Re: [Clonezilla-server-edition] Clonezilla SE (DRBL Live)
A partition and disk imaging/cloning program
Brought to you by:
steven_shiau
|
From: Steven S. <st...@nc...> - 2011-03-29 14:07:53
|
This are still some issues about testing DRBL live, especially the unfs3
issue.
Please give stable DRBL a try.
Steven.
On 03/26/2011 12:14 AM, Paul Warren wrote:
> I have been using Clonezilla Live for some time and I would now like to try
> using Clonezilla SE. I dowloaded the latest DRBL Live ISO
> (drbl-live-xfce-1.0.2-46-i686.iso) and used tuxboot to put this on a USB
> flash drive. I have used this flash drive to boot a spare PC. Once the GUI
> comes up, I click on the Clonzilla Server icon to get things going. I
> choose 'dhcp' to configure the network card. Since there is only one
> network card, I choose 'Y' to the question "Do you want to lease IP
> addresses to PXE/Etherboot clients only". The file that I want to send to
> the clients is on a Windows file server, so I select the option to connect
> to a samba server and provide all of the needed config. I next choose to
> set the mode for "All" clients. I then go through setting up the Clonezilla
> mode options and choose the image to restore. I select "multicast restore"
> and "clients-to-wait" with 1 client. I eventually end up at a message that
> says "DO NOT CLOSE THIS WINDOW UNTIL CLIENTS FINISH THE CLONE!" at which
> time I boot the PC via the network controller. The PC gets an IP address
> (verified via 'cat /var/lib/dhcp/dhcpd.leases' on the DRBL Live server) and
> begins booting the DRBL client. After the main splash screen some lines of
> text scroll by and then things seem to stop. I've waited several minutes to
> see if anything will happen, but nothing seems to be going on. When I press
> 'Enter' on the client PC I get a command prompt ('#') with a few commands
> available. Am I supposed to run a command here to start the process? Have
> I done something wrong? Both the DRBL server and the PC client are
> connected to the same switch, so I hope that eliminates any potential
> multicast issues for my test. Where should I begin troubleshooting?
>
> Thanks!
>
> - Paul
>
>
>
> ------------------------------------------------------------------------------
> Enable your software for Intel(R) Active Management Technology to meet the
> growing manageability and security demands of your customers. Businesses
> are taking advantage of Intel(R) vPro (TM) technology - will your software
> be a part of the solution? Download the Intel(R) Manageability Checker
> today! http://p.sf.net/sfu/intel-dev2devmar
> _______________________________________________
> Clonezilla-server-edition mailing list
> Clo...@li...
> https://lists.sourceforge.net/lists/listinfo/clonezilla-server-edition
--
Steven Shiau <steven _at_ nchc org tw> <steven _at_ stevenshiau org>
National Center for High-performance Computing, Taiwan.
http://www.nchc.org.tw
Public Key Server PGP Key ID: 1024D/9762755A
Fingerprint: A2A1 08B7 C22C 3D06 34DB F4BC 08B3 E3D7 9762 755A
|