colinux-users

[coLinux-users] DamnSmallLinux on colinux

[insomniux <dis...@bo...>]

Hi,
I'm trying to setup DSL on colinux has someone done that before? I'd
like to share experiences.

I've tried to follow the howto on installation of new distro;s, but I
run into errors (see below).

My configuration is:
WinXP SP2
Colinx 0.7.2
dsl-4.2.5-initrd.iso

I've copied the minirt24.gz from the iso file


=====Colinux-Daemon-command=========
C:\progra~1\colinux\colinux-daemon @dsl01.conf cofs0=d:\mike\colinux\dsl
root=/dev/ram0 -t nt 

=====dsl01-setup.conf===============
kernel=c:\PROGRA~1\coLinux\vmlinux
cobd0="D:\Mike\colinux\dsl\dsl-4.2.5-initrd.iso"
hda1="D:\Mike\colinux\dsl\dsl.fs"
hda2="D:\Mike\colinux\dsl\swap_512Mb"
root=/dev/hda1
ro
initrd="D:\Mike\colinux\dsl\minirt24.gz"
mem=256
eth0=pcap-bridge,"Colinux-TAP-host" 
eth1=tuntap,"Colinux-TAP-guest"

=====Windows-console-output=========
D:\Mike\colinux\dsl>C:\progra~1\colinux\colinux-daemon @dsl01.conf
cofs0=d:\mik
\colinux\dsl root=/dev/ram0 -t nt #ramdisk_size=40000
Cooperative Linux Daemon, 0.7.2
Compiled on Jan 18 2008 21:47:09

PID: 888
colinux: booting
Linux version 2.6.22-co-0.7.2 (hn@hn-lt) (gcc version 4.1.2) #1 PREEMPT
Fri Jan
18 21:44:04 UTC 2008
256MB LOWMEM available.
initrd enabled: start: 0xccf35000  size: 0x030ca520
Entering add_active_range(0, 0, 65536) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->        0
  Normal          0 ->    65536
early_node_map[1] active PFN ranges
    0:        0 ->    65536
On node 0 totalpages: 65536
  DMA zone: 0 pages used for memmap
  Normal zone: 512 pages used for memmap
  Normal zone: 65024 pages, LIFO batch:15
Built 1 zonelists.  Total pages: 65024
Kernel command line: root=/dev/hda1 ro root=/dev/ram0
#ramdisk_size=40000
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Setting proxy interrupt vectors
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour CoCON 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 205952k/262144k available (1628k kernel code, 0k reserved, 591k
data, 1
8k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffffc000 - 0xfffff000   (  12 kB)
    vmalloc : 0xd0800000 - 0xffffa000   ( 759 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
      .init : 0xc032e000 - 0xc034e000   ( 128 kB)
      .data : 0xc02971f8 - 0xc032afe4   ( 591 kB)
      .text : 0xc0100000 - 0xc02971f8   (1628 kB)
Calibrating delay loop... console: Coopeartive Linux console started
colinux-net-daemon: searching TAP device named "Colinux-TAP-guest"
colinux-net-daemon: found TAP device named "Colinux-TAP-host"
colinux-net-daemon: found TAP device named "Colinux-TAP-guest"
colinux-net-daemon: opening TAP: "Colinux-TAP-guest"
colinux-net-daemon: TAP driver version 8.4
colinux-net-daemon: enabling TAP...
conet-bridged-daemon: Looking for interface "Colinux-TAP-host"
conet-bridged-daemon: adapter Adapter for generic dialup and VPN capture
doesn'
 have a connection
conet-bridged-daemon: checking connection: Colinux-TAP-guest
conet-bridged-daemon: checking connection: Real
conet-bridged-daemon: checking connection: Netwerkbrug (Netwerkbrug) 9
conet-bridged-daemon: checking connection: Colinux-TAP-host
conet-bridged-daemon: listening on: TAP-Win32 Adapter V8 (coLinux)...
conet-bridged-daemon: listening for: (ether dst 00:ff:0e:b0:00:00) or
(ether br
adcast or multicast) or (ip broadcast or multicast)
1071.51 BogoMIPS (lpj=5357568)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
00004400
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: bfebf3ff 00000000 00000000 0000b080 00004400
000000
0 00000000
Compat vDSO mapped to ffffe000.
CPU: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 49961k freed
cofuse init 0.1 (API version 2.2)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
cobd: loaded (max 32 devices)
alias for cobd1 is hda1
cobd alias cobd1 -> hda1 created
alias for cobd2 is hda2
cobd alias cobd2 -> hda2 created
loop: module loaded
conet: loaded (max 16 devices)
conet0: initialized
conet1: initialized
serio: cokbd at irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
RAMDISK: Compressed image found at block 0
RAMDISK: incomplete write (-28 != 32768) 4194304
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 128k freed
attempt to access beyond end of device
ram0: rw=0, want=32776, limit=8192
EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block
- inode
3937, block=16387
Warning: unable to open an initial console.
attempt to access beyond end of device
ram0: rw=0, want=65544, limit=8192
EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block
- inode
7875, block=32771
attempt to access beyond end of device
ram0: rw=0, want=65544, limit=8192
EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block
- inode
7873, block=32771
attempt to access beyond end of device
ram0: rw=0, want=16396, limit=8192
EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block
- inode
1969, block=8197
Kernel panic - not syncing: No init found.  Try passing init= option to
kernel.
colinux: Linux VM terminated
colinux: terminated with code 3 - abnormal exit, aborting
console: Monitor888: Detached

