From: Oscar U. <osc...@pr...> - 2007-09-07 18:03:05
|
Folks, I am attempting to install 0.6.4-linux-2.6.11 with Debian Etch[*1] accordin= g to the wiki instructions[*2] on WinXp Pro[*3]. I used fltk console invoke= d from cmd.exe after starting the colinux service. I was able to get most o= f the way with "Install the base system", then selected linux-image-2.6-686= at 79% complete. A little later I am prompted for "Configuring popularity-= contest" install option which said, "The system may anonymously supply the = distribution developers with statistics about the most used packages on thi= s system...." I switched to virtual console 1, and issued the mknod command= s to create /target/dev/cobd[0123] block device nodes, and modified /target= /etc/fstab. In virtual screen 4, I observed the final lines as follows. The= n responding either "Yes" or "No" results in the colinux-daemon crashing wi= thout completing the base system install (additional backtrace included bel= ow in dpkg.log), at this point the fltk windows console process would detac= h.=20 I can boot via the image it does create, but the image represents an incomp= lete install, e.g. some /etc/init.d/ scripts will not run (/etc/init.d/ssh = start =3D> 'Warning: Fake start-stop-daemon called, doing nothing'), user a= ccounts are not created (root password not set). The default.colinux.xml I = used for the daemon is included below. I can ssh into the installed image. = Any ideas how to correct or complete a good install? Thanks, OSC in-target: Building dependency tree... in-target:=20 in-target: Suggested packages: in-target: anacron in-target: Recommended packages: in-target: exim4 mail-transport-agent mime-construct in-target: The following NEW packages will be installed: in-target: popularity-contest .... <?xml version=3D"1.0" encoding=3D"UTF-8"?> <colinux> <block_device index=3D"0" path=3D"\DosDevices\c:\coLinux\root.fs" enabl= ed=3D"true" /> <block_device index=3D"1" path=3D"\DosDevices\c:\coLinux\swap_device" e= nabled=3D"true" /> <block_device index=3D"2" path=3D"\DosDevices\c:\coLinux\debian-40r1-i3= 86-businesscard.iso" enabled=3D"true" /> <block_device index=3D"3" path=3D"\DosDevices\c:\coLinux\debian-40r1-in= itrd" enabled=3D"true" /> <bootparams>root=3D/dev/cobd2</bootparams> <initrd path=3D"debian-40r1-initrd.gz" /> <image path=3D"vmlinux" /> <memory size=3D"512" /> <network index=3D"0" type=3D"tap"/> <network index=3D"1" name=3D"Local Area Connection" type=3D"bridged" /> </colinux> [*1] http://cdimage.debian.org/debian-cd/4.0_r1/i386/iso-cd/ debian-40r1-i3= 86-businesscard.iso [*2] http://colinux.wikia.com/wiki/InstallDebianFromIsoShort [*3] WinXp Pro Version 5.1 (Build 2600.xpsp_sp2_qfe.070227-2300 : Service P= ack 2) Additional log info : debian:/var/log# cat dmesg Linux version 2.6.11-co-0.6.4 (george@CoDebianDevel) (gcc version 3.4.4 200= 50314 (prerelease) (Debian 3.4.3-13)) #1 Mon Jun 19 05:36:13 UTC 2006 512MB LOWMEM available. initrd enabled: start: 0xdfe07000 size: 0x001f812b) On node 0 totalpages: 131072 DMA zone: 0 pages, LIFO batch:1 Normal zone: 131072 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: root=3D/dev/cobd0 Initializing CPU#0 Setting proxy interrupt vectors PID hash table entries: 4096 (order: 12, 65536 bytes) Using cooperative for high-res timesource Console: colour CoCON 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 513536k/524288k available (1537k kernel code, 0k reserved, 521k dat= a, 108k init, 0k highmem) Calibrating delay loop... 548.86 BogoMIPS (lpj=3D2744320) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000= e3bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e= 3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: bfebfbff 20100000 00000000 00000040 0000e3bd 00= 000000 00000001 CPU: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an in= itrd Freeing initrd memory: 2016k freed NET: Registered protocol family 16 devfs: 2004-01-31 Richard Gooch (rg...