Recent changes to Home

Home modified by

Fri, 16 May 2014 19:18:39 -0000

--- v4
+++ v5
@@ -43,7 +43,7 @@
 + You have 15 seconds to decide which interface will be assigned to LAN (master

slaves) and which to WAN (internet

master).
 + Network interfaces are listed again.
 + Input the WAN and LAN interface names.
-+ Input the IP address of your router (the installer supposes that you are inside an home/school/private network, not directly connected to the ISP. Please refer to [Arch Wiki] for details on that option).
++ Input the IP address of your router (the installer supposes that you are inside an home/school/private network, not directly connected to the ISP. Please refer to [Arch Wiki](https://wiki.archlinux.org/) for details on that option).
 + *Choose between* specifying a **static IP** address that the master would use inside your home/school/private network or letting the router's **DHCP** do that for you.

 ![IMAGE NOT FOUND](http://i57.tinypic.com/51sfg3.jpg)
@@ -74,4 +74,3 @@

 [[members limit=20]]
 [[download_button]]
-

Home modified by

Fri, 16 May 2014 19:16:10 -0000

--- v3
+++ v4
@@ -22,8 +22,8 @@
 ![IMAGE NOT FOUND](http://i58.tinypic.com/3499e8m.jpg)

 ***
-Step 1 - Booting
-----------------
+Step 2 - Installation
+---------------------

 The semi-automated C.H.A.O.S. installer will start, presenting you this screen:
 ![IMAGE NOT FOUND](http://i62.tinypic.com/1z7zoj.jpg)
@@ -74,3 +74,4 @@

 [[members limit=20]]
 [[download_button]]
+

Home modified by

Fri, 16 May 2014 19:15:23 -0000

--- v2
+++ v3
@@ -20,6 +20,10 @@

 to get the installer going.
 ![IMAGE NOT FOUND](http://i58.tinypic.com/3499e8m.jpg)
+
+***
+Step 1 - Booting
+----------------

 The semi-automated C.H.A.O.S. installer will start, presenting you this screen:
 ![IMAGE NOT FOUND](http://i62.tinypic.com/1z7zoj.jpg)

Home modified by

Fri, 16 May 2014 19:13:59 -0000

--- v1
+++ v2
@@ -1,8 +1,72 @@
-Welcome to your wiki!
+Installation
+===
+To make sure everything goes the right way, ensure to have fully understood this document.
+***
+Step 1 - Booting
+----------------
+First of all, power up your node and insert the CD. You must boot from the optical drive, but since you are going to install C.H.A.O.S. and not Ubuntu, I suppose there's no need to tell you how to do that.

-This is the default page, edit it as you see fit. To add a new page simply reference it within brackets, e.g.: [SamplePage].
+When the CD Boot Menu comes up, choose the option that suits your node's architecture.

-The wiki uses [Markdown](/p/chaosdistro/wiki/markdown_syntax/) syntax.
+
+Then, as the Live system has completed the boot procedure, you will be presented with this screen:  
+![IMAGE NOT FOUND](http://i58.tinypic.com/2uy2cyw.jpg)
+
+Enter the command:
+
+~~~~~~~~~~~~~~~~~~
+./CHAOSinstaller
+~~~~~~~~~~~~~~~~~~
+
+to get the installer going.
+![IMAGE NOT FOUND](http://i58.tinypic.com/3499e8m.jpg)
+
+The semi-automated C.H.A.O.S. installer will start, presenting you this screen:
+![IMAGE NOT FOUND](http://i62.tinypic.com/1z7zoj.jpg)
+
+Answer "**M**" if you are installing the Master node or "**N**" if a Slave. 
+This guide refers to Master installation, but the Slave setup should be the same.
+The installation will proceed asking if you want to partition:
+![IMAGE NOT FOUND](http://i58.tinypic.com/a13klw.jpg)
+
+Then the real installation will begin:
+![IMAGE NOT FOUND](http://i60.tinypic.com/ou1rtw.jpg)
+
+After all the packages have been installed, the network configuration will take place.
+This step may look kinda tricky:
+
++ Network interfaces are listed.
++ You have 15 seconds to decide which interface will be assigned to LAN (master

slaves) and which to WAN (internet

master).
++ Network interfaces are listed again.
++ Input the WAN and LAN interface names.
++ Input the IP address of your router (the installer supposes that you are inside an home/school/private network, not directly connected to the ISP. Please refer to [Arch Wiki] for details on that option).
++ *Choose between* specifying a **static IP** address that the master would use inside your home/school/private network or letting the router's **DHCP** do that for you.
+
+![IMAGE NOT FOUND](http://i57.tinypic.com/51sfg3.jpg)
+
+The last operations will be done and the bootloader will now be installed:
+![IMAGE NOT FOUND](http://i60.tinypic.com/34614sm.jpg)
+
+You're almost finished; reboot and, once in control of the prompt, start the post-install configuration script.
+
++ For Master:
+
+
+~~~~~~~~~~~~~~~~~~~~~~~
+sudo /root/postinstall
+~~~~~~~~~~~~~~~~~~~~~~~
+
+
++ For Slave:
+
+
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+sudo /root/postinstall_node
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+
+You will be asked if you want to set up USB Key or Fingerprint authentication.
+Once that script is done, refer to the [SSH] page to copy the SSH keys all over your machines.

 [[members limit=20]]
 [[download_button]]

Discussion for Home page

Fri, 16 May 2014 18:54:55 -0000

Installation

To make sure everything goes the right way, ensure to have fully understood this document.

Step 1 - Booting

First of all, power up your node and insert the CD. You must boot from the optical drive, but since you are going to install C.H.A.O.S. and not Ubuntu, I suppose there's no need to tell you how to do that.

When the CD Boot Menu comes up, choose the option that suits your node's architecture.

Then, as the Live system has completed the boot procedure, you will be presented with this screen:

Enter the command:

./CHAOSinstaller

to get the installer going.

The semi-automated C.H.A.O.S. installer will start, presenting you this screen:

Answer "M" if you are installing the Master node or "N" if a Slave.
This guide refers to Master installation, but the Slave setup should be the same.
The installation will proceed asking if you want to partition:

Then the real installation will begin:

After all the packages have been installed, the network configuration will take place.
This step may look kinda tricky:

Network interfaces are listed.
You have 15 seconds to decide which interface will be assigned to LAN (master<>slaves) and which to WAN (internet<>master).
Network interfaces are listed again.
Input the WAN and LAN interface names.
Input the IP address of your router (the installer supposes that you are inside an home/school/private network, not directly connected to the ISP. Please refer to [Arch Wiki] for details on that option).
Choose between specifying a static IP address that the master would use inside your home/school/private network or letting the router's DHCP do that for you.

The last operations will be done and the bootloader will now be installed:

You're almost finished; reboot and, once in control of the prompt, start the post-install configuration script.

For Master:

sudo /root/postinstall
For Slave:

sudo /root/postinstall_node

You will be asked if you want to set up USB Key or Fingerprint authentication.
Once that script is done, refer to the [SSH] page to copy the SSH keys all over your machines.

Home modified by

Tue, 13 May 2014 12:27:38 -0000

Welcome to your wiki!

This is the default page, edit it as you see fit. To add a new page simply reference it within brackets, e.g.: [SamplePage].

The wiki uses Markdown syntax.

Project Members:

Niccolò Maggioni (admin)