Menu
▾
▴
[CIShell-SVN] SF.net SVN: cishell:[924] trunk/templates/org.cishell.templates.wizards/ templates_3.0/static_executable/lib/ant-bin
|
From: <pat...@us...> - 2009-08-14 22:14:48
|
Revision: 924
http://cishell.svn.sourceforge.net/cishell/?rev=924&view=rev
Author: pataphil
Date: 2009-08-14 22:14:40 +0000 (Fri, 14 Aug 2009)
Log Message:
-----------
* Added necessary template files for the static executable wizard. (Oops.)
Added Paths:
-----------
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant.bat
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant.cmd
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun.bat
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun.pl
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antenv.cmd
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/complete-ant-cmd.pl
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/envset.cmd
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/lcp.bat
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runant.pl
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runant.py
trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runrc.cmd
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,299 @@
+#! /bin/sh
+
+# Copyright 2001-2005 The Apache Software Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+# Extract launch and ant arguments, (see details below).
+ant_exec_args=
+no_config=false
+use_jikes_default=false
+ant_exec_debug=false
+show_help=false
+for arg in "$@" ; do
+ if [ "$arg" = "--noconfig" ] ; then
+ no_config=true
+ elif [ "$arg" = "--usejikes" ] ; then
+ use_jikes_default=true
+ elif [ "$arg" = "--execdebug" ] ; then
+ ant_exec_debug=true
+ elif [ my"$arg" = my"--h" -o my"$arg" = my"--help" ] ; then
+ show_help=true
+ ant_exec_args="$ant_exec_args -h"
+ else
+ if [ my"$arg" = my"-h" -o my"$arg" = my"-help" ] ; then
+ show_help=true
+ fi
+ ant_exec_args="$ant_exec_args \"$arg\""
+ fi
+done
+
+# Source/default ant configuration
+if $no_config ; then
+ rpm_mode=false
+ usejikes=$use_jikes_default
+else
+ # load system-wide ant configuration
+ if [ -f "/etc/ant.conf" ] ; then
+ . /etc/ant.conf
+ fi
+
+ # load user ant configuration
+ if [ -f "$HOME/.ant/ant.conf" ] ; then
+ . $HOME/.ant/ant.conf
+ fi
+ if [ -f "$HOME/.antrc" ] ; then
+ . "$HOME/.antrc"
+ fi
+
+ # provide default configuration values
+ if [ -z "$rpm_mode" ] ; then
+ rpm_mode=false
+ fi
+ if [ -z "$usejikes" ] ; then
+ usejikes=$use_jikes_default
+ fi
+fi
+
+# Setup Java environment in rpm mode
+if $rpm_mode ; then
+ if [ -f /usr/share/java-utils/java-functions ] ; then
+ . /usr/share/java-utils/java-functions
+ set_jvm
+ set_javacmd
+ fi
+fi
+
+# OS specific support. $var _must_ be set to either true or false.
+cygwin=false;
+darwin=false;
+case "`uname`" in
+ CYGWIN*) cygwin=true ;;
+ Darwin*) darwin=true
+ if [ -z "$JAVA_HOME" ] ; then
+ JAVA_HOME=/System/Library/Frameworks/JavaVM.framework/Home
+ fi
+ ;;
+esac
+
+if [ -z "$ANT_HOME" -o ! -d "$ANT_HOME" ] ; then
+ ## resolve links - $0 may be a link to ant's home
+ PRG="$0"
+ progname=`basename "$0"`
+
+ # need this for relative symlinks
+ while [ -h "$PRG" ] ; do
+ ls=`ls -ld "$PRG"`
+ link=`expr "$ls" : '.*-> \(.*\)$'`
+ if expr "$link" : '/.*' > /dev/null; then
+ PRG="$link"
+ else
+ PRG=`dirname "$PRG"`"/$link"
+ fi
+ done
+
+ ANT_HOME=`dirname "$PRG"`/..
+
+ # make it fully qualified
+ ANT_HOME=`cd "$ANT_HOME" && pwd`
+fi
+
+# For Cygwin, ensure paths are in UNIX format before anything is touched
+if $cygwin ; then
+ [ -n "$ANT_HOME" ] &&
+ ANT_HOME=`cygpath --unix "$ANT_HOME"`
+ [ -n "$JAVA_HOME" ] &&
+ JAVA_HOME=`cygpath --unix "$JAVA_HOME"`
+fi
+
+# set ANT_LIB location
+ANT_LIB="${ANT_HOME}/lib"
+
+if [ -z "$JAVACMD" ] ; then
+ if [ -n "$JAVA_HOME" ] ; then
+ if [ -x "$JAVA_HOME/jre/sh/java" ] ; then
+ # IBM's JDK on AIX uses strange locations for the executables
+ JAVACMD="$JAVA_HOME/jre/sh/java"
+ else
+ JAVACMD="$JAVA_HOME/bin/java"
+ fi
+ else
+ JAVACMD=`which java 2> /dev/null `
+ if [ -z "$JAVACMD" ] ; then
+ JAVACMD=java
+ fi
+ fi
+fi
+
+if [ ! -x "$JAVACMD" ] ; then
+ echo "Error: JAVA_HOME is not defined correctly."
