Menu
▾
▴
[coLinux-users] Upgrade to 0.6.2 pre 1 - network problem SOLVED
|
From: John F. <J.P...@as...> - 2004-09-15 12:46:49
|
My apologies. The problem was that the Internet Connection sharing was not set up correctly as a result of the change of Local Area Connection. I hope this helps someone else. John ------- Forwarded message follows ------- From: John Fletcher <J.P...@as...> To: col...@li... Subject: Upgrade to 0.6.2 pre 1 - network problem Date sent: Wed, 15 Sep 2004 13:33:14 +0100 Upgrading to 0.6.2. pre 1 on Windows 2000 with Fedora 1 image. I have uninstalled 0.6.1 and installed snapshot 20040910 in its place. I first made sure I had removed both the service and the driver of the old version. The install went fine and the new colinux worked first time with the same configure file to my Fedora 1 image. First problem. VNC could not locate it. This is because the new installation had created a new Local Area Connection 3 alongside the old one which had not been removed in the uninstall process. I set up the new connection with correct IP number and VNC now works. Second problem. I cannot connect from colinux to the outside world e.g. yum list updates hangs. This is because it cannot see the outside world (ping fails). It could before. Also, I cannot delete the old Local Area Connection 2. What has changed? Thanks John ------- End of forwarded message --------------------------------------------- ----------------------------- Dr John P. Fletcher Tel: (44) 121 359 3611 ext 4625 Chemical Engineering and Applied Chemistry (CEAC), School of Engineering and Applied Science (SEAS), Aston University, Fax: (44) 121 359 4094 Aston Triangle, Email: J.P...@as... BIRMINGHAM B4 7ET U.K. CEAC Web site http://www.ceac.aston.ac.uk/ |