D:\Mike\colinux\dsl>
=======================================

Thanks
Mike

Re: [coLinux-users] DamnSmallLinux on colinux

[Henry N. <Hen...@Ar...>]

insomniux wrote:
> I'm trying to setup DSL on colinux has someone done that before? I'd
> like to share experiences.
> 
> I've tried to follow the howto on installation of new distro;s, but I
> run into errors (see below).
> 
> My configuration is:
> WinXP SP2
> Colinx 0.7.2
> dsl-4.2.5-initrd.iso
> 
> I've copied the minirt24.gz from the iso file
> 
> 
> =====Colinux-Daemon-command=========
> C:\progra~1\colinux\colinux-daemon @dsl01.conf cofs0=d:\mike\colinux\dsl
> root=/dev/ram0 -t nt 
> 
> =====dsl01-setup.conf===============
> kernel=c:\PROGRA~1\coLinux\vmlinux
> cobd0="D:\Mike\colinux\dsl\dsl-4.2.5-initrd.iso"
> hda1="D:\Mike\colinux\dsl\dsl.fs"
> hda2="D:\Mike\colinux\dsl\swap_512Mb"
> root=/dev/hda1
> ro
> initrd="D:\Mike\colinux\dsl\minirt24.gz"
> mem=256
> eth0=pcap-bridge,"Colinux-TAP-host" 
> eth1=tuntap,"Colinux-TAP-guest"
> 
> =====Windows-console-output=========
> D:\Mike\colinux\dsl>C:\progra~1\colinux\colinux-daemon @dsl01.conf
> cofs0=d:\mik
> \colinux\dsl root=/dev/ram0 -t nt #ramdisk_size=40000
> Cooperative Linux Daemon, 0.7.2
> Compiled on Jan 18 2008 21:47:09
> 
> ...
> Kernel command line: root=/dev/hda1 ro root=/dev/ram0
> #ramdisk_size=40000

Typed wrong or you wand not use "ramdisk_size=..." ?

> ...
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

4096 blocks a 1024 was set from coLinux kernel config:
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024

> ...
> RAMDISK: Compressed image found at block 0
> RAMDISK: incomplete write (-28 != 32768) 4194304

The initial error: Write to ramdisk failed.

> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 128k freed
> attempt to access beyond end of device
> ram0: rw=0, want=32776, limit=8192

Your initrd size is to small. You have try to increase the ram disk
size? That should help.
What should do the '#' there?
"#ramdisk_size=40000" --> "ramdisk_size=40000"

Perhaps more ideas for you on Colonist?
I found in old user mail (2005-02-06)
http://sourceforge.net/mailarchive/message.php?msg_id=cu4pt5%24872%241%40sea.gmane.org

-- 
Henry N.