Hello,
I have been using CloneZilla Live 1.2.1-47 without a problem for awhile now. Today I ran into an issue trying to make an image of a Lenovo T400 Thinkpad laptop. I have always created the image to our network via samba server. Today I got an error part way through making the image. Details are below...
[ 800.528047] CIFS VFS: server not responding
[800.533188] CIFS VFS: no response to cmd 4 mid 36907
[800.538468] CIFS VFS: Send error in close = -11
It did end up finishing the image. I don't know yet if the image is any good because I haven't dropped it back to a T400 yet. I hope it is ok, because we have to drop it to over 100 laptops in less than a week!
I imaged it again and it did the same thing. I don't know if it did it in the same spot though.
Please let me know what this error means and if there is a way to correct it.
Thanks,
Doug
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I tried a third time and it still did it. However, it looked to be at a different time, but real close to the other. It does it around the 35% range. One was 35% and the other time it was 33%. Not sure if this helps.
Also, I took the same pc (T400) and made an image to an external HD without a problem... I did NOT get the error. So, it only creates this error when making the image to the network using a Lenovo T400. I have made several images to the same network without any problems, but they were different model laptops... Still Lenovo, but different model.
Here is what interesting. The image I created where the error happened seems to be ok. I dropped the image to a T400 and the T400 boots up to XP pro without any issues... so far anyway. So, I would like to know for 100% sure that this image is ok.
Any information anyone can provide would be greatly appreciated.
Thanks,
Doug
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I have been using CloneZilla Live 1.2.1-47 without a problem for awhile now. Today I ran into an issue trying to make an image of a Lenovo T400 Thinkpad laptop. I have always created the image to our network via samba server. Today I got an error part way through making the image. Details are below...
[ 800.528047] CIFS VFS: server not responding
[800.533188] CIFS VFS: no response to cmd 4 mid 36907
[800.538468] CIFS VFS: Send error in close = -11
It did end up finishing the image. I don't know yet if the image is any good because I haven't dropped it back to a T400 yet. I hope it is ok, because we have to drop it to over 100 laptops in less than a week!
I imaged it again and it did the same thing. I don't know if it did it in the same spot though.
Please let me know what this error means and if there is a way to correct it.
Thanks,
Doug
Ok, here is an update...
I tried a third time and it still did it. However, it looked to be at a different time, but real close to the other. It does it around the 35% range. One was 35% and the other time it was 33%. Not sure if this helps.
Also, I took the same pc (T400) and made an image to an external HD without a problem... I did NOT get the error. So, it only creates this error when making the image to the network using a Lenovo T400. I have made several images to the same network without any problems, but they were different model laptops... Still Lenovo, but different model.
Here is what interesting. The image I created where the error happened seems to be ok. I dropped the image to a T400 and the T400 boots up to XP pro without any issues... so far anyway. So, I would like to know for 100% sure that this image is ok.
Any information anyone can provide would be greatly appreciated.
Thanks,
Doug
Doug,
Could you please just post your question or problem on one forum ? Not crossing post them.
Let's focus on this one only:
https://sourceforge.net/forum/message.php?msg_id=7322330
Thanks.
Steven.