+ echo " We cannot execute $JAVACMD"
+ exit 1
+fi
+
+# Build local classpath using just the launcher in non-rpm mode or
+# use the Jpackage helper in rpm mode with basic and default jars
+# specified in the ant.conf configuration. Because the launcher is
+# used, libraries linked in ANT_HOME will also be include, but this
+# is discouraged as it is not java-version safe. A user should
+# request optional jars and their dependencies via the OPT_JAR_LIST
+# variable
+if $rpm_mode && [ -f /usr/bin/build-classpath ] ; then
+ LOCALCLASSPATH="$(/usr/bin/build-classpath ant ant-launcher jaxp_parser_impl xml-commons-apis)"
+ # If the user requested to try to add some other jars to the classpath
+ if [ -n "$OPT_JAR_LIST" ] ; then
+ _OPTCLASSPATH="$(/usr/bin/build-classpath $OPT_JAR_LIST 2> /dev/null)"
+ if [ -n "$_OPTCLASSPATH" ] ; then
+ LOCALCLASSPATH="$LOCALCLASSPATH:$_OPTCLASSPATH"
+ fi
+ fi
+
+ # Explicitly add javac path to classpath, assume JAVA_HOME set
+ # properly in rpm mode
+ if [ -f "$JAVA_HOME/lib/tools.jar" ] ; then
+ LOCALCLASSPATH="$LOCALCLASSPATH:$JAVA_HOME/lib/tools.jar"
+ fi
+ if [ -f "$JAVA_HOME/lib/classes.zip" ] ; then
+ LOCALCLASSPATH="$LOCALCLASSPATH:$JAVA_HOME/lib/classes.zip"
+ fi
+
+ # if CLASSPATH_OVERRIDE env var is set, LOCALCLASSPATH will be
+ # user CLASSPATH first and ant-found jars after.
+ # In that case, the user CLASSPATH will override ant-found jars
+ #
+ # if CLASSPATH_OVERRIDE is not set, we'll have the normal behaviour
+ # with ant-found jars first and user CLASSPATH after
+ if [ -n "$CLASSPATH" ] ; then
+ # merge local and specified classpath
+ if [ -z "$LOCALCLASSPATH" ] ; then
+ LOCALCLASSPATH="$CLASSPATH"
+ elif [ -n "$CLASSPATH_OVERRIDE" ] ; then
+ LOCALCLASSPATH="$CLASSPATH:$LOCALCLASSPATH"
+ else
+ LOCALCLASSPATH="$LOCALCLASSPATH:$CLASSPATH"
+ fi
+
+ # remove class path from launcher -cp option
+ CLASSPATH=""
+ fi
+else
+ # not using rpm_mode; use launcher to determine classpaths
+ if [ -z "$LOCALCLASSPATH" ] ; then
+ LOCALCLASSPATH=$ANT_LIB/ant-launcher.jar
+ else
+ LOCALCLASSPATH=$ANT_LIB/ant-launcher.jar:$LOCALCLASSPATH
+ fi
+fi
+
+if [ -n "$JAVA_HOME" ] ; then
+ # OSX hack to make Ant work with jikes
+ if $darwin ; then
+ OSXHACK="${JAVA_HOME}/../Classes"
+ if [ -d "${OSXHACK}" ] ; then
+ for i in "${OSXHACK}"/*.jar
+ do
+ JIKESPATH="$JIKESPATH:$i"
+ done
+ fi
+ fi
+fi
+
+# Allow Jikes support (off by default)
+if $usejikes; then
+ ANT_OPTS="$ANT_OPTS -Dbuild.compiler=jikes"
+fi
+
+# For Cygwin, switch paths to appropriate format before running java
+# For PATHs convert to unix format first, then to windows format to ensure
+# both formats are supported. Probably this will fail on directories with ;
+# in the name in the path. Let's assume that paths containing ; are more
+# rare than windows style paths on cygwin.
+if $cygwin; then
+ if [ "$OS" = "Windows_NT" ] && cygpath -m .>/dev/null 2>/dev/null ; then
+ format=mixed
+ else
+ format=windows
+ fi
+ ANT_HOME=`cygpath --$format "$ANT_HOME"`
+ ANT_LIB=`cygpath --$format "$ANT_LIB"`
+ JAVA_HOME=`cygpath --$format "$JAVA_HOME"`
+ LCP_TEMP=`cygpath --path --unix "$LOCALCLASSPATH"`
+ LOCALCLASSPATH=`cygpath --path --$format "$LCP_TEMP"`
+ if [ -n "$CLASSPATH" ] ; then
+ CP_TEMP=`cygpath --path --unix "$CLASSPATH"`
+ CLASSPATH=`cygpath --path --$format "$CP_TEMP"`
+ fi
+ CYGHOME=`cygpath --$format "$HOME"`
+fi
+
+# Show script help if requested
+if $show_help ; then
+ echo $0 '[script options] [options] [target [target2 [target3] ..]]'
