[coLinux-devel] [ colinux-Bugs-2890868 ] coLinux error in SCSI-driver with DVD-image?

[SourceForge.net <no...@so...>]

Bugs item #2890868, was opened at 2009-11-02 20:44
Message generated for change (Settings changed) made by peter_kuznetsov
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2890868&group_id=98788

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: Crash / BSOD
Group: None
>Status: Deleted
Resolution: None
Priority: 5
Private: No
Submitted By: Peter Kuznetsov (peter_kuznetsov)
Assigned to: Nobody/Anonymous (nobody)
Summary: coLinux error in SCSI-driver with DVD-image?

Initial Comment:

Summary.
=======
Version 0.8.0 with kernel 2.6.25.20: 
  ...
  Driver 'sd' needs updating - please use bus_type methods
  Driver 'sr' needs updating - please use bus_type methods
  ...
  scsi1: unhandled opcode: 51
  ...
  Kernel panic - not syncing: COSCSI: response: use_sg (2) > 1!

Version 0.8.0 with kernel 2.6.22.18:
Version 0.7.5:
Version 0.7.4:
  ...
  scsi1: unhandled opcode: 5a
  scsi1: unhandled opcode: 51
  ...
  (System continue working)

Version 0.7.3:
Version 0.7.2:
  Don't work.

Some details.
============
  File "run.bat":
  --------------
    set COLINUX_CONSOLE_FONT=Lucida Console:12
    set COLINUX_CONSOLE_EXIT_ON_DETACH=1

    colinux-daemon.exe --remove-driver
    colinux-daemon.exe --install-driver

    colinux-daemon.exe @config.cfg -v 3 -t nt

    colinux-daemon.exe --remove-driver

  File "config.cfg":
  ----------------
    cocon=160x79

    mem=512

    kernel=vmlinux
    initrd=initrd.gz

    # Flat part of vmdk (with MBR)
    scsi0=disk,"Debian-5.0.3-KDE-00.flat"  
    scsi1=disk,"O:\VIRT_DISK\VDISKS\swap_scsi_0.flat"  # flat part of vmdk
    scsi2=cdrom,"J:\OS\Linux\$DEBIAN\Debian\5.0.3\debian-503-i386-DVD-1.iso"

    root=/dev/sda1
    ro

    eth0=slirp

  File "/etc/fstab" (without editing after installation):
  ----------------
    # /etc/fstab: static file system information.
    #
    # <file system> <mount point>   <type>  <options>       <dump>  <pass>
    proc            /proc           proc    defaults        0       0
    /dev/sda1       /               ext3    errors=remount-ro 0       1
    /dev/sdb1       none            swap    sw              0       0
    /dev/scd0       /media/cdrom0   udf,iso9660 user,noauto     0       0
    /dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0

  In whole system after installation I've edited only one file "/etc/X11/default-display-manager":
    #/usr/bin/kdm
    echo "null" > /etc/X11/default-display-manager 

