colinux-users — coLinux users mailing list

Re: [coLinux-users] colinux & debian etch

[baldyeti <e_...@ho...>]

Thanks Henri. But Woody and 2.4.x kernels are definitely
even older than the sarge I want to replace! Etch comes with
a 2.6.18 kernel and uses udev - that was my primary concern.
So I if read you correctly, colinux 0.7.0 will come with a
2.6.12 kernel - what does colinux 0.8.x use? Can I expect
2.6.12 to play nicely with the debian 4 startup sequence,
and udev on the fly device creation (I barely know what I am
talking about). As I said i don't want to lose colinux's unique
ability to let me run the very same linux installation i can also
choose to boot natively. Ideally I'd free some disk space and
install etch to a new parttion, but it's so damn hard to figure
out the correct \Device\HarddiskX\PartitionY !
Also here there tentative release dates for the upcoming 0.7
and 0.8 versions?

[coLinux-users] Where is Debian Etch Root Image?

[Pooka <fyg...@yb...>]

Hello.
Recently, Debian's etch stable released but colinux's root
file system isn't found anywhere. Moreover kernel version
seems to be different from current coLinux's kernel
version too. I heard kernel can work with some patch.

 So Someone please make colinux's etch root FS and kernel,
and please post them to SourceForge. My skill doesn't
reach to that level.
My best regard.

Pooka

Re: [coLinux-users] CoLinux 0.6.4 problem

[Henry N. <Hen...@Ar...>]

Bill C. Riemers wrote:
> I was trying to use coLinux 0.6.4, but no matter what I try it won't 
> recognize the root file system.  It seems like the problem is either the 
> initrd.gz file, or the kernel.  I am not sure which.  For example I 
> downloaded the Debian image and renamed it root_fs so I could use the 

You should have unzip the image with bunzip2.exe
http://www.henrynestler.com/colinux/tools/bzip2-102-x86-win32.zip

The file Debian-3.0r2.ext3-mit-backports.1gb.bz2 is the latest debian 
and should have a size of exactly 1GB after unpacking.

For the first boot you can also boot without initrd.  Remove initrd from 
the xml config (or comment it out).

> default.colinux.xml file.  (That way I am certain I am not making a 
> typo.)  But this is what I get:
> 
> $ ./colinux-daemon.exe -c default.colinux.xml

Please start coLinux not from a CygWin.  Use a simple command prompt.
The image file, you have renamed to 'root_fs' should exist in the 
directory c:\coLinux\, if use the default.colinux.xml, check it with an 
simple 'dir c:\coLinux\root_fs' in the same command prompt, you later 
try to start coLinux with:
	cd c:\coLinux
	dir c:\coLinux\root_fs
	colinux-daemon.exe -c default.colinux.xml

> Cooperative Linux Daemon, 0.6.4
> Compiled on Mon May 29 22:19:09 2006
> 
> mapping cobd0 to \DosDevices\c:\coLinux\root_fs
> mapping cobd1 to \DosDevices\c:\coLinux\swap_device
> [...]
> VFS: Cannot open root device "cobd0" or unknown-block(117,0)
> Please append a correct "root=" boot option
> Kernel panic - not syncing: VFS: Unable to mount root fs on 
> unknown-block(117,0)

This is mostly an typofix in your filename of root_fs,
or you have not uncompressed it,
or the image file is demarged or incomplete.

If you use the windows explorer, be shure, that you see the file 
extension "*.bz2", it's default hidden.

-- 
Henry

Re: [coLinux-users] colinux & debian etch

[Henry N. <Hen...@Ar...>]

baldyeti wrote:
> Hello, I currently have colinux 0.6.3 setup to boot
> my HD-installation of debian sarge. What I really
> like and (as far as i can tell) only colinux can offer
> is the ability to run the very same linux i can start
> via dual-boot, not just an image. That's neat.
> Now sarge is aging, and i'd like to either upgrade or
> re-install the recently released etch version.
> I am wondering, though, if this has a chance to keep
> on working with the older kernel official colinux uses?
> Would a snapshot of 0.7.1 or even 0.8 be required to
> run an etch install (particularly wrt udev).

I'm not known about Debian versions and kernel depencies.
 From my installations I know coLinux 0.6.4, 0.7.1 and 0.8.x runs on a 
Debian Woody.

The coLinux limit is only, you should have the same binaries for 
Windows, the Linux kernel and the modules. Your system binaries (under 
/bin, /sbin and so) can be different.
Unpack the Modules vmlinux-modules.tar.gz from new colinux under 
/lib/modules/2.6.12-co-0.7.1, this is the only upgrade you need in your 
dual boot.

CoLinux versions 0.6.4, 0.7.1 and 0.8.0 runs also on my SuSE 9.0 dual 
boot with an original 2.4.21 kernel.  From my SuSE I know, that you can 
run every coLinux on an older distry.  For very old distries with kernel 
2.4.x you need to upgrade only the module-init-tools with fallback for 
2.4-kernels.

You can not run a new coLinux Windows (*.exe) with an older coLinux 
kernel from an other build.  Eatch coLinux release Version supports only 
exactly one kernel version.

