[coLinux-devel] status-driver: No error level anymore?

[<Use...@zo...>]

Hello

.\colinux-daemon.exe -v 3 --status-driver
do not deliver an errorlevel anymore, 
if the loaded driver is not working.

The batch sequence shown below worked flawlessly for some time:
If the driver was wrong, the batch unloads the old and
installs the current.
But now error level is always 0, 
but conlinux now dies with:

C:\coLinux>.\colinux-daemon.exe   -t NT @colinux.conf -v 3
Cooperative Linux Daemon, 0.8.0
Daemon compiled on Fri Mar 14 05:26:03 2008

using 'vmlinux' as kernel image
configuring 128 MB of virtual RAM
mapping cobd0 to \??\C:\colinux..
mapping cobd1 to \??\C:\colinux...
mapping cobd4 to \Device\Cdrom0
mapping hda to cobd0
mapping hdb to cobd1
mapping hdc to cobd4
configured PCAP bridge at 'LAN-ADM851X' device as eth0
MAC address: 0A:C0:71:65:08:00
mapping cofs0 to \??\C:\colinux....
using 'initrd.gz' as initrd image
mapping cofs31 to \??\C:\coLinux
mapping ttys0 to COM2
kernel boot parameters: 'root=/dev/cobd0'
error initializing
daemon: exit code 83278801
daemon: error - CO_RC_ERROR_ERROR, line 482, file src/colinux/user/daemon.c (25)

snip-------------------->

set COLINUXEXE=.\colinux-daemon.exe
:testdriver
echo on
%COLINUXEXE% --status-driver
if %ERRORLEVEL% == 0 goto noproblem
 installnewdriver:
 echo ERROR: Wrong driver!
 net stop colinux
 %COLINUXEXE% --remove-service
 %COLINUXEXE% --remove-service colinux
 %COLINUXEXE% --remove-driver
 %COLINUXEXE% --install-driver
 %COLINUXEXE% --status-driver
 if %ERRORLEVEL% == 0 goto noproblem
 pause
goto testdriver

:noproblem

<-------------------snap


Maybe 3 states, binary combinable?

a)  0 All is well 
    1 ?
    2 ?
    4 ?
    8 ?
b) 16 Old driver
c) 32 Wrong linux API
d) 64 Wrong periphery API
e) 128 ?





C:\coLinux>.\colinux-daemon.exe -v 3 --status-driver
Cooperative Linux Daemon, 0.8.0
Daemon compiled on Fri Mar 14 05:26:03 2008

checking if the driver is installed
current state: 4 (fully initialized)
current number of monitors: 0
current linux api version: 11
current periphery api version: 21
Driver compiled on: Sun Feb 24 18:39:07 2008

C:\coLinux>echo %ERRORLEVEL%
0

C:\coLinux>net stop colinux
Systemfehler 1060 aufgetreten.

Der angegebene Dienst ist kein installierter Dienst.


C:\coLinux>.\colinux-daemon.exe --remove-service
Cooperative Linux Daemon, 0.8.0
Daemon compiled on Fri Mar 14 05:26:03 2008

daemon: removing service 'Cooperative Linux'
daemon: failed to remove service. OpenService failed: Der angegebene Dienst
ist
kein installierter Dienst.

C:\coLinux>.\colinux-daemon.exe --remove-service colinux
Cooperative Linux Daemon, 0.8.0
Daemon compiled on Fri Mar 14 05:26:03 2008

daemon: removing service 'colinux'
daemon: failed to remove service. OpenService failed: Der angegebene Dienst
ist
kein installierter Dienst.

C:\coLinux>.\colinux-daemon.exe --remove-driver
Cooperative Linux Daemon, 0.8.0
Daemon compiled on Fri Mar 14 05:26:03 2008


C:\coLinux>.\colinux-daemon.exe --install-driver
Cooperative Linux Daemon, 0.8.0
Daemon compiled on Fri Mar 14 05:26:03 2008

loading C:\coLinux\linux.sys
daemon: driver installed

C:\coLinux>.\colinux-daemon.exe --status-driver
Cooperative Linux Daemon, 0.8.0
Daemon compiled on Fri Mar 14 05:26:03 2008

checking if the driver is installed
current state: 4 (fully initialized)
current number of monitors: 0
current linux api version: 11
current periphery api version: 21
Driver compiled on: Fri Mar 14 05:26:03 2008


Now it runs!

Rainer