Relevant output.
===============
  Version 0.8.0 with kernel 2.6.25.20 (kernel panic): 
  --------------------------------------------------
    scsi0 : Cooperative Linux SCSI Adapter
    scsi 0:0:0:0: Direct-Access     coLinux  CODISK           1.01 PQ: 0 ANSI: 5
    scsi 0:0:1:0: Direct-Access     coLinux  CODISK           1.01 PQ: 0 ANSI: 5
    scsi 0:0:2:0: CD-ROM            coLinux  COCD             1.01 PQ: 0 ANSI: 2
    Driver 'sd' needs updating - please use bus_type methods   <----------------------PK!!!
    sd 0:0:0:0: [sda] 6291456 512-byte hardware sectors (3221 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 1f 00 10 08
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
    sd 0:0:0:0: [sda] 6291456 512-byte hardware sectors (3221 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 1f 00 10 08
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
     sda: sda1
    sd 0:0:0:0: [sda] Attached SCSI disk
    sd 0:0:1:0: [sdb] 4194304 512-byte hardware sectors (2147 MB)
    sd 0:0:1:0: [sdb] Write Protect is off
    sd 0:0:1:0: [sdb] Mode Sense: 1f 00 10 08
    sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
    sd 0:0:1:0: [sdb] 4194304 512-byte hardware sectors (2147 MB)
    sd 0:0:1:0: [sdb] Write Protect is off
    sd 0:0:1:0: [sdb] Mode Sense: 1f 00 10 08
    sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
     sdb: sdb1
    sd 0:0:1:0: [sdb] Attached SCSI disk
    Driver 'sr' needs updating - please use bus_type methods   <----------------------PK!!!
    sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:2:0: Attached scsi CD-ROM sr0
    ...
    scsi2: unhandled opcode: 51
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 0:0:1:0: Attached scsi generic sg1 type 0
    sr 0:0:2:0: Attached scsi generic sg2 type 5
    scsi2: unhandled opcode: 51
    ...
    Kernel panic - not syncing: COSCSI: response: use_sg (2) > 1! <-------------------PK!!!

    colinux: Linux VM terminated
    colinux: Kernel panic: COSCSI: response: use_sg (2) > 1!

    console: Monitor3116: Detached

    Q:\coLinux\$Debian\Debian\5.0.3-co-080_2.6.25.20>colinux-daemon.exe --remove-driver
    Cooperative Linux Daemon, 0.8.0
    Daemon compiled on Sun Sep 27 12:50:20 2009

    ============================================================================

  Version 0.8.0 with kernel 2.6.22.18 (working):
  ---------------------------------------------
    scsi0 : Cooperative Linux SCSI Adapter
    scsi 0:0:0:0: Direct-Access     coLinux  CODISK           1.01 PQ: 0 ANSI: 5
    scsi 0:0:1:0: Direct-Access     coLinux  CODISK           1.01 PQ: 0 ANSI: 5
    scsi 0:0:2:0: CD-ROM            coLinux  COCD             1.01 PQ: 0 ANSI: 2
    sd 0:0:0:0: [sda] 6291456 512-byte hardware sectors (3221 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 1f 00 10 08
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
    sd 0:0:0:0: [sda] 6291456 512-byte hardware sectors (3221 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 1f 00 10 08
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
     sda: sda1
    sd 0:0:0:0: [sda] Attached SCSI disk
    sd 0:0:1:0: [sdb] 4194304 512-byte hardware sectors (2147 MB)
    sd 0:0:1:0: [sdb] Write Protect is off
    sd 0:0:1:0: [sdb] Mode Sense: 1f 00 10 08
    sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
    sd 0:0:1:0: [sdb] 4194304 512-byte hardware sectors (2147 MB)
    sd 0:0:1:0: [sdb] Write Protect is off
    sd 0:0:1:0: [sdb] Mode Sense: 1f 00 10 08
    sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
     sdb: sdb1
    sd 0:0:1:0: [sdb] Attached SCSI disk
    sr0: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:2:0: Attached scsi CD-ROM sr0
    .......................................
    scsi2: unhandled opcode: 51                                   <-------------------PK!!!
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 0:0:1:0: Attached scsi generic sg1 type 0
    sr 0:0:2:0: Attached scsi generic sg2 type 5
    .......................................
    scsi2: unhandled opcode: 5a                                   <-------------------PK!!!
    scsi2: unhandled opcode: 51
    scsi2: unhandled opcode: 51
    scsi2: unhandled opcode: 5a
    scsi2: unhandled opcode: 5a
    ...
    sd 0:0:1:0: [sdb] Synchronizing SCSI cache
    sd 0:0:0:0: [sda] Synchronizing SCSI cache

    ===============================================================================

    If you need some additional testing of coLinux-0.8.0 with kernel 2.6.25.20, mail me, I can do it. 
    Many thanks for very usefull system!!!

    With best regards, Peter.


----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2890868&group_id=98788