Menu
▾
▴
cdrtools-support
|
From: Артур И. <art...@ya...> - 2016-02-10 02:43:23
|
I can't write dvd-rw disk with cdrecord. dvd+rw-tools work perfectly
fine, but I don't want to use both tools to record cd/dvd when I can
only one. I'am using OpenBSD 5.8
First I blank dvd with:
$cdrecord -v -dev=/dev/rcd0c -blank=all
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 751616 = 734 KB
Current Secsize: 2048
WARNING: Phys disk size 1 differs from rzone size 2297888! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 196608
Starting to write CD/DVD/BD at speed 2 in real BLANK mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Blanking entire disk
Blanking time: 1752.884s
Then I reload disk and writing with:
$cdrecord -v -dev=/dev/rcd0c -dao /path/to/image.iso
drecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-openbsd5.8) Copyright (C) 1995-2010 J�rg Schilling [37/85]
TOC Type: 1 = CD-ROM
scsidev: '/dev/rcd0c'
devname: '/dev/rcd0c'
scsibus: -2 target: -2 lun: -2
Using libscg version 'schily-0.9'.
SCSI buffer size: 61440
atapi: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GU61N '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-RW sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: 0x0018
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential recording (current)
Profile: DVD-RW restricted overwrite (current)
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 751616 = 734 KB
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
FIFO size : 4194304 = 4096 KB
Track 01: data 586 MB
Total size: 586 MB = 300348 sectors
Current Secsize: 2048
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1998148
Reducing transfer size from 61440 to 32768 bytes.
Starting to write CD/DVD/BD at speed 2 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Turning BURN-Free off
Starting new track at sector: 0
Track 01: 0 of 586 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 00 00 70 00 00 10 00
status: 0x0 (GOOD STATUS)
resid: 32768
cmd finished after 0.002s timeout 200s
write track data: error after 229376 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
CDB: 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
Writing time: 12.940s
Average write speed 34.4x.
Fixating...
cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
CDB: 35 00 00 00 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 1000s
Trouble flushing the cache
cdrecord: Cannot fixate disk.
Fixating time: 0.000s
cdrecord: Input/output error. prevent/allow medium removal: scsi sendcmd: retryable error
CDB: 1E 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.009s timeout 200s
cdrecord: fifo had 135 puts and 8 gets.
cdrecord: fifo was 0 times empty and 1 times full, min fill was 94%.
In dmesg I see:
cd0(ahci0:4:0): Check Condition (error 0x70) on opcode 0x28
SENSE KEY: Media Error
Here is with -atip:
$ cdrecord -v -dev=/dev/rcd0c -atip
Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-openbsd5.8) Copyright (C) 1995-2010 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/rcd0c'
devname: '/dev/rcd0c'
scsibus: -2 target: -2 lun: -2
Using libscg version 'schily-0.9'.
SCSI buffer size: 61440
atapi: 0
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GU61N '
Revision : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: DVD-RW sequential recording
Profile: DVD-R/DL sequential recording
Profile: DVD-R/DL layer jump recording
Profile: 0x0018
Profile: DVD+R/DL
Profile: DVD+R
Profile: DVD+RW
Profile: DVD-RW sequential recording (current)
Profile: DVD-RW restricted overwrite (current)
Profile: DVD-RAM
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Profile: Removable Disk
Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: PACKET SAO LAYER_JUMP
Drive buf size : 751616 = 734 KB
cdrecord: Warning: Cannot read drive buffer.
cdrecord: Warning: The DMA speed test has been skipped.
Current Secsize: 2048
book type: DVD-RW, Version 1.1x (3.2)
disc size: 120mm (0)
maximum rate: Not specified (15)
number of layers:1 [4/284]
track path: Parallel Track Path (0)
layer type: Rewritable Area (2)
linear density: 0.267 �m/bit (0)
track density: 0.74 �m/track (0)
phys start: 196608 (0x30000)
phys end: 496955
end layer 0: 0
bca: 0
phys size:... 300348
copyr prot type: 0
region mgt info: 0
last rma sector: 0
application code:64
physical code: 214
last rec address:16621272
part v./ext code:2/1
ind wr. power: 13
wavelength code: 6
write str. code: 07 88 65 0D
Manufacturer: 'RITEKW01'
rzone size: 40
rzone number: 1
border number: 1
ljrs: 0
track mode: 4 copy: 0
damage: 0
reserved track: 0 blank: 0 incremental: 0 fp: 0
data mode: 1
lra valid: 1
nwa valid: 1
rzone start: 0
next wr addr: 96
free blocks: 2298400
blocking factor: 16
rzone size: 2298496
last recorded addr: 79
read compat lba: 0
Capacity Blklen/Sparesz. Format-type Type
2297888 2048 0x00 Unformated or Blank Media
2297888 2048 0x00 Reserved (0)
2297888 16 0x10 Reserved (0)
2297888 16 0x15 Reserved (0)
WARNING: Phys disk size 300348 differs from rzone size 2298496! Prerecorded disk?
