Speed up/Optimize Clonezilla's copy?
A partition and disk imaging/cloning program
Brought to you by:
steven_shiau
Menu
▾
▴
Hello,
I am trying to speed up the cloning/imaging I do with clonezilla. I've noticed when doing device2device copy or image2device, even a 128GB m.2 drive can take ~2 hours to finish. Is there any information on this to improve the speed of cloning? I have been unable to find anything online about this or in the documentation. I'll try digging through the forums here but would appreciate any guidance. Clonezilla has been super useful for both work and personal use and if I can get it to be as quick as other solutions that'd be even better.
For context: I am typically copying windows installation drives, usually SATA and m.2 SSD's. I also sometimes have to make an image from the 'old' disk and image it to a new machine, these tasks both take ~2 Hours for 128GB & 256GB devices.
Speeding up the cloning process with Clonezilla can depend on various factors. Here are some tips and considerations to potentially improve the cloning speed:
Use SSDs for Source and Destination: Clonezilla's speed can be bottlenecked by the read/write speed of your storage devices. Ensure that both the source and destination drives are solid-state drives (SSDs) rather than traditional hard disk drives (HDDs). SSDs are significantly faster.
Check SATA Interface: If you are cloning SATA SSDs, make sure that your motherboard and cables support SATA III (6Gbps) for maximum data transfer rates. Older SATA interfaces may limit the speed.
USB 3.0 or Higher: If you are using external drives as the destination, make sure you are using USB 3.0 or higher ports and cables for faster data transfer rates.
Use Proper Imaging: When creating an image from the source drive, consider using the "savedisk" option in Clonezilla to save the image to an external storage device. Then, when restoring the image to a new machine, the "restoredisk" option can be faster than device-to-device copy.
Compression Level: Clonezilla offers options for compression during the imaging process. Depending on your CPU's power, you can experiment with different compression levels to see if a lower compression level results in faster imaging.
Multicasting: If you need to clone multiple machines simultaneously, Clonezilla supports multicasting, which can be more efficient than imaging machines one by one. However, this requires additional setup and network infrastructure.
Exclude Unnecessary Files: If you are cloning Windows installations, consider excluding unnecessary files and directories from the clone, such as pagefile.sys, hiberfil.sys, and the "System Volume Information" folder. This can reduce the amount of data being cloned and speed up the process.
Update Clonezilla: Make sure you are using the latest version of Clonezilla, as newer versions may have performance improvements and bug fixes.
Hardware Differences: If you are imaging a drive and then restoring it to a different machine, keep in mind that hardware differences between the source and destination machines can affect the speed of the cloning process. In some cases, it may be necessary to reinstall drivers or adjust settings after restoring the image to the new machine.
Consider Alternatives: Depending on your needs, you may also want to explore alternative cloning solutions that may offer better performance for your specific use case.
Remember that the actual speed of the cloning process can vary based on the specific hardware and software configurations, so it may take some trial and error to find the optimal settings for your setup. You must need to know about Telecom network offers. For more information please visit https://entireways.com/