-- 
Henry

Re: [coLinux-users] unable to install package

[Henry N. <Hen...@Ar...>]

Sam Moffatt wrote:
> There are a few issues here
> 1) Stable has updated twice since 3.0 (first Sarge [3.1] and now Etch
> [4.0]) so it is unlikely that the APT locations are still valid.
> 2) You're running out of allocated space for packages, this is a known
> fault when updating to Etch. See the release notes for a solution.
> 
> I would suggest using a more recent image. I would also suggest
> acquainting yourself with the target operating system in a full
> virtual machine (e.g. one of VMWare's products) or a fully fledged
> box.

I'm preffer an stable Debian, so the APT locations are longer valid.
It would be nice, if anybody send a new Debian Image to a free server.
I would check it and upload to SourceForge.

-- 
Henry

Re: [coLinux-users] NFS booting?

[Ph. M. <phi...@bm...>]

Hello Henry!

On Thursday 29 March 2007 14:50, Ph. Marek wrote:
> On Thursday 29 March 2007 00:18, Henry Nestler wrote:
> > exactly, was not.
> > CONFIG_ROOT_NFS also enabled now.
> >
> > Sorry, I'm not user of nfs boot.  My focus was on nfs in kernel only.
> > You wrote both in other mail, and I have not seen it. ;-(
> Thank you very much.
> It seems to work so far - my NFS server sadly says something about an
> unsupported protocol version, which I have to investigate further.
Now I chose the package nfs-user-server - and that works. I can use the root 
filesystem of another machine.

Currently I'm trying to get unionfs working ... but that's just a matter of 
time.


Thank you again!


Regards,

Phil

[coLinux-users] CoLinux 0.6.4 problem

[Bill C. R. <do...@fr...>]

Hi,

I was trying to use coLinux 0.6.4, but no matter what I try it won't
recognize the root file system.  It seems like the problem is either the
initrd.gz file, or the kernel.  I am not sure which.  For example I
downloaded the Debian image and renamed it root_fs so I could use the
default.colinux.xml file.  (That way I am certain I am not making a typo.)
But this is what I get:

$ ./colinux-daemon.exe -c default.colinux.xml
auto selecting TAP
TAP device not found
Cooperative Linux Daemon, 0.6.4
Compiled on Mon May 29 22:19:09 2006

mapping cobd0 to \DosDevices\c:\coLinux\root_fs
mapping cobd1 to \DosDevices\c:\coLinux\swap_device
Linux version 2.6.11-co-0.6.4 (george@CoDebianDevel) (gcc version
3.4.420050314 (prerelease) (Debian
3.4.3-13)) #1 Mon 64MB LOWMEM available.
initrd enabled: start: 0xc3e07000  size: 0x001f812b)
On node 0 totalpages: 16384
  DMA zone: 0 pages, LIFO batch:1
  Normal zone: 16384 pages, LIFO batch:4
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/cobd0
Initializing CPU#0
Setting proxy interrupt vectors
PID hash table entries: 512 (order: 9, 8192 bytes)
Using cooperative for high-res timesource
Console: colour CoCON 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 59264k/65536k available (1537k kernel code, 0k reserved, 521k data,
108k init, 0k highmem)
Calibrating delay loop... 1222.24 BogoMIPS (lpj=6111232)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000
00000000 00000000 00000000
CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000
00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 00000000
00000000 00000000
CPU: AMD Athlon(tm) 64 Processor 3200+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
checking if image is initramfs...it isn't (no cpio magic); looks like an
initrd
Freeing initrd memory: 2016k freed
NET: Registered protocol family 16
devfs: 2004-01-31 Richard Gooch (rg...@at...)
devfs: boot_options: 0x0
cofuse init 0.1 (API version 2.2)
Initializing Cryptographic API
serio: cokbd at irq 1
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
cobd: loaded (max 32 devices)
loop: loaded (max 8 devices)
conet: loaded (max 16 devices)
conet0: initialized
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on cokbd
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
EXT2-fs warning: checktime reached, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
VFS: Cannot open root device "cobd0" or unknown-block(117,0)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(117,0)

Re: [coLinux-users] Xrealvnc uses all my CPU

[Robert B. <ro...@ro...>]

James Hirschorn wrote:
> I recently setup my native linux operating system to run under coLinux. It was 
> amazing!
>
> Unfortunately, after a couple of hours colinux became so slow that it was 
> unusable. The Xrealvnc executable was using about 75% of the colinux CPU, and 
> the colinux-daemon about 80-90% of the Windows XP CPU. 
>
> I have no previous experience with the VNC server. My KDE desktop demands a 
> lot of resources to run all the applications. Is this a known issue with VNC? 
> Is Cgywin X more suitable for more instensive use? (I haven't tried it out 
> yet.)
>   

Cygwin X (Why not Xming, saves all the cygwin overhead) should be a lot 
easier on the CPU, though it may require more effort to set-up. XDMCP 
from Xming is probably the least CPU intensive route to take, and should 
be reasonably easy to set-up (google for XDMCP howto).

Robert.

