[cbm4linux-users] Device not found?

[Mick R. <mic...@fr...>]

Can anyone please help with this problem?  I am using the direct port
access setup.  I can reset the drive, but apparently nothing else. I am
using an XA1541 cable and an Athlon XP 2200+ with gentoo linux.

I have the module install at boot, giving the proper options:
modprobe cbm port=0x378 irq=7 cable=-1 reset=-1
seems to work.  When I try to use it: see below.

# cbmctrl reset        <--This works
# cbmctrl detect       <--Nothing appears to happen
# cbmctrl command 8 I0:
cbmctrl: command: No such device

I have tried using modprobe -v to check what it is doing when it uses
insmod, as well as
/proc/interrupts and /proc/ioports.  Also lsmod to see if it is really
installed.  I have used 'regular' and EPP modes on the port.  I can't
find any problems (yet!)  Any help is really appreciated!

Mick

 mic...@sd...
SDF Public Access UNIX System - http://sdf.lonestar.org
mick_makes_em on ebay.com