Menu
▾
▴
[coLinux-devel] [ colinux-Bugs-2548486 ] no networking when running devel-20090121 as NT service
|
From: SourceForge.net <no...@so...> - 2009-01-31 04:54:05
|
Bugs item #2548486, was opened at 2009-01-30 09:28 Message generated for change (Comment added) made by aryairani You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2548486&group_id=98788 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: None Group: v0.8.x (devel) Status: Open Resolution: None Priority: 5 Private: No Submitted By: Arya (aryairani) Assigned to: Nobody/Anonymous (nobody) Summary: no networking when running devel-20090121 as NT service Initial Comment: Works fine when running from commandline: > colinux-daemon @config.conf but > colinux-daemon --install-service coLinux @config.conf > net start colinux results in linux booting without eth. Can you reproduce? Thanks, Arya P.S. Also it hung as I was switching back and forth between console and service instances C:\coLinux\devel-20090121>net stop colinux The coLinux service is stopping........ The coLinux service could not be stopped. But that was the first time it hanged. But it was also the first time I was switching back and forth much, to collect log info. ---------------------------------------------------------------------- >Comment By: Arya (aryairani) Date: 2009-01-31 04:53 Message: Thanks henryn, I used option A with great success. ---------------------------------------------------------------------- Comment By: Henry N. (henryn) Date: 2009-01-31 01:16 Message: Hello Arya, this is a problem of "udev" and different user accounts from start as service vs. command line start. coLinux stores the random created MACs inside the per User registry. So, you will have different MACs between the different starts. Ones use the Windows System account and the other the local User account. You will have different MAC for the network adapters between the different boot types. In the not working "run as service" you would see the networks as eth2 and eth3, I'm afraid. You can check this with this command on Linux: cat /proc/net/dev More about this "udev" problem can read here: https://sourceforge.net/tracker/index.php?func=detail&aid=1861876&group_id=98788&atid=622063 To fix this, you have two options: A) Copy the working random MACs to the config to have the same all times. 1. Run command line version 2. copy the MAC you will find with "ifconfig" for eth0 and eth1 3. paste these MACs to your config.conf after the eth0 and eth1, for example: eth0=slirp,00:ff:xx:xx:xx:xx eth1=tuntap,,00:ff:xx:xx:xx:xx Fill out the xx with your digits. Remember to set two commas on eth1 to skip the TAP-Name. 4. Shutdown coLinux and run it as service B) Setup a self made MAC for both adapters 1. Run coLinux 2. Remove all lines from /etc/udev/rules.d/z25_persistent-net.rules inside your Ubuntu. 3. Please add unique MAC number for each network in config.conf, for example eth0=slirp,02:00:00:00:00:01 eth1=tuntap,,02:00:00:00:00:02 Remember to set two commas on eth1 to skip the TAP-Name. A simple rule for self creating such MAC numbers: It should start with 02, and than follow ten random hex digits. The number you will use, should not exist in your network area near you. 4. Shutdown coLinux and start it again (don't use "reboot") With next starts it should have networks in both starting variants all times. For the "service could not be stopped" have no idea. Please open a new bug report, if you have more details. ---------------------------------------------------------------------- Comment By: Arya (aryairani) Date: 2009-01-30 23:59 Message: Sorry about that. XP Pro SP2 kernel=vmlinux cobd0="c:\coLinux\Ubuntu-7.10.ext3.2GB\Ubuntu-7.10.ext3.2gb.fs" cobd1="c:\coLinux\Ubuntu-7.10.ext3.2GB\swap128.fs" cobd2="\Device\Cdrom0" cobd3="\Device\Harddisk0\Partition4" cobd4="\Device\Harddisk0\Partition2" cofs0=c:\ cofs1=d:\ root=/dev/cobd0 ro eth0=slirp eth1=tuntap Again, networking works fine when I launch from commandline, no networking when I launch as service. I haven't checked whether cofs works or not when launching as a service... ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2009-01-30 09:49 Message: Please upload or paste your config.conf here. What is your host system? Windows XP with SP..., or Windows 2000? ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=622063&aid=2548486&group_id=98788 |