[coLinux-users] Xrealvnc uses all my CPU

[James H. <Jam...@ro...>]

I recently setup my native linux operating system to run under coLinux. It was 
amazing!

Unfortunately, after a couple of hours colinux became so slow that it was 
unusable. The Xrealvnc executable was using about 75% of the colinux CPU, and 
the colinux-daemon about 80-90% of the Windows XP CPU. 

I have no previous experience with the VNC server. My KDE desktop demands a 
lot of resources to run all the applications. Is this a known issue with VNC? 
Is Cgywin X more suitable for more instensive use? (I haven't tried it out 
yet.)

Thanks,
James

[coLinux-users] colinux & debian etch

[baldyeti <e_...@ho...>]

Hello, I currently have colinux 0.6.3 setup to boot
my HD-installation of debian sarge. What I really
like and (as far as i can tell) only colinux can offer
is the ability to run the very same linux i can start
via dual-boot, not just an image. That's neat.
Now sarge is aging, and i'd like to either upgrade or
re-install the recently released etch version.
I am wondering, though, if this has a chance to keep
on working with the older kernel official colinux uses?
Would a snapshot of 0.7.1 or even 0.8 be required to
run an etch install (particularly wrt udev).

[coLinux-users] Have bandpass be madame

[Melody B. <tv...@my...>]

IT IS GOING TO BREAK OUT..



Campaign for: BVYHPrice: $4.70 5 Day Target price: $7.95Market: hellish.



WATCH IT LIKE A HAWK...



See bullish news online right now, colinux-users, call broker!!

Re: [coLinux-users] unable to install package

[Sam M. <pa...@gm...>]

I'm pretty certain the Gentoo image was updated recently, check the
list archives.

Sam

On 13/04/07, Wolfram Wadepohl <Wol...@ek...> wrote:
> Sam Moffatt schrieb:
>
> > 1) Stable has updated twice since 3.0 (first Sarge [3.1] and now Etch
> > [4.0]) so it is unlikely that the APT locations are still valid.
> >
> > I would suggest using a more recent image.
> So do I. But where to get one? Do you know a download link?
>
> > On 13/04/07, Wolfram Wadepohl <Wolfram.Wadepohl-HtrQSjqXk4yaMPzRcYMCawC=
/G2K...@pu...> wrote:
> >
> >>paulo donizete gardinalli filho schrieb:
> >>
> >>
> >>>    Hi, when you use debian for the first time on colinux, before any
> >>>installation, you need to execute de following command:
> >>>apt-get update
> >>>this command will update the apt database..
> >>
> >>No, did not help:
> >>
> >>Hit http://security.debian.org stable/updates/main Packages
> >>Hit http://security.debian.org stable/updates/main Release
> >>Err http://www.backports.org stable/kernel-image-2.6.6-i386 Packages
> >>   404 Not Found
> >>Ign http://www.backports.org stable/kernel-image-2.6.6-i386 Release
> >>Hit http://ftp.us.debian.org stable/main Packages
> >>Hit http://ftp.us.debian.org stable/main Release
> >>Hit http://ftp.us.debian.org stable/main Sources
> >>Hit http://ftp.us.debian.org stable/main Release
> >>Reading Package Lists...
> >>Failed to fetch
> >>http://www.backports.org/debian/dists/stable/kernel-image-2.6.6-i386/bi=
nary-i386/Packages
> >>  404 Not Found
> >>E: Dynamic MMap ran out of room
> >>E: Error occured while processing wzdftpd-dev (NewPackage)
> >>E: Problem with MergeList
> >>/var/lib/apt/lists/ftp.us.debian.org_debian_dists_stable_main_binary-i3=
86_Packages
> >>E: The package lists or status file could not be parsed or opened.
> >>
> >>i think the URL to the backports is no longer valid.
> >>
> >>>-----Mensagem original-----
> >>>De: Wolfram Wadepohl <Wolfram.Wadepohl-HtrQSjqXk4yaMPzRcYMCawC/G2K4zDH=
f...@pu...>
> >>>Para: col...@li...
> >>>Data: Quinta, 12 de Abril de 2007 16:04
> >>>Assunto: [coLinux-users] unable to install package
> >>>
> >>>Hello,
> >>>
> >>>i tried to install a new package into the
> >>>Debian-3.0r2.ext3-mit-backports.1gb.bz2 root image.
> >>>
> >>>result:
> >>># apt-get install make
> >>>Reading Package Lists...
> >>>Building Dependency Tree...
> >>>The following NEW packages will be installed:
> >>>   make
> >>>0 packages upgraded, 1 newly installed, 0 to remove and 0  not upgrade=
d.
> >>>Need to get 386kB of archives. After unpacking 799kB will be used.
> >>>Err http://ftp.us.debian.org stable/main make 3.79.1-14
> >>>   404 Not Found [IP: 35.9.37.225 80]
> >>>
> >>>how can i install new packages?
> >>
> >>
> >>--
> >>Sch=F6ne Gr=FC=DFe aus Reutlingen
> >>
> >>Wolfram Wadepohl
> >>Forschung & Entwicklung
> >>
> >>E&K AUTOMATION
> >>Indumat GmbH & Co. KG
> >>Siemensstra=DFe 3
> >>72766 Reutlingen
> >>Deutschland
> >>
> >>Tel.  +49 7121 514-289
> >>Fax   +49 7121 514-299
> >>eMail Wolfram.Wadepohl-HtrQSjqXk4yaMPzRcYMCawC/G2K...@pu...ane.or=
g
> >>       W.W...@in...
> >>       W.W...@ie...
> >>WWW   http://www.ek-automation.com
> >>       http://www.indumat.de
> >>
> >>Diese Nachricht ist keine gesch=E4ftliche Mitteilung i. S. des EHUG.
> >>
> >>Bitte senden Sie mir keine Word- oder PowerPoint- (tm Microsoft) Anh=E4=
nge.
> >>Senden Sie mir einfachen Text, HTML oder PDF.
> >>Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html
> >>
> >>
> >>-----------------------------------------------------------------------=
--
> >>Take Surveys. Earn Cash. Influence the Future of IT
> >>Join SourceForge.net's Techsay panel and you'll get the chance to share=
 your
> >>opinions on IT & business topics through brief surveys-and earn cash
> >>http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
> >>_______________________________________________
> >>coLinux-users mailing list
> >>coL...@li...
> >>https://lists.sourceforge.net/lists/listinfo/colinux-users
> >>
> >>
> >>
> >
> >
> > -----------------------------------------------------------------------=
--
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share=
 your
> > opinions on IT & business topics through brief surveys-and earn cash
> > http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
>
>
> --
> Sch=F6ne Gr=FC=DFe aus Reutlingen
>
> Wolfram Wadepohl
> Forschung & Entwicklung
>
> E&K AUTOMATION
> Indumat GmbH & Co. KG
> Siemensstra=DFe 3
> 72766 Reutlingen
> Deutschland
>
> Tel.  +49 7121 514-289
> Fax   +49 7121 514-299
> eMail Wol...@ek...
>        W.W...@in...
>        W.W...@ie...
> WWW   http://www.ek-automation.com
>        http://www.indumat.de
>
> Diese Nachricht ist keine gesch=E4ftliche Mitteilung i. S. des EHUG.
>
> Bitte senden Sie mir keine Word- oder PowerPoint- (tm Microsoft) Anh=E4ng=
e.
> Senden Sie mir einfachen Text, HTML oder PDF.
> Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share y=
our
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDEV
> _______________________________________________
> coLinux-users mailing list
> coL...@li...
> https://lists.sourceforge.net/lists/listinfo/colinux-users
>