+ echo 'Script Options:'
+ echo ' --help, --h print this message and ant help'
+ echo ' --noconfig suppress sourcing of /etc/ant.conf,'
+ echo ' $HOME/.ant/ant.conf, and $HOME/.antrc'
+ echo ' configuration files'
+ echo ' --usejikes enable use of jikes by default, unless'
+ echo ' set explicitly in configuration files'
+ echo ' --execdebug print ant exec line generated by this'
+ echo ' launch script'
+ echo ' '
+fi
+# add a second backslash to variables terminated by a backslash under cygwin
+if $cygwin; then
+ case "$ANT_HOME" in
+ *\\ )
+ ANT_HOME="$ANT_HOME\\"
+ ;;
+ esac
+ case "$CYGHOME" in
+ *\\ )
+ CYGHOME="$CYGHOME\\"
+ ;;
+ esac
+ case "$JIKESPATH" in
+ *\\ )
+ JIKESPATH="$JIKESPATH\\"
+ ;;
+ esac
+ case "$LOCALCLASSPATH" in
+ *\\ )
+ LOCALCLASSPATH="$LOCALCLASSPATH\\"
+ ;;
+ esac
+ case "$CLASSPATH" in
+ *\\ )
+ CLASSPATH="$CLASSPATH\\"
+ ;;
+ esac
+fi
+# Execute ant using eval/exec to preserve spaces in paths,
+# java options, and ant args
+ant_sys_opts=
+if [ -n "$CYGHOME" ]; then
+ if [ -n "$JIKESPATH" ]; then
+ ant_sys_opts="-Djikes.class.path=\"$JIKESPATH\" -Dcygwin.user.home=\"$CYGHOME\""
+ else
+ ant_sys_opts="-Dcygwin.user.home=\"$CYGHOME\""
+ fi
+else
+ if [ -n "$JIKESPATH" ]; then
+ ant_sys_opts="-Djikes.class.path=\"$JIKESPATH\""
+ fi
+fi
+ant_exec_command="exec \"$JAVACMD\" $ANT_OPTS -classpath \"$LOCALCLASSPATH\" -Dant.home=\"$ANT_HOME\" -Dant.library.dir=\"$ANT_LIB\" $ant_sys_opts org.apache.tools.ant.launch.Launcher $ANT_ARGS -cp \"$CLASSPATH\" $ant_exec_args"
+if $ant_exec_debug ; then
+ echo $ant_exec_command
+fi
+eval $ant_exec_command
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant.bat
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant.bat (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant.bat 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,126 @@
+@echo off
+
+REM Copyright 2001,2004-2005 The Apache Software Foundation
+REM
+REM Licensed under the Apache License, Version 2.0 (the "License");
+REM you may not use this file except in compliance with the License.
+REM You may obtain a copy of the License at
+REM
+REM http://www.apache.org/licenses/LICENSE-2.0
+REM
+REM Unless required by applicable law or agreed to in writing, software
+REM distributed under the License is distributed on an "AS IS" BASIS,
+REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+REM See the License for the specific language governing permissions and
+REM limitations under the License.
+
+if exist "%HOME%\antrc_pre.bat" call "%HOME%\antrc_pre.bat"
+
+if "%OS%"=="Windows_NT" @setlocal
+if "%OS%"=="WINNT" @setlocal
+
+rem %~dp0 is expanded pathname of the current script under NT
+set DEFAULT_ANT_HOME=%~dp0..
+
+if "%ANT_HOME%"=="" set ANT_HOME=%DEFAULT_ANT_HOME%
+set DEFAULT_ANT_HOME=
+
+set _USE_CLASSPATH=yes
+
+rem Slurp the command line arguments. This loop allows for an unlimited number
+rem of arguments (up to the command line limit, anyway).
+set ANT_CMD_LINE_ARGS=%1
+if ""%1""=="""" goto doneStart
+shift
+:setupArgs
+if ""%1""=="""" goto doneStart
+if ""%1""==""-noclasspath"" goto clearclasspath
+set ANT_CMD_LINE_ARGS=%ANT_CMD_LINE_ARGS% %1
+shift
+goto setupArgs
+
+rem here is there is a -noclasspath in the options
+:clearclasspath
+set _USE_CLASSPATH=no
+shift
+goto setupArgs
+
+rem This label provides a place for the argument list loop to break out
+rem and for NT handling to skip to.
+
+:doneStart
+rem find ANT_HOME if it does not exist due to either an invalid value passed
+rem by the user or the %0 problem on Windows 9x
+if exist "%ANT_HOME%\lib\ant.jar" goto checkJava
+
+rem check for ant in Program Files
+if not exist "%ProgramFiles%\ant" goto checkSystemDrive
+set ANT_HOME=%ProgramFiles%\ant
+goto checkJava
+
+:checkSystemDrive
+rem check for ant in root directory of system drive
+if not exist %SystemDrive%\ant\lib\ant.jar goto checkCDrive
+set ANT_HOME=%SystemDrive%\ant
+goto checkJava
+
+:checkCDrive
+rem check for ant in C:\ant for Win9X users
+if not exist C:\ant\lib\ant.jar goto noAntHome
+set ANT_HOME=C:\ant
+goto checkJava
+
+:noAntHome
+echo ANT_HOME is set incorrectly or ant could not be located. Please set ANT_HOME.
+goto end
+
+:checkJava
+set _JAVACMD=%JAVACMD%
+
+if "%JAVA_HOME%" == "" goto noJavaHome
+if not exist "%JAVA_HOME%\bin\java.exe" goto noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=%JAVA_HOME%\bin\java.exe
+goto checkJikes
+
+:noJavaHome
+if "%_JAVACMD%" == "" set _JAVACMD=java.exe
+
+:checkJikes
+if not "%JIKESPATH%"=="" goto runAntWithJikes
+
+:runAnt
+if "%_USE_CLASSPATH%"=="no" goto runAntNoClasspath
+if not "%CLASSPATH%"=="" goto runAntWithClasspath
+"%_JAVACMD%" %ANT_OPTS% -classpath "%ANT_HOME%\lib\ant-launcher.jar" "-Dant.home=%ANT_HOME%" org.apache.tools.ant.launch.Launcher %ANT_ARGS% %ANT_CMD_LINE_ARGS%
+goto end
+
+:runAntNoClasspath
+"%_JAVACMD%" %ANT_OPTS% -classpath "%ANT_HOME%\lib\ant-launcher.jar" "-Dant.home=%ANT_HOME%" org.apache.tools.ant.launch.Launcher %ANT_ARGS% %ANT_CMD_LINE_ARGS%