@at...) devfs: boot_options: 0x0 cofuse init 0.1 (API version 2.2) Initializing Cryptographic API serio: cokbd at irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize cobd: loaded (max 32 devices) loop: loaded (max 8 devices) conet: loaded (max 16 devices) conet0: initialized conet1: initialized mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on cokbd NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 RAMDISK: Compressed image found at block 0 EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). ReiserFS: cobd0: warning: sh-2021: reiserfs_fill_super: can not find reiser= fs on cobd0 kjournald starting. Commit interval 5 seconds EXT3 FS on cobd0, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. EXT3 FS on cobd0, internal journal EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem). Trying to move old root to /initrd ... okay Freeing unused kernel memory: 108k freed kjournald starting. Commit interval 5 seconds Adding 524280k swap on /dev/cobd1. Priority:-1 extents:1 EXT3 FS on cobd0, internal journal debian:/var/log# tail -n 100 dpkg.log=20 2007-09-07 13:21:02 status unpacked initramfs-tools 0.85h 2007-09-07 13:21:02 status unpacked initramfs-tools 0.85h 2007-09-07 13:21:02 status half-configured initramfs-tools 0.85h 2007-09-07 13:21:02 status installed initramfs-tools 0.85h 2007-09-07 13:22:48 install linux-image-2.6.18-5-686 <none> 2.6.18.dfsg.1-13 2007-09-07 13:22:48 status half-installed linux-image-2.6.18-5-686 2.6.18.d= fsg.1-13 2007-09-07 13:22:52 status unpacked linux-image-2.6.18-5-686 2.6.18.dfsg.1-= 13 2007-09-07 13:22:52 status unpacked linux-image-2.6.18-5-686 2.6.18.dfsg.1-= 13 2007-09-07 13:22:52 install linux-image-2.6-686 <none> 2.6.18+6etch1 2007-09-07 13:22:52 status half-installed linux-image-2.6-686 2.6.18+6etch1 2007-09-07 13:22:52 status unpacked linux-image-2.6-686 2.6.18+6etch1 2007-09-07 13:22:52 status unpacked linux-image-2.6-686 2.6.18+6etch1 2007-09-07 13:22:52 status unpacked linux-image-2.6.18-5-686 2.6.18.dfsg.1-= 13 2007-09-07 13:22:52 status half-configured linux-image-2.6.18-5-686 2.6.18.= dfsg.1-13 2007-09-07 13:23:05 status installed linux-image-2.6.18-5-686 2.6.18.dfsg.1= -13 2007-09-07 13:23:05 status unpacked linux-image-2.6-686 2.6.18+6etch1 2007-09-07 13:23:05 status half-configured linux-image-2.6-686 2.6.18+6etch1 2007-09-07 13:23:05 status installed linux-image-2.6-686 2.6.18+6etch1 2007-09-07 13:23:14 install libc6-i686 <none> 2.3.6.ds1-13etch2 2007-09-07 13:23:14 status half-installed libc6-i686 2.3.6.ds1-13etch2 2007-09-07 13:23:14 status unpacked libc6-i686 2.3.6.ds1-13etch2 2007-09-07 13:23:14 status unpacked libc6-i686 2.3.6.ds1-13etch2 2007-09-07 13:23:14 status unpacked libc6-i686 2.3.6.ds1-13etch2 2007-09-07 13:23:14 status half-configured libc6-i686 2.3.6.ds1-13etch2 2007-09-07 13:23:14 status installed libc6-i686 2.3.6.ds1-13etch2 2007-09-07 13:23:16 install eject <none> 2.1.4-3 2007-09-07 13:23:16 status half-installed eject 2.1.4-3 2007-09-07 13:23:16 status unpacked eject 2.1.4-3 2007-09-07 13:23:16 status unpacked eject 2.1.4-3 2007-09-07 13:23:16 status unpacked eject 2.1.4-3 2007-09-07 13:23:16 status half-configured eject 2.1.4-3 2007-09-07 13:23:16 status installed eject 2.1.4-3 2007-09-07 13:41:08 install popularity-contest <none> 1.41 2007-09-07 13:41:08 status half-installed popularity-contest 1.41 2007-09-07 13:41:08 status unpacked popularity-contest 1.41 2007-09-07 13:41:08 status unpacked popularity-contest 1.41 2007-09-07 13:41:08 status unpacked popularity-contest 1.41 2007-09-07 13:41:08 status unpacked popularity-contest 1.41 2007-09-07 13:41:08 status half-configured popularity-contest 1.41 2007-09-07 13:41:08 status installed popularity-contest 1.41 2007-09-07 13:41:09 status installed popularity-contest 1.41 