I used Clonezilla on my previous machine without any issues, but can't get it to boot on my new one.
I can boot from USB and get the first screen, I doesn't seem to matter what I choose VGA mode/fail-safe / VGA 800x / load to RAM.
Either it doesn't continue at all, or it hangs after a short while on the black screen with text.
Motherboard: B75M-D3P
Intel i5-3570K CPU (x64 - so I am using the Clonezilla Live amd64 image, I also tried the i686, both failed the same way)
8GB RAM
BIOS Settings changed from defaults:
Intel Virtualization Enabled (is disabled by default).
Internal graphics : Enabled, 256MB (was set to AUTO with 256MB)
Errors in Clonezilla screen (when it runs):
kvm: disabled in bios.
After this I enabled Intel Virtualization in the BIOS - didn't see this error after that??
drm:arm_pci_agp_init error cannot initialize the agpgart module.
DRM: Fill_in_dev failed
11.738399 platform microcode: firmware : agent aborted loading intel-ucode-06-3a-09 (not found?)
this repeats a few times with different numbers after the 11.
I really hope someone can help me with this.
(( I tried the LIve CD I use on my mom's computer, and although I had to hit CTRL C a few times to make it continue on after errors, and it started the image 3 times after some error messages, but it did make an image in the end. So I think this might not solely be a problem with my new computer after all??))
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I used Clonezilla on my previous machine without any issues, but can't get it to boot on my new one.
I can boot from USB and get the first screen, I doesn't seem to matter what I choose VGA mode/fail-safe / VGA 800x / load to RAM.
Either it doesn't continue at all, or it hangs after a short while on the black screen with text.
Motherboard: B75M-D3P
Intel i5-3570K CPU (x64 - so I am using the Clonezilla Live amd64 image, I also tried the i686, both failed the same way)
8GB RAM
BIOS Settings changed from defaults:
Intel Virtualization Enabled (is disabled by default).
Internal graphics : Enabled, 256MB (was set to AUTO with 256MB)
Errors in Clonezilla screen (when it runs):
kvm: disabled in bios.
After this I enabled Intel Virtualization in the BIOS - didn't see this error after that??
drm:arm_pci_agp_init error cannot initialize the agpgart module.
DRM: Fill_in_dev failed
11.738399 platform microcode: firmware : agent aborted loading intel-ucode-06-3a-09 (not found?)
this repeats a few times with different numbers after the 11.
I really hope someone can help me with this.
(( I tried the LIve CD I use on my mom's computer, and although I had to hit CTRL C a few times to make it continue on after errors, and it started the image 3 times after some error messages, but it did make an image in the end. So I think this might not solely be a problem with my new computer after all??))
Which version of Clonezilla live did you use?
Did you try newer one, like testing release:
20131231-trusty or 2.2.1-19?
Steven.
I tried clonezilla-live-2.2.0-31-amd64, clonezilla-live-2.2.0-31-i686-pae , clonezilla-live-20131125-saucy-amd64 .
Those did not work.
I will try a testing release and something with trusty in the name, thanks!