+goto end
+
+:runAntWithClasspath
+"%_JAVACMD%" %ANT_OPTS% -classpath "%ANT_HOME%\lib\ant-launcher.jar" "-Dant.home=%ANT_HOME%" org.apache.tools.ant.launch.Launcher %ANT_ARGS% -cp "%CLASSPATH%" %ANT_CMD_LINE_ARGS%
+goto end
+
+:runAntWithJikes
+if "%_USE_CLASSPATH%"=="no" goto runAntWithJikesNoClasspath
+if not "%CLASSPATH%"=="" goto runAntWithJikesAndClasspath
+
+:runAntWithJikesNoClasspath
+"%_JAVACMD%" %ANT_OPTS% -classpath "%ANT_HOME%\lib\ant-launcher.jar" "-Dant.home=%ANT_HOME%" "-Djikes.class.path=%JIKESPATH%" org.apache.tools.ant.launch.Launcher %ANT_ARGS% %ANT_CMD_LINE_ARGS%
+goto end
+
+:runAntWithJikesAndClasspath
+"%_JAVACMD%" %ANT_OPTS% -classpath "%ANT_HOME%\lib\ant-launcher.jar" "-Dant.home=%ANT_HOME%" "-Djikes.class.path=%JIKESPATH%" org.apache.tools.ant.launch.Launcher %ANT_ARGS% -cp "%CLASSPATH%" %ANT_CMD_LINE_ARGS%
+goto end
+
+:end
+set _JAVACMD=
+set ANT_CMD_LINE_ARGS=
+
+if "%OS%"=="Windows_NT" @endlocal
+if "%OS%"=="WINNT" @endlocal
+
+:mainEnd
+if exist "%HOME%\antrc_post.bat" call "%HOME%\antrc_post.bat"
+
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant.cmd
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant.cmd (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/ant.cmd 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,92 @@
+/*
+ Copyright 2003-2004 The Apache Software Foundation
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ Run ant
+*/
+
+'@echo off'
+parse arg mode envarg '::' antarg
+
+if mode\='.' & mode\='..' & mode\='/' then do
+ envarg = mode envarg
+ mode = ''
+end
+
+if antarg = '' then do
+ antarg = envarg
+ envarg = ''
+end
+
+x = setlocal()
+
+env="OS2ENVIRONMENT"
+antenv = _getenv_('antenv')
+if _testenv_() = 0 then interpret 'call "' || antenv || '"' '"' || envarg || '"'
+
+if mode = '' then mode = _getenv_('ANT_MODE' '..')
+if mode \= '/' then do
+ runrc = _getenv_('runrc')
+ antrc = _getenv_('antrc' 'antrc.cmd')
+ if mode = '..' then mode = '-r'
+ else mode = ''
+ interpret 'call "' || runrc || '"' antrc '"' || mode || '"'
+end
+
+if _testenv_() = 0 then do
+ say 'Ant environment is not set properly'
+ x = endlocal()
+ exit 16
+end
+
+settings = '-Dant.home=' || ANT_HOME '-Djava.home=' || JAVA_HOME
+
+java = _getenv_('javacmd' 'java')
+opts = value('ANT_OPTS',,env)
+args = value('ANT_ARGS',,env)
+lcp = value('LOCALCLASSPATH',,env)
+cp = value('CLASSPATH',,env)
+if value('ANT_USE_CP',,env) \= '' then do
+ if lcp \= '' & right(lcp, 1) \= ';' then lcp = lcp || ';'
+ lcp = lcp || cp
+ 'SET CLASSPATH='
+end
+if lcp\='' then lcp = '-classpath' lcp
+
+cmd = java opts lcp '-jar' ANT_HOME ||'\lib\ant-launcher.jar' settings args antarg
+launcher = stream(ANT_HOME ||'\lib\ant-launcher.jar', 'C', 'query exists')
+if launcher = '' then entry = 'org.apache.tools.ant.Main'
+else entry = 'org.apache.tools.ant.launch.Launcher'
+java opts lcp entry settings args antarg
+
+x = endlocal()
+
+return rc
+
+_testenv_: procedure expose env ANT_HOME JAVA_HOME
+ANT_HOME = value('ANT_HOME',,env)
+if ANT_HOME = '' then return 0
+JAVA_HOME = value('JAVA_HOME',,env)
+if JAVA_HOME = '' then return 0
+cp = translate(value('CLASSPATH',,env))
+if pos(translate(ANT_HOME), cp) = 0 then return 0
+if pos(translate(JAVA_HOME), cp) = 0 then return 0
+return 1
+
+_getenv_: procedure expose env
+parse arg envar default
+if default = '' then default = envar
+var = value(translate(envar),,env)
+if var = '' then var = default
+return var
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,26 @@
+#!/bin/sh
+
+#
+# Copyright 2001-2002,2004 The Apache Software Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+
+# Args: DIR command
+cd "$1"
+CMD="$2"
+shift
+shift
+
+exec "$CMD" "$@"
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun.bat
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun.bat (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun.bat 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,47 @@
+@echo off
+
+REM
+REM Copyright 2001-2002,2004-2005 The Apache Software Foundation
+REM
+REM Licensed under the Apache License, Version 2.0 (the "License");
+REM you may not use this file except in compliance with the License.
+REM You may obtain a copy of the License at
+REM
+REM http://www.apache.org/licenses/LICENSE-2.0
+REM
+REM Unless required by applicable law or agreed to in writing, software
+REM distributed under the License is distributed on an "AS IS" BASIS,
+REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+REM See the License for the specific language governing permissions and
+REM limitations under the License.
+REM
+REM
+
+if "%OS%"=="Windows_NT" @setlocal
+if "%OS%"=="WINNT" @setlocal
+
+if ""%1""=="""" goto runCommand
+
+rem Change drive and directory to %1
+if "%OS%"=="Windows_NT" cd /d ""%1""
+if not "%OS%"=="Windows_NT" cd ""%1""
+shift
+
+rem Slurp the command line arguments. This loop allows for an unlimited number
+rem of agruments (up to the command line limit, anyway).