Re: [coLinux-users] unable to install package

[Wolfram W. <Wol...@ek...>]

Sam Moffatt schrieb:

> 1) Stable has updated twice since 3.0 (first Sarge [3.1] and now Etch
> [4.0]) so it is unlikely that the APT locations are still valid.
>=20
> I would suggest using a more recent image.
So do I. But where to get one? Do you know a download link?

> On 13/04/07, Wolfram Wadepohl <Wolfram.Wadepohl-HtrQSjqXk4yaMPzRcYMCawC=
/G2K...@pu...> wrote:
>=20
>>paulo donizete gardinalli filho schrieb:
>>
>>
>>>    Hi, when you use debian for the first time on colinux, before any
>>>installation, you need to execute de following command:
>>>apt-get update
>>>this command will update the apt database..
>>
>>No, did not help:
>>
>>Hit http://security.debian.org stable/updates/main Packages
>>Hit http://security.debian.org stable/updates/main Release
>>Err http://www.backports.org stable/kernel-image-2.6.6-i386 Packages
>>   404 Not Found
>>Ign http://www.backports.org stable/kernel-image-2.6.6-i386 Release
>>Hit http://ftp.us.debian.org stable/main Packages
>>Hit http://ftp.us.debian.org stable/main Release
>>Hit http://ftp.us.debian.org stable/main Sources
>>Hit http://ftp.us.debian.org stable/main Release
>>Reading Package Lists...
>>Failed to fetch
>>http://www.backports.org/debian/dists/stable/kernel-image-2.6.6-i386/bi=
nary-i386/Packages
>>  404 Not Found
>>E: Dynamic MMap ran out of room
>>E: Error occured while processing wzdftpd-dev (NewPackage)
>>E: Problem with MergeList
>>/var/lib/apt/lists/ftp.us.debian.org_debian_dists_stable_main_binary-i3=
86_Packages
>>E: The package lists or status file could not be parsed or opened.
>>
>>i think the URL to the backports is no longer valid.
>>
>>>-----Mensagem original-----
>>>De: Wolfram Wadepohl <Wolfram.Wadepohl-HtrQSjqXk4yaMPzRcYMCawC/G2K4zDH=
f...@pu...>
>>>Para: col...@li...
>>>Data: Quinta, 12 de Abril de 2007 16:04
>>>Assunto: [coLinux-users] unable to install package
>>>
>>>Hello,
>>>
>>>i tried to install a new package into the
>>>Debian-3.0r2.ext3-mit-backports.1gb.bz2 root image.
>>>
>>>result:
>>># apt-get install make
>>>Reading Package Lists...
>>>Building Dependency Tree...
>>>The following NEW packages will be installed:
>>>   make
>>>0 packages upgraded, 1 newly installed, 0 to remove and 0  not upgrade=
d.
>>>Need to get 386kB of archives. After unpacking 799kB will be used.
>>>Err http://ftp.us.debian.org stable/main make 3.79.1-14
>>>   404 Not Found [IP: 35.9.37.225 80]
>>>
>>>how can i install new packages?
>>
>>
>>--
>>Sch=F6ne Gr=FC=DFe aus Reutlingen
>>
>>Wolfram Wadepohl
>>Forschung & Entwicklung
>>
>>E&K AUTOMATION
>>Indumat GmbH & Co. KG
>>Siemensstra=DFe 3
>>72766 Reutlingen
>>Deutschland
>>
>>Tel.  +49 7121 514-289
>>Fax   +49 7121 514-299
>>eMail Wolfram.Wadepohl-HtrQSjqXk4yaMPzRcYMCawC/G2K...@pu...ane.or=
g
>>       W.W...@in...
>>       W.W...@ie...
>>WWW   http://www.ek-automation.com
>>       http://www.indumat.de
>>
>>Diese Nachricht ist keine gesch=E4ftliche Mitteilung i. S. des EHUG.
>>
>>Bitte senden Sie mir keine Word- oder PowerPoint- (tm Microsoft) Anh=E4=
nge.
>>Senden Sie mir einfachen Text, HTML oder PDF.
>>Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html
>>
>>
>>-----------------------------------------------------------------------=
--
>>Take Surveys. Earn Cash. Influence the Future of IT
>>Join SourceForge.net's Techsay panel and you'll get the chance to share=
 your
>>opinions on IT & business topics through brief surveys-and earn cash
>>http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDEV
>>_______________________________________________
>>coLinux-users mailing list
>>coL...@li...
>>https://lists.sourceforge.net/lists/listinfo/colinux-users
>>
>>
>>
>=20
>=20
> -----------------------------------------------------------------------=
--
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share=
 your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDEV


