Menu
▾
▴
colinux-devel
|
From: Thomas F. <tf...@no...> - 2004-02-09 17:06:03
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello coLinux-hackers, I build colinux-20040208 with the first network-init patch from source. My problem is that I receive the message: "Monitor terminated, reason 7". In detail: after starting the daemon the console pops up and I see the begin of the kernel boot: ....BogoMIPS....CPU:.... Linux NET4.0... Initializing RT netlink socket.. Starting kswapd... Journalled Block Device driver loaded. The message with the "Block Device" is the last in the console. The console stays open and I see the message that the TAP-WIN network was disconnected (message in systemtray). In the MS-Dos window I see Monitor terminated, reason 7 and other messages that the Monitor is shutting down etc. Any Hints? Thanks and regards, Thomas -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAJ78ZnwJBIFTVIqwRAkaXAKCAXddyYUhy4EPBtrZbRF+/aS8YCACgyBhE /DkzYAYIyEsGzGvno6Gon3w= =9YT5 -----END PGP SIGNATURE----- |
|
From: Dan A. <da...@gm...> - 2004-02-09 20:57:19
|
On Mon, Feb 09, 2004 at 05:10:49PM -0000, Thomas Fritzsche wrote:
> I build colinux-20040208 with the first network-init patch from source. My
> problem is that I receive the message: "Monitor terminated, reason 7".
The value originates from this enum:
typedef enum {
CO_TERMINATE_END=0,
CO_TERMINATE_REBOOT,
CO_TERMINATE_POWEROFF,
CO_TERMINATE_PANIC,
CO_TERMINATE_HALT,
CO_TERMINATE_FORCED_OFF,
CO_TERMINATE_FORCED_END,
CO_TERMINATE_INVALID_OPERATION,
} co_termination_reason_t;
Which suggests CO_TERMINATE_INVALID_OPERATION.
This termination code is omitted from within the Linux kernel in 2
locations:
static inline void * ioremap (unsigned long offset, unsigned long size)
{
+#ifdef CONFIG_COOPERATIVE
+ co_debug("ioremap %x:%d\n", offset, size);
+ co_terminate(CO_TERMINATE_INVALID_OPERATION);
+#endif
return __ioremap(offset, size, 0);
}
static inline void * ioremap_nocache (unsigned long offset, unsigned
long size)
{
+#ifdef CONFIG_COOPERATIVE
+ co_debug("ioremap %x:%d\n", offset, size);
+ co_terminate(CO_TERMINATE_INVALID_OPERATION);
+#endif
return __ioremap(offset, size, _PAGE_PCD);
}
If you have some kernel debugging experience, I suggest you investigate
from where one of these functions is called on your setup.
--
Dan Aloni
da...@gm...
|
|
From: Dan A. <da...@gm...> - 2004-02-09 21:40:58
|
On Mon, Feb 09, 2004 at 10:57:01PM +0200, Dan Aloni wrote: > On Mon, Feb 09, 2004 at 05:10:49PM -0000, Thomas Fritzsche wrote: > > > I build colinux-20040208 with the first network-init patch from source. My > > problem is that I receive the message: "Monitor terminated, reason 7". I take that back. Verify your compiler versions first. > > If you have some kernel debugging experience, I suggest you investigate > from where one of these functions is called on your setup. -- Dan Aloni da...@gm... |
|
From: Thomas F. <tf...@no...> - 2004-02-09 21:48:38
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Dan, I build this with the native debian linux-gcc: gcc --version gcc (GCC) 3.3.3 20040125 (prerelease) (Debian) I read that there are problem with 2.* gcc's, any trouble with 3.3.3? Thanks and regards, Thomas > On Mon, Feb 09, 2004 at 10:57:01PM +0200, Dan Aloni wrote: >> On Mon, Feb 09, 2004 at 05:10:49PM -0000, Thomas Fritzsche wrote: >> >> > I build colinux-20040208 with the first network-init patch from >> source. My >> > problem is that I receive the message: "Monitor terminated, reason 7". > > I take that back. Verify your compiler versions first. >> >> If you have some kernel debugging experience, I suggest you investigate >> from where one of these functions is called on your setup. > > -- > Dan Aloni > da...@gm... > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAKAFanwJBIFTVIqwRAufWAKC2yVKwKluS83DcvJMY1PNuVFYFsgCgxZcj Htgdjnh3qBQJisahi4uupFE= =OmrM -----END PGP SIGNATURE----- |
|
From: Thomas F. <tf...@no...> - 2004-02-10 08:41:09
