With the mosaic plug-in is it possible to live next to a picture of PiG (P ictures in G raphics) to view 8 more stations in alternation.
As a signal source can be here all the channels for the current transponder can be used.
A simultaneous playback of two encoded transmitters is not possible.
The station, however this must be decoded by software, which requires a lot of processing power. For this reason, the image is only available in 256 shades of gray (savings YUV color conversion> RGB is as well as memory bandwidth) and can be sent after each jerk resolution and bit rate, more or less.
The first call can video PID in the absence of one or more channels take a little longer, as it automatically tries to identify the missing information.
This is queried briefly on the question, or toggle the channel and the PID.
This process should only take place once per transponder, because this information is stored in the station list, and thus the next time instantly.
The startup of the plugin set TV channel is automatically set when you leave again.
It supports the Itgate models.
**2. Installation Installation**
The files "mosaic.so" and "mosaic.cfg" must be copied via FTP depending on the model in this directory: **/var/tuxbox/plugins**
Now, the mosaic can be called function using the plugin menu entry "Mosaic".
Note: For the error analysis is stored in a logfile "/tmp/mosaic.log" (DEBUG = 1) and problems should be viewed as the first or with posted!
**3. Configuration Configuration**
When you first start the configuration file "mosaic.conf" automatically in "/var/tuxbox/config" is created.
Must have been changed if the default root access "itgate" here are the correct credentials are entered.
**1. General-General**
With the mosaic plug-in is it possible to live next to a picture of PiG (P ictures in G raphics) to view 8 more stations in alternation.
As a signal source can be here all the channels for the current transponder can be used.
A simultaneous playback of two encoded transmitters is not possible.
The station, however this must be decoded by software, which requires a lot of processing power. For this reason, the image is only available in 256 shades of gray (savings YUV color conversion> RGB is as well as memory bandwidth) and can be sent after each jerk resolution and bit rate, more or less.
The first call can video PID in the absence of one or more channels take a little longer, as it automatically tries to identify the missing information.
This is queried briefly on the question, or toggle the channel and the PID.
This process should only take place once per transponder, because this information is stored in the station list, and thus the next time instantly.
The startup of the plugin set TV channel is automatically set when you leave again.
It supports the Itgate models.
**2. Installation Installation**
The files "mosaic.so" and "mosaic.cfg" must be copied via FTP depending on the model in this directory: **/var/tuxbox/plugins**
Now, the mosaic can be called function using the plugin menu entry "Mosaic".
Note: For the error analysis is stored in a logfile "/tmp/mosaic.log" (DEBUG = 1) and problems should be viewed as the first or with posted!
**3. Configuration Configuration**
When you first start the configuration file "mosaic.conf" automatically in "/var/tuxbox/config" is created.
Must have been changed if the default root access "itgate" here are the correct credentials are entered.
**Standard Configuration Standard Configuration**
OFFSET_X = 0 (-50 … +50)
Off_y = 0 (-50 … +50)
TRANSPARENCY = 0 (0 = transparency off, 1 = Transparency)
WEBPORT_INT = 80 (web server port for internal tuner)
WEBUSER_INT = root (web server user for internal tuner)
WEBPASS_INT = itgate (web server password for internal tuner)
LANGUAGE = 0 (0 = English, 1 = German)
DEBUG = 1 (0 = log off, 1 = log in)
DMXBUFFER = 1024 (512. .. 10240KB)
The setting for the shift is stored automatically when you exit unless it was amended.
*(Font:www.dream-multimedia-tv.de)*