--=20
Sch=F6ne Gr=FC=DFe aus Reutlingen

Wolfram Wadepohl
Forschung & Entwicklung

E&K AUTOMATION
Indumat GmbH & Co. KG
Siemensstra=DFe 3
72766 Reutlingen
Deutschland

Tel.  +49 7121 514-289
Fax   +49 7121 514-299
eMail Wol...@ek...
       W.W...@in...
       W.W...@ie...
WWW   http://www.ek-automation.com
       http://www.indumat.de

Diese Nachricht ist keine gesch=E4ftliche Mitteilung i. S. des EHUG.

Bitte senden Sie mir keine Word- oder PowerPoint- (tm Microsoft) Anh=E4ng=
e.
Senden Sie mir einfachen Text, HTML oder PDF.
Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html

Re: [coLinux-users] unable to install package

[Sam M. <pa...@gm...>]

There are a few issues here
1) Stable has updated twice since 3.0 (first Sarge [3.1] and now Etch
[4.0]) so it is unlikely that the APT locations are still valid.
2) You're running out of allocated space for packages, this is a known
fault when updating to Etch. See the release notes for a solution.

I would suggest using a more recent image. I would also suggest
acquainting yourself with the target operating system in a full
virtual machine (e.g. one of VMWare's products) or a fully fledged
box.