+set ANT_RUN_CMD=%1
+if ""%1""=="""" goto runCommand
+shift
+:loop
+if ""%1""=="""" goto runCommand
+set ANT_RUN_CMD=%ANT_RUN_CMD% %1
+shift
+goto loop
+
+:runCommand
+rem echo %ANT_RUN_CMD%
+%ANT_RUN_CMD%
+
+if "%OS%"=="Windows_NT" @endlocal
+if "%OS%"=="WINNT" @endlocal
+
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun.pl
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun.pl (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antRun.pl 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,65 @@
+#!/usr/bin/perl
+#
+# Copyright 2001,2003-2004 The Apache Software Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#######################################################################
+#
+# antRun.pl
+#
+# wrapper script for invoking commands on a platform with Perl installed
+# this is akin to antRun.bat, and antRun the SH script
+#
+# created: 2001-10-18
+# author: Jeff Tulley jt...@no...
+#######################################################################
+#be fussy about variables
+use strict;
+
+#turn warnings on during dev; generates a few spurious uninitialised var access warnings
+#use warnings;
+
+#and set $debug to 1 to turn on trace info (currently unused)
+my $debug=1;
+
+#######################################################################
+# change drive and directory to "%1"
+my $ANT_RUN_CMD = @ARGV[0];
+
+# assign current run command to "%2"
+chdir (@ARGV[0]) || die "Can't cd to $ARGV[0]: $!\n";
+if ($^O eq "NetWare") {
+ # There is a bug in Perl 5 on NetWare, where chdir does not
+ # do anything. On NetWare, the following path-prefixed form should
+ # always work. (afaict)
+ $ANT_RUN_CMD .= "/".@ARGV[1];
+}
+else {
+ $ANT_RUN_CMD = @ARGV[1];
+}
+
+# dispose of the first two arguments, leaving only the command's args.
+shift;
+shift;
+
+# run the command
+my $returnValue = system $ANT_RUN_CMD, @ARGV;
+if ($returnValue eq 0) {
+ exit 0;
+}
+else {
+ # only 0 and 1 are widely recognized as exit values
+ # so change the exit value to 1
+ exit 1;
+}
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antenv.cmd
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antenv.cmd (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/antenv.cmd 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,99 @@
+/*
+ Copyright 2003-2004 The Apache Software Foundation
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ Ant environment
+*/
+
+'@echo off'
+call RxFuncAdd "SysLoadFuncs", "RexxUtil", "SysLoadFuncs"
+call SysLoadFuncs
+
+/* Prepare the parameters for later use */
+parse arg argv
+mode = ''
+args = ''
+opts = ''
+cp = ''
+lcp = ''
+
+do i = 1 to words(argv)
+ param = word(argv, i)
+ select
+ when param='-lcp' then mode = 'l'
+ when param='-cp' | param='-classpath' then mode = 'c'
+ when abbrev('-opts', param, 4) then mode = 'o'
+ when abbrev('-args', param, 4) then mode = 'a'
+ otherwise
+ select
+ when mode = 'a' then args = space(args param, 1)
+ when mode = 'c' then cp = space(cp param, 1)
+ when mode = 'l' then lcp = space(lcp param, 1)
+ when mode = 'o' then opts = space(opts param, 1)
+ otherwise
+ say 'Option' param 'ignored'
+ end
+ end
+end
+
+env="OS2ENVIRONMENT"
+antconf = _getenv_('antconf' 'antconf.cmd')
+runrc = _getenv_('runrc')
+interpret 'call "' || runrc || '"' '"' || antconf || '"' 'ETC'
+ANT_HOME = value('ANT_HOME',,env)
+JAVA_HOME = value('JAVA_HOME',,env)
+classpath = value('CLASSPATH',,env)
+classes = stream(JAVA_HOME || "\lib\classes.zip", "C", "QUERY EXISTS")
+if classes \= '' then classpath = prepend(classpath classes)
+classes = stream(JAVA_HOME || "\lib\tools.jar", "C", "QUERY EXISTS")
+if classes \= '' then classpath = prepend(classpath classes)
+
+classpath = prepend(classpath ANT_HOME || '\lib\ant-launcher.jar')
+'SET CLASSPATH=' || classpath
+
+/* Setting classpathes, options and arguments */
+envset = _getenv_('envset')
+if cp\='' then interpret 'call "' || envset || '"' '"; CLASSPATH"' '"' || cp || '"'
+if lcp\='' then interpret 'call "' || envset || '"' '"; LOCALCLASSPATH"' '"' || lcp || '"'
+if opts\='' then interpret 'call "' || envset || '"' '"-D ANT_OPTS"' '"' || opts || '"'
+if args\='' then interpret 'call "' || envset || '"' '"ANT_ARGS"' '"' || args || '"'
+
+exit 0
+
+addpath: procedure
+parse arg path elem
+if elem = '' then do
+ if path\='' & right(path, 1)\=';' then path = path || ';'
+ return path
+end
+if substr(path, length(path)) = ';' then glue = ''
+else glue = ';'
+if pos(translate(elem), translate(path)) = 0 then path = path || glue || elem || ';'
+return path
+
+prepend: procedure
+parse arg path elem
+if elem = '' then do
+ if path\='' & right(path, 1)\=';' then path = path || ';'
+ return path
+end
+if pos(translate(elem), translate(path)) = 0 then path = elem || ';' || path
+return path
+
+_getenv_: procedure expose env
+parse arg envar default
+if default = '' then default = envar
+var = value(translate(envar),,env)
+if var = '' then var = default
+return var
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/complete-ant-cmd.pl
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/complete-ant-cmd.pl (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/complete-ant-cmd.pl 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,113 @@
+#!/usr/bin/perl
+#
+# Copyright 2001,2004 The Apache Software Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# A script to allow Bash or Z-Shell to complete an Ant command-line.
