Hello,
i like clonezilla and it helped me very much.
But now i get a problem on a server 2008.
I've tried to create an image of one disk, which is on Hardware Raid 1.
But the problem is that after i choose the default mode in clonezilla (i've tried also different modes, x64, x86, run from RAM...) i get this Problem and it dont't stop -> loop error, so i can't get into the menu to create an image.
I've tried it already on different USB Flash Drives and different USB Ports.
So i mean clonezilla was on different USB Flash Drives.
What i have tried too, is to run from Parted Magic, result -> the same problem, here it freeze or stop at the step
"Setting up System Devices"
which is seen here at 1:10 minutes, but i don't get the green "DONE" as in the video: https://www.youtube.com/watch?v=Gzf0lhG44V0&feature=youtu.be&t=70
So my problem is that at the moment i can't create an image of this disk.
Do somebody know why i can't get into the menu?
Best regards
alpha7even
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Looks like it's hardware issue.
Did you try the same USB flash drive on different machine?
If it works well, then the problem might be on the machine you have. It looks to me the disk has some hardware issue.
BTW, you can also try to use the testing Clonezilla live, like 2.4.5-11 or 20160105-xenial.
Steven.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
i like clonezilla and it helped me very much.
But now i get a problem on a server 2008.
I've tried to create an image of one disk, which is on Hardware Raid 1.
But the problem is that after i choose the default mode in clonezilla (i've tried also different modes, x64, x86, run from RAM...) i get this Problem and it dont't stop -> loop error, so i can't get into the menu to create an image.
Here are the pictures:
IMG_20160108_120747.jpg
https://yadi.sk/i/y5732fqHmkbMW
IMG_20160108_113936.jpg
https://yadi.sk/i/FgSNtOYKmkbMU
IMG_20160108_133838.jpg
https://yadi.sk/i/b5KFYX-TmkbMa
I've tried it already on different USB Flash Drives and different USB Ports.
So i mean clonezilla was on different USB Flash Drives.
What i have tried too, is to run from Parted Magic, result -> the same problem, here it freeze or stop at the step
"Setting up System Devices"
which is seen here at 1:10 minutes, but i don't get the green "DONE" as in the video:
https://www.youtube.com/watch?v=Gzf0lhG44V0&feature=youtu.be&t=70
So my problem is that at the moment i can't create an image of this disk.
Do somebody know why i can't get into the menu?
Best regards
alpha7even
Looks like it's hardware issue.
Did you try the same USB flash drive on different machine?
If it works well, then the problem might be on the machine you have. It looks to me the disk has some hardware issue.
BTW, you can also try to use the testing Clonezilla live, like 2.4.5-11 or 20160105-xenial.
Steven.