________________________________
> coLinux-users mailing list
> coL...@li...
>
https://lists.sourceforge.net/lists/listinfo/colinux-users
>
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail
--__--__--
Message: 8
Date: Mon, 20 Sep 2004 23:02:05 +0100
From: Nuno Lucas <lu...@nl...>
To: Steve Frank <ste...@be...>
Cc: col...@li...
Subject: Re: [coLinux-users] Processor limit on coLinux?
Steve Frank, dando pulos de alegria, escreveu :
> Is it possible to somehow processor limit how much CPU coLinux gets? On
> my Athlon64 box, it gobbles up all it can. On my P4 desktop with
> Hyperthreading, it's getting 50% cpu which I guess is a byproduct of the
> hyperthreading enabled.
Colinux runs as a normal windows application, so it uses what it can as
any other windows application, unless it is idle.
Right now, it is coded to use only one of the cpu's, so on HT machines,
it seems to use just 50% CPU. This number is not very reliable, as HT
machines are not true SMP computers.
This is because there were some reports of colinux not doing well with
HT machines. It seems to be fixed now, but I don't think it was tested
yet.
If you want to limit CPU usage for colinux, you can do the same as for
other windows applications: use the task manager and decrease it's
priority. But note that you probably will not gain anything with it.
If you decide you want to test if the HT code is working now, define a
global environment variable COLINUX_NO_SMP_WORKAROUND as "Y", i.e.,
"COLINUX_NO_SMP_WORKAROUND=Y".
Regards,
~Nuno Lucas
--__--__--
Message: 9
Date: Tue, 21 Sep 2004 00:22:27 +0100
From: Nuno Lucas <lu...@nl...>
To: Samir Kuthiala <sam...@gm...>
Cc: col...@li...
Subject: Re: [coLinux-users] Re: error: alias already used
Samir Kuthiala, dando pulos de alegria, escreveu :
> hello,
>
> has anyone seen this error before? any ideas?
>
> ~Samir
Only idea I have is to try to comment the initrd stuff and see if it
works that way.
Regards,
~Nuno Lucas
--__--__--
_______________________________________________
coLinux-users mailing list
coL...@li...
https://lists.sourceforge.net/lists/listinfo/colinux-users
End of coLinux-users Digest
|
