Menu
▾
▴
colinux-users
|
From: Dave C. <dc...@do...> - 2007-07-07 05:44:57
|
Hi, I'm using the Genntoo build on Windows XP. I had everything running perfectly with eth0=slirp and eth1=tuntp. /etc/conf.d/net had: config_eth0=( "dchp" ) config_eth1=( "192.168.37.20/24" ) I could ssh to the colinux layer via eth1 and use portage successfully on eth0. Now portage has stopped working and I cannot ping google or access www.yahoo.com with lynx. The Tuntap connection to the XP layer remains intact. I'm not sure what I might have done to disrupt the eth0 service. I have installed apache, but turning apache off does not help. Can anyone think of anything I can check? ifconfig tells me: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ eth0 Link encap:Ethernet HWaddr 00:FF:E8:32:BD:00 inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:25 errors:0 dropped:0 overruns:0 frame:0 TX packets:189 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1050 (1.0 Kb) TX bytes:14282 (13.9 Kb) Interrupt:2 eth1 Link encap:Ethernet HWaddr 00:FF:F9:56:80:00 inet addr:192.168.37.20 Bcast:192.168.37.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:372 errors:0 dropped:0 overruns:0 frame:0 TX packets:498 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:29783 (29.0 Kb) TX bytes:69384 (67.7 Kb) Interrupt:2 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ (I had my old laptop stolen in a burglary and I'm trying to set up the replacement) |
|
From: Sam M. <pa...@gm...> - 2007-07-08 04:47:58
|
This is rather silly but it has worked in the past. Delete all of your network devices, reboot and reinstall everything (namely the tap devices, the rest should autodetect) and see if this fixes things. I've seen it work once in the past with XP on this list and I've used it a few times under earlier operating systems (especially 98). This is only relevant if its been working and randomly seems to have stopped working which I think is your case, Sam On 07/07/07, Dave Coventry <dc...@do...> wrote: > Hi, > > I'm using the Genntoo build on Windows XP. > > I had everything running perfectly with eth0=slirp and eth1=tuntp. > > /etc/conf.d/net had: > config_eth0=( "dchp" ) > config_eth1=( "192.168.37.20/24" ) > > I could ssh to the colinux layer via eth1 and use portage successfully > on eth0. > > Now portage has stopped working and I cannot ping google or access > www.yahoo.com with lynx. The Tuntap connection to the XP layer remains > intact. > > I'm not sure what I might have done to disrupt the eth0 service. I have > installed apache, but turning apache off does not help. > > Can anyone think of anything I can check? > > ifconfig tells me: > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > eth0 Link encap:Ethernet HWaddr 00:FF:E8:32:BD:00 > inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:25 errors:0 dropped:0 overruns:0 frame:0 > TX packets:189 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:1050 (1.0 Kb) TX bytes:14282 (13.9 Kb) > Interrupt:2 > > eth1 Link encap:Ethernet HWaddr 00:FF:F9:56:80:00 > inet addr:192.168.37.20 Bcast:192.168.37.255 Mask:255.255.255.0 > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:372 errors:0 dropped:0 overruns:0 frame:0 > TX packets:498 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:29783 (29.0 Kb) TX bytes:69384 (67.7 Kb) > Interrupt:2 > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > (I had my old laptop stolen in a burglary and I'm trying to set up the > replacement) > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > coLinux-users mailing list > coL...@li... > https://lists.sourceforge.net/lists/listinfo/colinux-users > -- Sam Moffatt http://pasamio.id.au |
|
From: Dave C. <dc...@do...> - 2007-07-08 11:40:21
|
