hello, every one ! when i run colinux on my thinkpad x200 win7 system , i met a problem.
when colinux start, run to "Calibrating delay loop" , the whole win7 systme hang! can not move cursor and do any thing else.
hardware: thinkpad x200 , cpu: firstname.lastname@example.orgGHz, 2.40GHz, memory: 2GB
coliux version: 0.7.9, 0.7.7.1
linux image: Debian-5.0r2-lenny
start script: debian.bat
set COLINUX_CONSOLE_FONT=Lucida Console:12
start /affinity 2 "colinux-daemon.exe -d -v 3 -t nt @debian-lenny.conf"
# This is an example for a configuration file that can
# be passed to colinux-daemon in this manner:
# colinux-daemon @example.conf
# Note that you can still prepend or append configuration and
# boot parameters before and after '@', or you can use more
# that one '@ to load several settings one after another.
# colinux-daemon @example.conf @overrider.conf mem=32
# Full list of config params is listed in colinux-daemon.txt.
# The default kernel
# File contains the root file system.
# Download and extract preconfigured file from SF "Images for 2.6".
# Swap device, should be an empty file with 128..512MB.
# Tell kernel the name of root device (mostly /dev/cobd0,
# /dev/cobd/0 on Gentoo)
# This parameter will be forward to Linux kernel.
# Additional kernel parameters (ro = rootfs mount read only)
# Initrd installs modules into the root file system.
# Need only on first boot.
# Maximal memory for linux guest
# Select console size, default is 80x25
# Slirp for internet connection (outgoing)
# Inside running coLinux configure eth0 with this static settings:
# ipaddress 10.0.2.15 broadcast 10.0.2.255 netmask 255.255.255.0
# gateway 10.0.2.2 nameserver 10.0.2.3
# Tuntap as private network between guest and host on second linux device
# Setup for serial device
#ttys0=COM1,"BAUD=115200 PARITY=n DATA=8 STOP=1 dtr=on rts=on"
# Run an application on colinux start (Sample Xming, a Xserver)
#exec0=C:\Programs\Xming\Xming.exe,":0 -clipboard -multiwindow -ac"
Add lpj to the kernel command line:
The value does no matter, because coLinux does not use bogomips for delays.
An other problem can be the /affinity. coLinux by default will run on CPU0, you can not force to use other CPU with the start command. Please try to run coLinux without this.
Thank you henryn! I will try it!
Hello henryn, I try it again! It hangs again!
bio: create slab <bio-0> at 0
Sign up for the SourceForge newsletter:
You seem to have CSS turned off.
Please don't fill out this field.