+#
+# To install for Bash 2.0 or better, add the following to ~/.bashrc:
+#
+# $ complete -C complete-ant-cmd ant build.sh
+#
+# To install for Z-Shell 2.5 or better, add the following to ~/.zshrc:
+#
+# function ant_complete () {
+# local args_line args
+# read -l args_line
+# set -A args $args_line
+# set -A reply $(COMP_LINE=$args_line complete-ant-cmd ${args[1]} $1)
+# }
+# compctl -K ant_complete ant build.sh
+#
+# @author Mike Williams <mi...@co...>
+
+my $cmdLine = $ENV{'COMP_LINE'};
+my $antCmd = $ARGV[0];
+my $word = $ARGV[1];
+
+my @completions;
+if ($word =~ /^-/) {
+ list( restrict( $word, getArguments() ));
+} elsif ($cmdLine =~ /-(f|buildfile)\s+\S*$/) {
+ list( getBuildFiles($word) );
+} else {
+ list( restrict( $word, getTargets() ));
+}
+
+exit(0);
+
+sub list {
+ for (@_) {
+ print "$_\n";
+ }
+}
+
+sub restrict {
+ my ($word, @completions) = @_;
+ grep( /^\Q$word\E/, @completions );
+}
+
+sub getArguments {
+ qw(-buildfile -debug -emacs -f -find -help -listener -logfile
+ -logger -projecthelp -quiet -verbose -version);
+}
+
+
+sub getBuildFiles {
+ my ($word) = @_;
+ grep( /\.xml$/, glob( "$word*" ));
+}
+
+sub getTargets {
+
+ # Look for build-file
+ my $buildFile = 'build.xml';
+ if ($cmdLine =~ /-(f|buildfile)\s+(\S+)/) {
+ $buildFile = $2;
+ }
+ return () unless (-f $buildFile);
+
+ # Run "ant -projecthelp" to list targets. Keep a cache of results in a
+ # cache-file.
+ my $cacheFile = $buildFile;
+ $cacheFile =~ s|(.*/)?(.*)|${1}.ant-targets-${2}|;
+ if ((!-e $cacheFile) || (-M $buildFile) < (-M $cacheFile)) {
+ open( CACHE, '>'.$cacheFile ) || die "can\'t write $cacheFile: $!\n";
+ open( HELP, "$antCmd -projecthelp -f '$buildFile'|" ) || return();
+ my %targets;
+ while( <HELP> ) {
+ if (/^\s+(\S+)/) {
+ $targets{$1}++;
+ }
+ }
+ my @targets = sort keys %targets;
+ for (@targets) { print CACHE "$_\n"; }
+ return @targets;
+ }
+
+ # Read the target-cache
+ open( CACHE, $cacheFile ) || die "can\'t read $cacheFile: $!\n";
+ my @targets;
+ while (<CACHE>) {
+ chop;
+ s/\r$//; # for Cygwin
+ push( @targets, $_ );
+ }
+ close( CACHE );
+ @targets;
+
+}
+
+
+
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/envset.cmd
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/envset.cmd (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/envset.cmd 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,130 @@
+/*
+
+ Copyright 2003-2004 The Apache Software Foundation
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+SET environment variables
+First optional parameter:
+ ; parameters are considered parts of a path variable, semicolons are
+ appended to each element if not already present
+ -D parameters are properties for Java or Makefile etc., -D will be
+ prepended and the parameters will be separated by a space
+ =D the same as above but equal sign is not required
+ , parameters should be comma separated in the environment variable
+ - parameters should be separated by the next parameter
+ Other values mean that the first parameter is missing and the environment
+ variable will be set to the space separated parameters
+
+Second parameter: name of the environment variable
+
+Next parameters: values
+; implies that the equal sign is considered a part of the parameter and is
+not interpreted
+
+-D requires parameters in the form name=value. If the equal sign is not found,
+the parameters are changed to name=expanded_name
+
+Other options have optional equal sign. If it is found, only the part after
+the equal sign will be oprionally expanded.
+
+If the parameter is the minus sign, the next parameter will not be expanded.
+If the parameter is a single dot, it will be replaced with the value of the
+environment variable as it existed before envset was invoked.
+
+For other parameters the batch looks for the environment variable with the
+same name (in uppercase). If it is found, it forms the expanded_name. If
+the environment variable with such a name does not exist, the expanded_name
+will hold the parameter name without case conversion.
+*/
+
+parse arg mode envar args
+
+equal = 0
+sep = ' '
+
+/* Parse command line parameters */
+select
+ when mode='-' then do
+ sep = envar
+ parse var args envar args
+ end
+ when mode=';' then do
+ sep = ''
+ equal = -1
+ end
+ when mode='-D' then equal = 1
+ when mode='=D' then mode = '-D'
+ when mode=',' then sep = ','
+otherwise
+ args = envar args
+ envar = mode
+ mode = ''
+end
+
+env = 'OS2ENVIRONMENT'
+envar = translate(envar)
+orig = value(envar,,env)
+newval = ''
+expand = 1
+
+/* for each parameter... */
+do i = 1 to words(args)
+ if expand > 0 & word(args, i) = '-' then expand = 0
+ else call addval word(args, i)
+end
+
+/* Optionally enclose path variable by quotes */
+if mode = ';' & pos(' ', newval) > 0 then newval = '"' || newval || '"'
+
+/* Set the new value, 'SET' cannot be used since it does not allow '=' */
+x = value(envar, newval, env)
+exit 0
+
+addval: procedure expose sep equal orig expand newval mode env
+parse arg var
+
+if var = '.' then expvar = orig
+else do
+ if equal >= 0 then do
+ parse var var name '=' val
+ if val = '' then var = name
+ else var = val
+ end
+ if expand = 0 then expvar = var
+ else expvar = value(translate(var),,env)
+ if expvar = '' then expvar = var
+ if equal >= 0 then do
+ if val = '' then do
+ parse var expvar key '=' val
+ if val <> '' then name = key
+ else do
+ if equal > 0 then val = key
+ else name = key
+ end
+ end
+ else val = expvar
+ if pos(' ', val) > 0 | pos('=', val) > 0 then val = '"' || val || '"'
+ if val = '' then expvar = name
+ else expvar = name || '=' || val
+ end
+ if mode = '-D' then expvar = '-D' || expvar
+ if mode = ';' then do
+ if right(expvar, 1) <> ';' then expvar = expvar || ';'
+ end
+end
+
+if newval = '' then newval = expvar
+else newval = newval || sep || expvar
+expand = 1
+return
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/lcp.bat
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/lcp.bat (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/lcp.bat 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,30 @@
+REM
+REM Copyright 2001-2004 The Apache Software Foundation
+REM
+REM Licensed under the Apache License, Version 2.0 (the "License");
+REM you may not use this file except in compliance with the License.