2007-09-07 13:41:09 remove popularity-contest 1.41 1.41 2007-09-07 13:41:09 status half-configured popularity-contest 1.41 2007-09-07 13:41:09 status half-installed popularity-contest 1.41 2007-09-07 13:41:09 status config-files popularity-contest 1.41 2007-09-07 13:41:09 purge popularity-contest 1.41 1.41 2007-09-07 13:41:09 status config-files popularity-contest 1.41 2007-09-07 13:41:09 status config-files popularity-contest 1.41 2007-09-07 13:41:09 status config-files popularity-contest 1.41 2007-09-07 13:41:09 status config-files popularity-contest 1.41 2007-09-07 13:41:09 status config-files popularity-contest 1.41 2007-09-07 13:41:09 status not-installed popularity-contest <none> 2007-09-07 13:50:08 install libkrb53 <none> 1.4.4-7etch4 2007-09-07 13:50:08 status half-installed libkrb53 1.4.4-7etch4 2007-09-07 13:50:08 status unpacked libkrb53 1.4.4-7etch4 2007-09-07 13:50:08 status unpacked libkrb53 1.4.4-7etch4 2007-09-07 13:50:08 install libedit2 <none> 2.9.cvs.20050518-2.2 2007-09-07 13:50:08 status half-installed libedit2 2.9.cvs.20050518-2.2 2007-09-07 13:50:08 status unpacked libedit2 2.9.cvs.20050518-2.2 2007-09-07 13:50:08 status unpacked libedit2 2.9.cvs.20050518-2.2 ---->> install/colinux daemon crashed here.... Booting into system allowed = me to install additional packages afterwards. 2007-09-07 13:50:08 install openssh-client <none> 1:4.3p2-9 2007-09-07 13:50:08 status half-installed openssh-client 1:4.3p2-9 2007-09-07 13:50:08 status unpacked openssh-client 1:4.3p2-9 2007-09-07 13:50:08 status unpacked openssh-client 1:4.3p2-9 2007-09-07 13:50:08 install openssh-server <none> 1:4.3p2-9 2007-09-07 13:50:08 status half-installed openssh-server 1:4.3p2-9 2007-09-07 13:50:09 status unpacked openssh-server 1:4.3p2-9 2007-09-07 13:50:09 status unpacked openssh-server 1:4.3p2-9 2007-09-07 13:50:09 status unpacked libkrb53 1.4.4-7etch4 2007-09-07 13:50:09 status half-configured libkrb53 1.4.4-7etch4 2007-09-07 13:50:09 status installed libkrb53 1.4.4-7etch4 2007-09-07 13:50:09 status unpacked libedit2 2.9.cvs.20050518-2.2 2007-09-07 13:50:09 status half-configured libedit2 2.9.cvs.20050518-2.2 2007-09-07 13:50:09 status installed libedit2 2.9.cvs.20050518-2.2 2007-09-07 13:50:09 status unpacked openssh-client 1:4.3p2-9 2007-09-07 13:50:09 status unpacked openssh-client 1:4.3p2-9 2007-09-07 13:50:09 status unpacked openssh-client 1:4.3p2-9 2007-09-07 13:50:09 status half-configured openssh-client 1:4.3p2-9 2007-09-07 13:50:11 status installed openssh-client 1:4.3p2-9 2007-09-07 13:50:11 status unpacked openssh-server 1:4.3p2-9 2007-09-07 13:50:11 status unpacked openssh-server 1:4.3p2-9 2007-09-07 13:50:11 status unpacked openssh-server 1:4.3p2-9 2007-09-07 13:50:11 status unpacked openssh-server 1:4.3p2-9 2007-09-07 13:50:11 status half-configured openssh-server 1:4.3p2-9 2007-09-07 13:50:14 status installed openssh-server 1:4.3p2-9 2007-09-07 13:57:53 install libmagic1 <none> 4.17-5etch2 2007-09-07 13:57:53 status half-installed libmagic1 4.17-5etch2 2007-09-07 13:57:54 status unpacked libmagic1 4.17-5etch2 2007-09-07 13:57:54 status unpacked libmagic1 4.17-5etch2 2007-09-07 13:57:54 install file <none> 4.17-5etch2 2007-09-07 13:57:54 status half-installed file 4.17-5etch2 2007-09-07 13:57:54 status unpacked file 4.17-5etch2 2007-09-07 13:57:54 status unpacked file 4.17-5etch2 2007-09-07 13:57:54 status unpacked libmagic1 4.17-5etch2 2007-09-07 13:57:54 status half-configured libmagic1 4.17-5etch2 2007-09-07 13:57:54 status installed libmagic1 4.17-5etch2 2007-09-07 13:57:54 status unpacked file 4.17-5etch2 2007-09-07 13:57:54 status unpacked file 4.17-5etch2 2007-09-07 13:57:54 status half-configured file 4.17-5etch2 2007-09-07 13:57:54 status installed file 4.17-5etch2 debian:/var/log#=20 --=20 We've Got Your Name @ www.mail.com!!! Get a FREE E-mail Account Today - Choose From 100+ Domains |