Robert Irvin wrote: > Have you set up /etc/resolv.conf to specify your nameservers? /etc/resolv.conf has: nameserver 10.0.2.3 Which is presumably handled by the Colinux slirp implementation..... Dave Coventry wrote: > Well that's me flummoxed! > > I started up using the original rootfile and it worked! > > Sorry to have wasted everyone's time on this.... > > Sam Moffatt wrote: >> Yes, thats something to do on the Windows side. Its strange but it has >> been a solution in the past for magically not working internet on >> other devices. Remember everything still goes through windows so if it >> has managed to corrupt itself (or just your tap interface) it might be >> enough to destroy your colinux connectivity. >> >> On the colinux side, if both your routes look sane and your ifconfig >> looks sane to me I would suggest that things should be working fine. >> You could change connectivity method but it looks like its working >> well. >> >> Debugging this stuff is always...fun :p >> >> Sam >> >> On 08/07/07, Dave Coventry <dc...@do...> wrote: >>> Hi Sam, thanks for the response. >>> >>> Do you mean on the Windows side? >>> >>> I've just built a clean gentoo-root file and the interenet connection >>> works fine, so it must be some change I've made to the colinux system. >>> >>> I might fiddle around with some of the files in /etc/conf.d/...... >>> >>> Can you suggest some configuration files to look at? >>> >>> Sam Moffatt wrote: >>> > This is rather silly but it has worked in the past. Delete all of >>> your >>> > network devices, reboot and reinstall everything (namely the tap >>> > devices, the rest should autodetect) and see if this fixes things. >>> > I've seen it work once in the past with XP on this list and I've used >>> > it a few times under earlier operating systems (especially 98). This >>> > is only relevant if its been working and randomly seems to have >>> > stopped working which I think is your case, >>> > >>> > Sam >>> > >>> > On 07/07/07, Dave Coventry <dc...@do...> wrote: >>> >> Hi, >>> >> >>> >> I'm using the Genntoo build on Windows XP. >>> >> >>> >> I had everything running perfectly with eth0=slirp and eth1=tuntp. >>> >> >>> >> /etc/conf.d/net had: >>> >> config_eth0=( "dchp" ) >>> >> config_eth1=( "192.168.37.20/24" ) >>> >> >>> >> I could ssh to the colinux layer via eth1 and use portage >>> successfully >>> >> on eth0. >>> >> >>> >> Now portage has stopped working and I cannot ping google or access >>> >> www.yahoo.com with lynx. The Tuntap connection to the XP layer >>> remains >>> >> intact. >>> >> >>> >> I'm not sure what I might have done to disrupt the eth0 service. >>> I have >>> >> installed apache, but turning apache off does not help. >>> >> >>> >> Can anyone think of anything I can check? >>> >> >>> >> ifconfig tells me: >>> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >>> >> >>> >> eth0 Link encap:Ethernet HWaddr 00:FF:E8:32:BD:00 >>> >> inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 >>> >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>> >> RX packets:25 errors:0 dropped:0 overruns:0 frame:0 >>> >> TX packets:189 errors:0 dropped:0 overruns:0 carrier:0 >>> >> collisions:0 txqueuelen:1000 >>> >> RX bytes:1050 (1.0 Kb) TX bytes:14282 (13.9 Kb) >>> >> Interrupt:2 >>> >> >>> >> eth1 Link encap:Ethernet HWaddr 00:FF:F9:56:80:00 >>> >> inet addr:192.168.37.20 Bcast:192.168.37.255 >>> >> Mask:255.255.255.0 >>> >> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>> >> RX packets:372 errors:0 dropped:0 overruns:0 frame:0 >>> >> TX packets:498 errors:0 dropped:0 overruns:0 carrier:0 >>> >> collisions:0 txqueuelen:1000 >>> >> RX bytes:29783 (29.0 Kb) TX bytes:69384 (67.7 Kb) >>> >> Interrupt:2 >>> >> >>> >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >>> >> >>> >> (I had my old laptop stolen in a burglary and I'm trying to set >>> up the >>> >> replacement) >>> >> >>> >> >>> ------------------------------------------------------------------------- >>> >>> >> >>> >> This SF.net email is sponsored by DB2 Express >>> >> Download DB2 Express C - the FREE version of DB2 express and take >>> >> control of your XML. No limits. Just data. Click to get it now. >>> >> http://sourceforge.net/powerbar/db2/ >>> >> _______________________________________________ >>> >> coLinux-users mailing list >>> >> coL...@li... >>> >> https://lists.sourceforge.net/lists/listinfo/colinux-users >>> >> >>> > >>> > >>> >>> >> >> > > |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X