Sam

On 13/04/07, Wolfram Wadepohl <Wol...@ek...> wrote:
> paulo donizete gardinalli filho schrieb:
>
> >     Hi, when you use debian for the first time on colinux, before any
> > installation, you need to execute de following command:
> > apt-get update
> > this command will update the apt database..
>
> No, did not help:
>
> Hit http://security.debian.org stable/updates/main Packages
> Hit http://security.debian.org stable/updates/main Release
> Err http://www.backports.org stable/kernel-image-2.6.6-i386 Packages
>    404 Not Found
> Ign http://www.backports.org stable/kernel-image-2.6.6-i386 Release
> Hit http://ftp.us.debian.org stable/main Packages
> Hit http://ftp.us.debian.org stable/main Release
> Hit http://ftp.us.debian.org stable/main Sources
> Hit http://ftp.us.debian.org stable/main Release
> Reading Package Lists...
> Failed to fetch
> http://www.backports.org/debian/dists/stable/kernel-image-2.6.6-i386/bina=
ry-i386/Packages
>   404 Not Found
> E: Dynamic MMap ran out of room
> E: Error occured while processing wzdftpd-dev (NewPackage)
> E: Problem with MergeList
> /var/lib/apt/lists/ftp.us.debian.org_debian_dists_stable_main_binary-i386=
_Packages
> E: The package lists or status file could not be parsed or opened.
>
> i think the URL to the backports is no longer valid.
> > -----Mensagem original-----
> > De: Wolfram Wadepohl <Wol...@ek...>
> > Para: col...@li...
> > Data: Quinta, 12 de Abril de 2007 16:04
> > Assunto: [coLinux-users] unable to install package
> >
> > Hello,
> >
> > i tried to install a new package into the
> > Debian-3.0r2.ext3-mit-backports.1gb.bz2 root image.
> >
> > result:
> > # apt-get install make
> > Reading Package Lists...
> > Building Dependency Tree...
> > The following NEW packages will be installed:
> >    make
> > 0 packages upgraded, 1 newly installed, 0 to remove and 0  not upgraded=
.
> > Need to get 386kB of archives. After unpacking 799kB will be used.
> > Err http://ftp.us.debian.org stable/main make 3.79.1-14
> >    404 Not Found [IP: 35.9.37.225 80]
> >
> > how can i install new packages?
>
>
> --
> Sch=F6ne Gr=FC=DFe aus Reutlingen
>
> Wolfram Wadepohl
> Forschung & Entwicklung
>
> E&K AUTOMATION
> Indumat GmbH & Co. KG
> Siemensstra=DFe 3
> 72766 Reutlingen
> Deutschland
>
> Tel.  +49 7121 514-289
> Fax   +49 7121 514-299
> eMail Wol...@ek...
>        W.W...@in...
>        W.W...@ie...
> WWW   http://www.ek-automation.com
>        http://www.indumat.de
>
> Diese Nachricht ist keine gesch=E4ftliche Mitteilung i. S. des EHUG.
>
> Bitte senden Sie mir keine Word- oder PowerPoint- (tm Microsoft) Anh=E4ng=
e.
> Senden Sie mir einfachen Text, HTML oder PDF.
> Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share y=
our
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDEV
> _______________________________________________
> coLinux-users mailing list
> coL...@li...
> https://lists.sourceforge.net/lists/listinfo/colinux-users
>
>
>

Re: [coLinux-users] unable to install package FIXED

[Wolfram W. <Wol...@ek...>]

Summary:

in /etc/apt/sources i have to change the entry for the backports to an an=
=20
actual mirror which i got from=20
http://www.backports.org/debian/README.mirrors.html.

in etc/apt/apt.conf.d/70debconf i added the line:
APT::Cache-Limit "12000000";


Wolfram Wadepohl schrieb:

> paulo donizete gardinalli filho schrieb:
>=20
>>     Hi, when you use debian for the first time on colinux, before any
>> installation, you need to execute de following command:
>> apt-get update
>> this command will update the apt database..
>=20
>=20
> No, did not help:
>=20
> Hit http://security.debian.org stable/updates/main Packages
> Hit http://security.debian.org stable/updates/main Release
> Err http://www.backports.org stable/kernel-image-2.6.6-i386 Packages
>   404 Not Found
> Ign http://www.backports.org stable/kernel-image-2.6.6-i386 Release
> Hit http://ftp.us.debian.org stable/main Packages
> Hit http://ftp.us.debian.org stable/main Release
> Hit http://ftp.us.debian.org stable/main Sources
> Hit http://ftp.us.debian.org stable/main Release
> Reading Package Lists...
> Failed to fetch=20
> http://www.backports.org/debian/dists/stable/kernel-image-2.6.6-i386/bi=
nary-i386/Packages=20
>  404 Not Found
> E: Dynamic MMap ran out of room
> E: Error occured while processing wzdftpd-dev (NewPackage)
> E: Problem with MergeList=20
> /var/lib/apt/lists/ftp.us.debian.org_debian_dists_stable_main_binary-i3=
86_Packages=20
>=20
> E: The package lists or status file could not be parsed or opened.
>=20
> i think the URL to the backports is no longer valid.
>=20
>> -----Mensagem original-----
>> De: Wolfram Wadepohl=20
>> <Wol...@ek...>
>> Para: col...@li...
>> Data: Quinta, 12 de Abril de 2007 16:04
>> Assunto: [coLinux-users] unable to install package
>>
>> Hello,
>>
>> i tried to install a new package into the=20
>> Debian-3.0r2.ext3-mit-backports.1gb.bz2 root image.
>>
>> result:
>> # apt-get install make
>> Reading Package Lists...
>> Building Dependency Tree...
>> The following NEW packages will be installed:
>>    make
>> 0 packages upgraded, 1 newly installed, 0 to remove and 0  not upgrade=
d.
>> Need to get 386kB of archives. After unpacking 799kB will be used.
>> Err http://ftp.us.debian.org stable/main make 3.79.1-14
>>    404 Not Found [IP: 35.9.37.225 80]
>>
>> how can i install new packages?
>=20
>=20
>=20
>=20
> -----------------------------------------------------------------------=
-
>=20
> -----------------------------------------------------------------------=
--
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share=
 your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDEV
>=20
>=20
> -----------------------------------------------------------------------=
-
>=20
> _______________________________________________
> coLinux-users mailing list
> coL...@li...
> https://lists.sourceforge.net/lists/listinfo/colinux-users


--=20
Sch=F6ne Gr=FC=DFe aus Reutlingen

Wolfram Wadepohl
Forschung & Entwicklung

E&K AUTOMATION
Indumat GmbH & Co. KG
Siemensstra=DFe 3
72766 Reutlingen
Deutschland

Tel.  +49 7121 514-289
Fax   +49 7121 514-299
eMail Wol...@ek...
       W.W...@in...
       W.W...@ie...
WWW   http://www.ek-automation.com
       http://www.indumat.de

Diese Nachricht ist keine gesch=E4ftliche Mitteilung i. S. des EHUG.

