A HDD-partition formated as NTFS comes up as raw in Clonezilla. Under WIN-7 the HDD ist recognized as NTFS. This behavior startet after I moved the WIN-7 OS to a SSD and then changed the partitions of the HDD a bit.
See the attached screenshots.
I'm looking forward for any hints!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
If you use a SSD install the appropriate driver in Windows before you make 'clonezilla savedisk'.
You can make a look for blkdev.list in your image too.
And with 'gparted live' for /dev/sda1 > information
the first sector should be 2048 (for alignment).
Good luck!
Last edit: Fuchs 2014-09-21
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
A HDD-partition formated as NTFS comes up as raw in Clonezilla. Under WIN-7 the HDD ist recognized as NTFS. This behavior startet after I moved the WIN-7 OS to a SSD and then changed the partitions of the HDD a bit.
See the attached screenshots.
I'm looking forward for any hints!
Look for 'Cloning to slightly smaller target HDD' in 'clonezilla help'.
http://sourceforge.net/p/clonezilla/discussion/Help/thread/266b4a72/?limit=100#c8c6
Is that similarly ?
BTW, your attachments are not readably.
If you use a SSD install the appropriate driver in Windows before you make 'clonezilla savedisk'.
You can make a look for blkdev.list in your image too.
And with 'gparted live' for /dev/sda1 > information
the first sector should be 2048 (for alignment).
Good luck!
Last edit: Fuchs 2014-09-21