Re: [coLinux-users] Host OS doesn't respond to coLinux OS

[H. N. <hen...@ar...>]

Josep Maria Antolín Segura wrote:
> 
> While you say you've disabled the firewall.. did you do so on the Windows'
> one?
> 
> Other than that, your configuration seems file, more so if you can
> establish
> connection with colinux.
> You could also try not putting a name on the tuntap adapter (i.e., remove
> "TAP"). If you only have one, the name is optional. It is necessary when
> there
> are more than one (case of multiple colinux running simultaneously). If
> this fixes it, then the name indicated is incorrect.
> 
> 
> At last, your X notions are correct. your DISPLAY var would be
> DISPLAY=192.168.2.1:0.0 , and then you have to configure xming to not use
> access control. (allows connections from any ip).

Disabling "access control" you does by adding "-ac" to the command line for Xming.

Additional I would ask you to check, that you don't have non other adapters in the network 192.168.2.xxx

As I see, that you also have eth0 with the pcap-bridge, you can also use the ip adress from your real Ethernet adapter, and put it's ip address into the DISPLAY variable.

As you say, ssh into coLinux does work, than do follow steps:
Login with SSH
Check the ip of host with command "set | grep SSH_CLIENT"
Use this ip address from above in the DISPLAY
Call for example "DISPLAY=192.168.2.1:0.0 xterm"


-- 
Henry

---------------------------------------------------------
... Es folgt Arcor Werbung | Ads follows by Arcor ...


Comedy-Battle! Jetzt ablachen und voten! Neue Comedians, Spontanhumoristen und Nachwuchs-Spaßmacher machen gute Laune - bestimmen Sie den Wochensieger!
http://comedy-battle.arcor.de/