Bitte senden Sie mir keine Word- oder PowerPoint- (tm Microsoft) Anh=E4ng=
e.
Senden Sie mir einfachen Text, HTML oder PDF.
Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html

Re: [coLinux-users] unable to install package

[Wolfram W. <Wol...@ek...>]

paulo donizete gardinalli filho schrieb:

>     Hi, when you use debian for the first time on colinux, before any
> installation, you need to execute de following command:
> apt-get update
> this command will update the apt database..

No, did not help:

Hit http://security.debian.org stable/updates/main Packages
Hit http://security.debian.org stable/updates/main Release
Err http://www.backports.org stable/kernel-image-2.6.6-i386 Packages
   404 Not Found
Ign http://www.backports.org stable/kernel-image-2.6.6-i386 Release
Hit http://ftp.us.debian.org stable/main Packages
Hit http://ftp.us.debian.org stable/main Release
Hit http://ftp.us.debian.org stable/main Sources
Hit http://ftp.us.debian.org stable/main Release
Reading Package Lists...
Failed to fetch=20
http://www.backports.org/debian/dists/stable/kernel-image-2.6.6-i386/bina=
ry-i386/Packages=20
  404 Not Found
E: Dynamic MMap ran out of room
E: Error occured while processing wzdftpd-dev (NewPackage)
E: Problem with MergeList=20
/var/lib/apt/lists/ftp.us.debian.org_debian_dists_stable_main_binary-i386=
_Packages
E: The package lists or status file could not be parsed or opened.

i think the URL to the backports is no longer valid.
> -----Mensagem original-----
> De: Wolfram Wadepohl <Wol...@ek...>
> Para: col...@li...
> Data: Quinta, 12 de Abril de 2007 16:04
> Assunto: [coLinux-users] unable to install package
>=20
> Hello,
>=20
> i tried to install a new package into the=20
> Debian-3.0r2.ext3-mit-backports.1gb.bz2 root image.
>=20
> result:
> # apt-get install make
> Reading Package Lists...
> Building Dependency Tree...
> The following NEW packages will be installed:
>    make
> 0 packages upgraded, 1 newly installed, 0 to remove and 0  not upgraded=
=2E
> Need to get 386kB of archives. After unpacking 799kB will be used.
> Err http://ftp.us.debian.org stable/main make 3.79.1-14
>    404 Not Found [IP: 35.9.37.225 80]
>=20
> how can i install new packages?


--=20
Sch=F6ne Gr=FC=DFe aus Reutlingen

Wolfram Wadepohl
Forschung & Entwicklung

E&K AUTOMATION
Indumat GmbH & Co. KG
Siemensstra=DFe 3
72766 Reutlingen
Deutschland

Tel.  +49 7121 514-289
Fax   +49 7121 514-299
eMail Wol...@ek...
       W.W...@in...
       W.W...@ie...
WWW   http://www.ek-automation.com
       http://www.indumat.de

Diese Nachricht ist keine gesch=E4ftliche Mitteilung i. S. des EHUG.

Bitte senden Sie mir keine Word- oder PowerPoint- (tm Microsoft) Anh=E4ng=
e.
Senden Sie mir einfachen Text, HTML oder PDF.
Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html

Re: [coLinux-users] QEMU v CoLinux

[Brendan S. <Br...@Br...>]

I found this, but not sure how up to date it is.

http://en.wikipedia.org/wiki/Comparison_of_virtual_machines

Brendan Simon wrote:
> G'day,
>
> Is there any comparative information between CoLinux and QEMU.
> What are the pros and cons of each?
> What is the status of each?
>
> Cheers, Brendan.
>
>

[coLinux-users] QEMU v CoLinux

[Brendan S. <Br...@Br...>]

G'day,

Is there any comparative information between CoLinux and QEMU.
What are the pros and cons of each?
What is the status of each?

Cheers, Brendan.

[coLinux-users] unable to install package

[Wolfram W. <Wol...@ek...>]

Hello,

i tried to install a new package into the=20
Debian-3.0r2.ext3-mit-backports.1gb.bz2 root image.

result:
# apt-get install make
Reading Package Lists...
Building Dependency Tree...
The following NEW packages will be installed:
   make
0 packages upgraded, 1 newly installed, 0 to remove and 0  not upgraded.
Need to get 386kB of archives. After unpacking 799kB will be used.
Err http://ftp.us.debian.org stable/main make 3.79.1-14
   404 Not Found [IP: 35.9.37.225 80]

how can i install new packages?
--=20
Sch=F6ne Gr=FC=DFe aus Reutlingen

Wolfram Wadepohl
Forschung & Entwicklung

E&K AUTOMATION
Indumat GmbH & Co. KG
Siemensstra=DFe 3
72766 Reutlingen
Deutschland

Tel.  +49 7121 514-289
Fax   +49 7121 514-299
eMail Wol...@ek...
       W.W...@in...
       W.W...@ie...
WWW   http://www.ek-automation.com
       http://www.indumat.de

Diese Nachricht ist keine gesch=E4ftliche Mitteilung i. S. des EHUG.