WARNING: Phys start: 196608 Phys end 496955
I suspect that problem with bad media/manufacturer, but dvd+rw-tools circumvent
this somehow.
Thank you!
|
|
From: Joerg S. <Joe...@fo...> - 2016-02-10 11:17:37
|
????? ??????? <art...@ya...> wrote:
> I can't write dvd-rw disk with cdrecord. dvd+rw-tools work perfectly
> fine, but I don't want to use both tools to record cd/dvd when I can
> only one. I'am using OpenBSD 5.8
Hi Artur,
It seems that you are suffering from a similar kernel bug as recently discovered
on Linux.
Is this device connected via USB-3?
Background:
the kernel reports a DMA residual count that is equal to the expected transfer
count and there is no other (real) SCSI error reported.
Given that cdrecord decently evaluates all possible error states, it stops
writing because of this error reported by the kernel.
If dvd+rw-tools work for you, then this is most likely a result of ignoring the
error codes in dvd+rw-tools.
You can tell cdrecord to ignore this specific error situation by adding the
option:
scgopts=ignore-resid
to your command line.
Note that you need to upgrade your outdated cdrecord first, in order to be able
to do so.
> First I blank dvd with:
> $cdrecord -v -dev=/dev/rcd0c -blank=all
> Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
> Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
> Supported modes: PACKET SAO LAYER_JUMP
> Drive buf size : 751616 = 734 KB
> Current Secsize: 2048
> WARNING: Phys disk size 1 differs from rzone size 2297888! Prerecorded disk?
> WARNING: Phys start: 196608 Phys end 196608
> Starting to write CD/DVD/BD at speed 2 in real BLANK mode for single session.
> Last chance to quit, starting real write 0 seconds. Operation starts.
> Blanking entire disk
>
> Blanking time: 1752.884s
>
> Then I reload disk and writing with:
> $cdrecord -v -dev=/dev/rcd0c -dao /path/to/image.iso
> drecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-openbsd5.8) Copyright (C) 1995-2010 J?rg Schilling [37/85]
> TOC Type: 1 = CD-ROM
> scsidev: '/dev/rcd0c'
> devname: '/dev/rcd0c'
> scsibus: -2 target: -2 lun: -2
> Using libscg version 'schily-0.9'.
> SCSI buffer size: 61440
> atapi: 0
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'HL-DT-ST'
> Identifikation : 'DVDRAM GU61N '
> Revision : '1.00'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Current: DVD-RW sequential recording
> Profile: DVD-R/DL sequential recording
> Profile: DVD-R/DL layer jump recording
> Profile: 0x0018
> Profile: DVD+R/DL
> Profile: DVD+R
> Profile: DVD+RW
> Profile: DVD-RW sequential recording (current)
> Profile: DVD-RW restricted overwrite (current)
> Profile: DVD-RAM
> Profile: DVD-R sequential recording
> Profile: DVD-ROM
> Profile: CD-RW
> Profile: CD-R
> Profile: CD-ROM
> Profile: Removable Disk
> Using generic SCSI-3/mmc-2 DVD-R/DVD-RW/DVD-RAM driver (mmc_dvd).
> Driver flags : NO-CD DVD MMC-3 SWABAUDIO BURNFREE
> Supported modes: PACKET SAO LAYER_JUMP
> Drive buf size : 751616 = 734 KB
> cdrecord: Warning: Cannot read drive buffer.
> cdrecord: Warning: The DMA speed test has been skipped.
> FIFO size : 4194304 = 4096 KB
> Track 01: data 586 MB
> Total size: 586 MB = 300348 sectors
> Current Secsize: 2048
> Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 1998148
> Reducing transfer size from 61440 to 32768 bytes.
> Starting to write CD/DVD/BD at speed 2 in real SAO mode for single session.
> Last chance to quit, starting real write 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> BURN-Free is ON.
> Turning BURN-Free off
> Starting new track at sector: 0
> Track 01: 0 of 586 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> CDB: 2A 00 00 00 00 70 00 00 10 00
> status: 0x0 (GOOD STATUS)
> resid: 32768
> cmd finished after 0.002s timeout 200s
Jörg
--
EMail:jo...@sc... (home) Jörg Schilling D-13353 Berlin
joe...@fo... (work) Blog: http://schily.blogspot.com/
URL: http://cdrecord.org/private/ http://sourceforge.net/projects/schilytools/files/'
|