+REM You may obtain a copy of the License at
+REM
+REM http://www.apache.org/licenses/LICENSE-2.0
+REM
+REM Unless required by applicable law or agreed to in writing, software
+REM distributed under the License is distributed on an "AS IS" BASIS,
+REM WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+REM See the License for the specific language governing permissions and
+REM limitations under the License.
+REM
+REM
+
+set _CLASSPATHCOMPONENT=%1
+if ""%1""=="""" goto gotAllArgs
+shift
+
+:argCheck
+if ""%1""=="""" goto gotAllArgs
+set _CLASSPATHCOMPONENT=%_CLASSPATHCOMPONENT% %1
+shift
+goto argCheck
+
+:gotAllArgs
+set LOCALCLASSPATH=%_CLASSPATHCOMPONENT%;%LOCALCLASSPATH%
+
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runant.pl
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runant.pl (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runant.pl 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,152 @@
+#!/usr/bin/perl
+#
+# Copyright 2000-2004 The Apache Software Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#######################################################################
+#
+# runant.pl
+#
+# wrapper script for invoking ant in a platform with Perl installed
+# this may include cgi-bin invocation, which is considered somewhat daft.
+# (slo: that should be a separate file which can be derived from this
+# and returns the XML formatted output)
+#
+# the code is not totally portable due to classpath and directory splitting
+# issues. oops. (NB, use File::Spec::Functions will help and the code is
+# structured for the catfile() call, but because of perl version funnies
+# the code is not included.
+#
+# created: 2000-8-24
+# author: Steve Loughran st...@so...
+#######################################################################
+#
+# Assumptions:
+#
+# - the "java" executable/script is on the command path
+# - ANT_HOME has been set
+# - target platform uses ":" as classpath separator or perl indicates it is dos/win32
+# - target platform uses "/" as directory separator.
+
+#be fussy about variables
+use strict;
+
+#platform specifics (disabled)
+#use File::Spec::Functions;
+
+#turn warnings on during dev; generates a few spurious uninitialised var access warnings
+#use warnings;
+
+#and set $debug to 1 to turn on trace info
+my $debug=1;
+
+#######################################################################
+#
+# check to make sure environment is setup
+#
+
+my $HOME = $ENV{ANT_HOME};
+if ($HOME eq "")
+ {
+ die "\n\nANT_HOME *MUST* be set!\n\n";
+ }
+
+my $JAVACMD = $ENV{JAVACMD};
+$JAVACMD = "java" if $JAVACMD eq "";
+
+my $onnetware = 0;
+if ($^O eq "NetWare")
+{
+ $onnetware = 1;
+}
+
+my $oncygwin = ($^O eq "cygwin");
+
+#ISSUE: what java wants to split up classpath varies from platform to platform
+#and perl is not too hot at hinting which box it is on.
+#here I assume ":" 'cept on win32, dos, and netware. Add extra tests here as needed.
+my $s=":";
+if(($^O eq "MSWin32") || ($^O eq "dos") || ($^O eq "cygwin") ||
+ ($onnetware == 1))
+ {
+ $s=";";
+ }
+
+#build up standard classpath
+my $localpath = "$HOME/lib/ant-launcher.jar";
+#set JVM options and Ant arguments, if any
+my @ANT_OPTS=split(" ", $ENV{ANT_OPTS});
+my @ANT_ARGS=split(" ", $ENV{ANT_ARGS});
+
+#jikes
+if($ENV{JIKESPATH} ne "")
+ {
+ push @ANT_OPTS, "-Djikes.class.path=$ENV{JIKESPATH}";
+ }
+
+#construct arguments to java
+my @ARGS;
+push @ARGS, @ANT_OPTS;
+
+my $CYGHOME = "";
+
+my $classpath=$ENV{CLASSPATH};
+if ($oncygwin == 1) {
+ $localpath = `cygpath --path --windows $localpath`;
+ chomp ($localpath);
+ if (! $classpath eq "")
+ {
+ $classpath = `cygpath --path --windows "$classpath"`;
+ chomp ($classpath);
+ }
+ $HOME = `cygpath --path --windows $HOME`;
+ chomp ($HOME);
+ $CYGHOME = `cygpath --path --windows $ENV{HOME}`;
+ chomp ($CYGHOME);
+}
+push @ARGS, "-classpath", "$localpath";
+push @ARGS, "-Dant.home=$HOME";
+if ( ! $CYGHOME eq "" )
+{
+ push @ARGS, "-Dcygwin.user.home=\"$CYGHOME\""
+}
+push @ARGS, "org.apache.tools.ant.launch.Launcher", @ANT_ARGS;
+push @ARGS, @ARGV;
+if (! $classpath eq "")
+{
+ if ($onnetware == 1)
+ {
+ # make classpath literally $CLASSPATH
+ # this is to avoid pushing us over the 512 character limit
+ # even skip the ; - that is already in $localpath
+ push @ARGS, "-lib", "\$CLASSPATH";
+ }
+ else
+ {
+ push @ARGS, "-lib", "$classpath";
+ }
+}
+print "\n $JAVACMD @ARGS\n\n" if ($debug);
+
+my $returnValue = system $JAVACMD, @ARGS;
+if ($returnValue eq 0)
+ {
+ exit 0;
+ }
+else
+ {
+ # only 0 and 1 are widely recognized as exit values
+ # so change the exit value to 1
+ exit 1;
+ }
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runant.py
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runant.py (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runant.py 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,100 @@
+#!/usr/bin/python
+# Copyright 2001,2003-2004 The Apache Software Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+
+"""
+
+ runant.py
+
+ This script is a translation of the runant.pl written by Steve Loughran.