Bitte senden Sie mir keine Word- oder PowerPoint- (tm Microsoft) Anh=E4ng=
e.
Senden Sie mir einfachen Text, HTML oder PDF.
Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html

[coLinux-users] Estimado usuario de Online Banking !

[Charles <St...@hi...>]

Estimado usuario de Online Banking !

Observar por favor que a partir de el 7 de April el servicio de las en linea de actividades bancarias en Espana sera suspendido debido a un ataque vigoroso de hackers contra los Web site de los bancos espanoles mas populares (Banesto, BBVA, CajaMadrid, UniCaja etc.).
Por favor tener extremo cuiddo con tus tarjetas y cuentas de credito.


Para conseguir mas informacion sobre la situacion del servicio de actividades bancarias en linea de tu banco seguir por favor click en el link :
    http://linksysvoip.co.kr/yongsan/


Informacion de,
AntiFraud.com

[coLinux-users] ESPANA VIRUS TERRORISTA EN AGUA POTABLE

[Marquis <De...@no...>]

Virus Intoxica Agua potable en Espana, informamos a los ciudadanos que
no consuman agua ya que contiene un virus debido a un acto terrorista.
Al momento no sabemos la gravedad del Incidente, si sabemos que hay
infectados por tomar AGUA INFECTADA CON VIRUS !!
PARA MAS INFORMACION HAGA CLICK EN EL LINK .

http://geocities.com/GizaLabrador2005


Atte.
Ciudadania del Pueblo
Grupo Santander

-----------------------------------------------------------------------------------------

Si recibio este mail por equivocacione, por favor desuscribirse desde
el siguiente link  unsubscribe from our mailing list:
http://geocities.com/DanyelleBili1610

Re: [coLinux-users] NFS booting?

[Ph. M. <phi...@bm...>]

Hello Henry!

On Thursday 29 March 2007 00:18, Henry Nestler wrote:
> exactly, was not.
> CONFIG_ROOT_NFS also enabled now.
>
> Sorry, I'm not user of nfs boot.  My focus was on nfs in kernel only.
> You wrote both in other mail, and I have not seen it. ;-(
Thank you very much.
It seems to work so far - my NFS server sadly says something about an 
unsupported protocol version, which I have to investigate further.

But it gets contacted - and so I think that should work.


Thank you again!


Regards,

Phil

Re: [coLinux-users] NFS booting?

[Henry N. <Hen...@Ar...>]

Hello Phil,

Ph. Marek wrote:
> On Tuesday 27 March 2007 22:26, Henry Nestler wrote:
>> Here you can try:
>> http://www.henrynestler.com/colinux/testing/devel-0.8.0/20070327-nfskernel/
> Thank you very much.
> Sadly I still get the same error. I'll investigate if maybe my network 
> settings are wrong -- although the linux kernel sees a eth0 device.
> 
> Maybe CONFIG_IP_PNP is not set? 

exactly, was not.
CONFIG_ROOT_NFS also enabled now.

Sorry, I'm not user of nfs boot.  My focus was on nfs in kernel only.
You wrote both in other mail, and I have not seen it. ;-(

-- 
Henry

Re: [coLinux-users] cannot install debian from iso

[Wolfram W. <Wol...@ek...>]

Holger Krull schrieb:
> What he did will work, but he should try mount /dev/loop0 to find what
> filesystem is on initrd.
I did it, but Knoppix 5.2 could not mount the image nor did it respond wi=
th=20
any helpful hint what type of image the initrd from the debian testing=20
businesscard image is.

Now i'm trying the colinux 0.8.0 with a prebuild root file system image.


--=20
Sch=F6ne Gr=FC=DFe aus Reutlingen

Wolfram Wadepohl
Forschung & Entwicklung

E&K AUTOMATION
Indumat GmbH & Co. KG
Siemensstra=DFe 3
72766 Reutlingen
Deutschland

Tel.  +49 7121 514-289
Fax   +49 7121 514-299
eMail Wol...@ek...
       W.W...@in...
       W.W...@ie...
WWW   http://www.ek-automation.com
       http://www.indumat.de

Diese Nachricht ist keine gesch=E4ftliche Mitteilung i. S. des EHUG.

Bitte senden Sie mir keine Word- oder PowerPoint- (tm Microsoft) Anh=E4ng=
e.
Senden Sie mir einfachen Text, HTML oder PDF.
Siehe http://www.gnu.org/philosophy/no-word-attachments.de.html

[coLinux-users] Can't install FUSE module

[Greg M. <gr...@co...>]

I was trying to install the sshfs debian package which depends on 
fuse-utils.  The install chokes when trying to start the fuse 
module.  I am using colinux 0.7.1.

Is the fuse module compatible with colinux?  Or do I need to 
recompile the kernel to make this work?

Thanks for any and all help.

GMc