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello Dan, today I made the followning test. I used my self build binary files (console , daemon, linux.sys ) and just used your kernel file from the "flamed chicken" release. This works without the "termination message reason 7". So this is a kernel issue. You wrote about the used gcc version. Is this issue solved? I'm at work now so I could just have a look at the bin-version of pre2 release. But a cat /proc/version gives me the same debian gcc-version that I use. (I don't have checked gcc-version of your pre1 release) A few commands about the bin-pre2 release: - - I also have 99% CPU load for the console. If I use the daemon without the console this is no issue. - - For some reason I don't have network connection after installing the new version of the TAP-WIN32 driver. I think this is no colinux issue. I just disabled IP-sharing and enabled it again and that solved this problem. - - The network corruption is solved. I'm also missing the delay connecting from ssh (putty) - - I still have this fsck issue!?! I enable the rootfs option again a have this error. I tried to fix this by running fsck manualy without success. Thanks and regards, Thomas > On Mon, Feb 09, 2004 at 10:57:01PM +0200, Dan Aloni wrote: >> On Mon, Feb 09, 2004 at 05:10:49PM -0000, Thomas Fritzsche wrote: >> >> > I build colinux-20040208 with the first network-init patch from >> source. My >> > problem is that I receive the message: "Monitor terminated, reason 7". > > I take that back. Verify your compiler versions first. >> >> If you have some kernel debugging experience, I suggest you investigate >> from where one of these functions is called on your setup. > > -- > Dan Aloni > da...@gm... > > > ------------------------------------------------------- > The SF.Net email is sponsored by EclipseCon 2004 > Premiere Conference on Open Tools Development and Integration > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > http://www.eclipsecon.org/osdn > _______________________________________________ > coLinux-devel mailing list > coL...@li... > https://lists.sourceforge.net/lists/listinfo/colinux-devel > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAKJpSnwJBIFTVIqwRAlNqAJ9UnCfspkS6wdd6p1BcJw+LtVJJ4ACdE62+ l3A32u5H6DdjHfE93RHNeHY= =QnhH -----END PGP SIGNATURE----- |
|
From: Thomas F. <tf...@no...> - 2004-02-10 18:08:41
|
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi colinuxer, I found an other easy way to reproduce this error. I just used colinux (pre2) with the standard-debian-image. I updated the system to "testing" with apt-get and installed gcc (3.3.2), make... and the other stuff to build the kernel. I then used patch and linux-config file from the same colinux release (pre2) and compiled colinux-kernel within colinux. Then I copy the vmlinux kernel back to the windows system and replaced just the vmlinux file with the new compiled version. If I try to start again I also receive this termination. Is there someone how could build the colinux-kernel within colinux? Thanks and regards, Thomas > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hello coLinux-hackers, > > I build colinux-20040208 with the first network-init patch from source. My > problem is that I receive the message: "Monitor terminated, reason 7". > In detail: > after starting the daemon the console pops up and I see the begin of the > kernel boot: > > ....BogoMIPS....CPU:.... Linux NET4.0... Initializing RT netlink socket.. > Starting kswapd... Journalled Block Device driver loaded. > > The message with the "Block Device" is the last in the console. The > console stays open and I see the message that the TAP-WIN network was > disconnected (message in systemtray). > > In the MS-Dos window I see Monitor terminated, reason 7 and other messages > that the Monitor is shutting down etc. > > Any Hints? > > Thanks and regards, > Thomas > > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.2.4 (GNU/Linux) > > iD8DBQFAJ78ZnwJBIFTVIqwRAkaXAKCAXddyYUhy4EPBtrZbRF+/aS8YCACgyBhE > /DkzYAYIyEsGzGvno6Gon3w= > =9YT5 > -----END PGP SIGNATURE----- > > > ------------------------------------------------------- > The SF.Net email is sponsored by EclipseCon 2004 > Premiere Conference on Open Tools Development and Integration > See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. > http://www.eclipsecon.org/osdn > _______________________________________________ > coLinux-devel mailing list > coL...@li... > https://lists.sourceforge.net/lists/listinfo/colinux-devel > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFAKR9BnwJBIFTVIqwRAlSsAJ9tt0+frn9s2atFLqowBHMj/CIY0gCfe0Mn U36b0PTK/nzRjs8J4lfpdKU= =rDwe -----END PGP SIGNATURE----- |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X