Hi,
I'm trying to install a disk image took with clonezilla, but after choosing my resolution (first screen), I have a loading screen "Loading /live/vmlinuz.." who do not deseppear after more than one hour. What can I do?
Thanks
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Thanks for your answer, but it doesn't help.
More information about my problem:
- Material: Dell XPS L501X
- Windows 7 64bits
- I had a problem with my hard drive and an alert message from the bios, and also on Windows.
- I tried to fix it with a disk defragmentation, checkDisk, but it doesn’t work and I saw a bad quality of the hard drive with Defraggler.
- I installed Clonezilla with Active Iso Burner on a CD
- I used the CD to make an image of the Hard Drive, with a verification of the image and I had no problem.
- I bought a new Hard drive: WD – 2,5 pouces – 500Go – 7200t
- I put it in place, and I booted my computer with Clonezilla CD, and after choosing my resolution I had the lessage “"Loading /live/vmlinuz.."
- I decided to use my recovery Windows CD, I reinstall windows (without driver)
- I tried again to reinstall my clone (to avoid to reinstall all applications, drivers, settings,..), and I had the same message “Loading /live/vmlinuz..". I wait more than 3 hours but nothing happens
Any ideas?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Which "alert message from the bios" did it gave ? (acoustically ?, how many times ?)
Have you made a memory test (your first screen) ?
Have you startet in RAM mode (second screen) ?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi Fusi,
I had an alert « bios » message before to change the hard drive each time I launched the PC. But maybe this is a Dell feature, I had the same kind of message when my battery with HS, with the text: “press F1 to continue”
By selecting Memory Test using MemTest86+, I have no problems found.
By selecting Clonezilla Live (800x600) or RAM mode or Safe Graphic mode or Failsafe mode I arrive on a black screen with the message “Loading /live/vmlinuz.." and nothing happen after.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Looks like it's kernel/hardware support issue.
Please try different versions of Clonezilla live, e.g. i686, i386, amd64.
Also, those Ubuntu-based Clonezilla live also give them a try.
Steven.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
I'm trying to install a disk image took with clonezilla, but after choosing my resolution (first screen), I have a loading screen "Loading /live/vmlinuz.." who do not deseppear after more than one hour. What can I do?
Thanks
Thanks for your answer, but it doesn't help.
More information about my problem:
- Material: Dell XPS L501X
- Windows 7 64bits
- I had a problem with my hard drive and an alert message from the bios, and also on Windows.
- I tried to fix it with a disk defragmentation, checkDisk, but it doesn’t work and I saw a bad quality of the hard drive with Defraggler.
- I installed Clonezilla with Active Iso Burner on a CD
- I used the CD to make an image of the Hard Drive, with a verification of the image and I had no problem.
- I bought a new Hard drive: WD – 2,5 pouces – 500Go – 7200t
- I put it in place, and I booted my computer with Clonezilla CD, and after choosing my resolution I had the lessage “"Loading /live/vmlinuz.."
- I decided to use my recovery Windows CD, I reinstall windows (without driver)
- I tried again to reinstall my clone (to avoid to reinstall all applications, drivers, settings,..), and I had the same message “Loading /live/vmlinuz..". I wait more than 3 hours but nothing happens
Any ideas?
Which "alert message from the bios" did it gave ? (acoustically ?, how many times ?)
Have you made a memory test (your first screen) ?
Have you startet in RAM mode (second screen) ?
Hi Fusi,
I had an alert « bios » message before to change the hard drive each time I launched the PC. But maybe this is a Dell feature, I had the same kind of message when my battery with HS, with the text: “press F1 to continue”
By selecting Memory Test using MemTest86+, I have no problems found.
By selecting Clonezilla Live (800x600) or RAM mode or Safe Graphic mode or Failsafe mode I arrive on a black screen with the message “Loading /live/vmlinuz.." and nothing happen after.
Looks like it's kernel/hardware support issue.
Please try different versions of Clonezilla live, e.g. i686, i386, amd64.
Also, those Ubuntu-based Clonezilla live also give them a try.
Steven.