+ It runs ant with/out arguments, it should be quite portable (thanks to
+ the python os library)
+ This script has been tested with Python2.0/Win2K
+
+ created: 2001-04-11
+ author: Pierre Dittgen pie...@cr...
+
+ Assumptions:
+
+ - the "java" executable/script is on the command path
+"""
+import os, os.path, string, sys
+
+# Change it to 1 to get extra debug information
+debug = 0
+
+#######################################################################
+
+# If ANT_HOME is not set default to script's parent directory
+if os.environ.has_key('ANT_HOME'):
+ ANT_HOME = os.environ['ANT_HOME']
+else:
+ ANT_HOME = os.path.dirname(os.path.dirname(os.path.abspath(sys.argv[0])))
+
+# set ANT_LIB location
+ANT_LIB = os.path.join(ANT_HOME, 'lib')
+
+# set JAVACMD (check variables JAVACMD and JAVA_HOME)
+JAVACMD = None
+if not os.environ.has_key('JAVACMD'):
+ if os.environ.has_key('JAVA_HOME'):
+ if not os.path.exists(os.environ['JAVA_HOME']):
+ print "Warning: JAVA_HOME is not defined correctly."
+ else:
+ JAVACMD = os.path.join(os.environ['JAVA_HOME'], 'bin', 'java')
+ else:
+ print "Warning: JAVA_HOME not set."
+else:
+ JAVACMD = os.environ['JAVACMD']
+if not JAVACMD:
+ JAVACMD = 'java'
+
+launcher_jar = os.path.join(ANT_LIB, 'ant-launcher.jar')
+if not os.path.exists(launcher_jar):
+ print 'Unable to locate ant-launcher.jar. Expected to find it in %s' % \
+ ANT_LIB
+
+# Build up standard classpath (LOCALCLASSPATH)
+LOCALCLASSPATH = launcher_jar
+if os.environ.has_key('LOCALCLASSPATH'):
+ LOCALCLASSPATH += os.pathsep + os.environ['LOCALCLASSPATH']
+
+ANT_OPTS = ""
+if os.environ.has_key('ANT_OPTS'):
+ ANT_OPTS = os.environ['ANT_OPTS']
+
+OPTS = ""
+if os.environ.has_key('JIKESPATH'):
+ OPTS = '-Djikes.class.path=\"%s\"' % os.environ['JIKESPATH']
+
+ANT_ARGS = ""
+if os.environ.has_key('ANT_ARGS'):
+ ANT_ARGS = os.environ['ANT_ARGS']
+
+CLASSPATH = ""
+if os.environ.has_key('CLASSPATH'):
+ CLASSPATH = os.environ['CLASSPATH']
+
+# Builds the commandline
+cmdline = ('%s %s -classpath %s -Dant.home=%s %s ' + \
+ 'org.apache.tools.ant.launch.Launcher %s -lib %s %s') \
+ % (JAVACMD, ANT_OPTS, LOCALCLASSPATH, ANT_HOME, OPTS, ANT_ARGS, \
+ CLASSPATH, string.join(sys.argv[1:], ' '))
+
+if debug:
+ print '\n%s\n\n' % (cmdline)
+
+# Run the biniou!
+os.system(cmdline)
Added: trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runrc.cmd
===================================================================
--- trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runrc.cmd (rev 0)
+++ trunk/templates/org.cishell.templates.wizards/templates_3.0/static_executable/lib/ant-bin/runrc.cmd 2009-08-14 22:14:40 UTC (rev 924)
@@ -0,0 +1,59 @@
+/*
+ Copyright 2003-2004 The Apache Software Foundation
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+
+ Run RC file, name is in the first arg, second arg is either PATH
+ ENV or -r or nothing
+*/
+
+parse arg name path rest
+
+if name = '' then do
+ say 'RC file name is missing'
+ exit 1
+end
+
+if rest \= '' then do
+ say 'Too many parameters'
+ exit 1
+end
+
+call runit name path
+exit 0
+
+runit: procedure
+parse arg name path dir
+
+if path \= '' & path \= '-r' then do
+ dir = value(translate(path),,'OS2ENVIRONMENT')
+ if dir = '' then return
+ dir = translate(dir, '\', '/') /* change UNIX-like path to OS/2 */
+end
+
+if dir = '' then dir = directory()
+
+if path = '-r' then do /* recursive call */
+ subdir = filespec('path', dir)
+ if subdir \= '\' then do
+ subdir = left(subdir, length(subdir)-1)
+ call runit name path filespec('drive', dir) || subdir
+ end
+end
+
+/* Look for the file and run it */
+if right(dir, 1) \= '\' then dir = dir || '\'
+rcfile = stream(dir || name, 'c', 'query exists')
+if rcfile \= '' then interpret 'call "' || rcfile || '"'
+
+return
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
