[coLinux-users] dual boot under colinux SOS !!!

[Jucheng z. <zh...@ya...>]

hi,
I am trying to get my gentoo(dual boot partition)
runing under the colinux but I got bunch of I/O
errors.

my default.colinux.xml looks like
<!-- root partition /dev/hda4 -->
<block_device index="4"
path="\Device\Harddisk0\Partition4" enabled="true" /> 
<!-- swap partition /dev/hda3 -->
<block_device index="3"
path="\Device\Harddisk0\Partition3" enabled="true" /> 
<!-- boot partition /dev/hda2-->
<block_device index="2"
path="\Device\Harddisk0\Partition2" enabled="true" /> 
<bootparams>root=/dev/cobd4</bootparams>
<image path="vmlinux" /> 

my /etc/fstab looks like

...
/dev/cobd2 /boot ext2 noauto,noatime 0 0
/dev/cobd3 none  swap sw 0 0
/dev/cobd4 /     ext3 noatime 0 0

here is my dos prompt error messages.

kjournald starting.  Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running
e2fsck is recommended
EXT3 FS 2.4-0.9.19, 19 August 2002 on cobd(117,4),
internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing unused kernel memory: 52k freed
end_request: I/O error, dev 75:04 (cobd), sector
31981608
EXT3-fs error (device cobd(117,4)):
ext3_get_inode_loc: unable to read inode block -
inode=1991158, block=3997701
Warning: unable to open an initial console.
end_request: I/O error, dev 75:04 (cobd), sector
29360144
EXT3-fs error (device cobd(117,4)):
ext3_get_inode_loc: unable to read inode block -
inode=1827870, block=3670018
end_request: I/O error, dev 75:04 (cobd), sector
31981608
EXT3-fs error (device cobd(117,4)):
ext3_get_inode_loc: unable to read inode block -
inode=1991158, block=3997701
EXT3-fs error (device cobd(117,4)) in
ext3_reserve_inode_write: IO failure
end_request: I/O error, dev 75:04 (cobd), sector
29360144
EXT3-fs error (device cobd(117,4)):
ext3_get_inode_loc: unable to read inode block -
inode=1827870, block=3670018
EXT3-fs error (device cobd(117,4)) in
ext3_reserve_inode_write: IO failure
Restarting system.
daemon: monitor tconet-daemon: auto selecting TAP
conet-daemon: found TAP device named "Colinux Tap"
conet-daemon: opening TAP: "Colinux Tap"
conet-daemon: driver version 7.1
conet-daemon: enabling TAP...
pipe client 0/8: Connecting to daemon...
pipe client 0/8: Connection established
Pipe broken, exiting
SetConsoleWindowInfo() error code 6
Console: Coopeartive Linux console started

pipe client 0/6: Connecting to daemon...
pipe client 0/6: Connection established
Console: Monitor0: Attached

Console: Monitor0: Broken pipe

Console: Monitor0: Detached

erminated, reason 1
switch_message: freed message be0118 (2 to 4)
daemon: module disconnected: conet0
switch_message: freed message be0118 (2 to 4)
daemon: module disconnected: console
colinux: shutting down
daemon: daemon cleanup

any one met the same problem?

jim

=====



		
__________________________________
Do you Yahoo!?
Vote for the stars of Yahoo!'s next ad campaign!
http://advision.webevents.yahoo.com/yahoo/votelifeengine/