Re: [bwm-tools-tech] Re: Cannot run bwmd
Brought to you by:
nkukard
Menu
▾
▴
Re: [bwm-tools-tech] Re: Cannot run bwmd
|
From: Victor Y. <ye...@nd...> - 2005-04-29 12:01:26
|
i think there is error in bwm_graph_Makefile
the LOG_DIR must be /var/bwm_tools
can someone confirm this?
victor
----- Original Message -----=20
From: Victor Yeo=20
To: bwm...@li...=20
Sent: Friday, April 29, 2005 6:50 PM
Subject: Re: [bwm-tools-tech] Re: Cannot run bwmd
hi again,
ok, i figured out the root cause with bwm_graph. It is because of the =
date format has changed.
Now, i still get other errors when i run bwm_graph. My *.dat files are =
in /var/bwm_tools/. WHy must it prefix /home/yeosv/local/bwm to the =
path?????? thanks.
[yeosv@BWT bwm_tools]$ ./bwm_graph =
--flows=3Dout_dsl,out_jane,out_kobe,out_niels,out_other =
--start=3D2005/04/30 --end=3D2005/05/1 --graph-filename=3Dtest
BWM Graph v0.2.1 - Copyright (c) 2003-2005 Linux Based Systems Design
Creating RRD files...
Failed opening file /home/yeosv/local/bwm//var/bwm_tools/out_dsl.dat: =
No such file or directory
Failed opening file /home/yeosv/local/bwm//var/bwm_tools/out_jane.dat: =
No such file or directory
Failed opening file /home/yeosv/local/bwm//var/bwm_tools/out_kobe.dat: =
No such file or directory
Failed opening file =
/home/yeosv/local/bwm//var/bwm_tools/out_niels.dat: No such file or =
directory
Failed opening file =
/home/yeosv/local/bwm//var/bwm_tools/out_other.dat: No such file or =
directory
Getting details for =
/home/yeosv/local/bwm//var/bwm_tools/out_dsl.dat... Getting details =
for /home/yeosv/local/bwm//var/bwm_tools/out_jane.dat... Getting =
details for /home/yeosv/local/bwm//var/bwm_tools/out_kobe.dat... =
Getting details for =
/home/yeosv/local/bwm//var/bwm_tools/out_niels.dat... Getting details =
for /home/yeosv/local/bwm//var/bwm_tools/out_other.dat...Writing data to =
RRD files...
Failed opening file /home/yeosv/local/bwm//var/bwm_tools/out_dsl.dat: =
No such file or directory
Failed opening file /home/yeosv/local/bwm//var/bwm_tools/out_jane.dat: =
No such file or directory
Failed opening file /home/yeosv/local/bwm//var/bwm_tools/out_kobe.dat: =
No such file or directory
Failed opening file =
/home/yeosv/local/bwm//var/bwm_tools/out_niels.dat: No such file or =
directory
Failed opening file =
/home/yeosv/local/bwm//var/bwm_tools/out_other.dat: No such file or =
directory
Failed to create RRD graph test: opening =
'/home/yeosv/local/bwm//var/bwm_tools/out_dsl.rrd': No such file or =
directory
Processing file =
/home/yeosv/local/bwm//var/bwm_tools/out_dsl.dat... Processing file =
/home/yeosv/local/bwm//var/bwm_tools/out_jane.dat... Processing file =
/home/yeosv/local/bwm//var/bwm_tools/out_kobe.dat... Processing file =
/home/yeosv/local/bwm//var/bwm_tools/out_niels.dat... Processing file =
/home/yeosv/local/bwm//var/bwm_tools/out_other.dat...Graphing flows...
thanks,
victor
----- Original Message -----=20
From: Victor Yeo=20
To: bwm...@li...=20
Sent: Friday, April 29, 2005 6:30 PM
Subject: Re: [bwm-tools-tech] Re: Cannot run bwmd
hi again,
Now i wish to run bwm_graph to generate graphics. I encounter error =
with the following commands:
Why it can't convert the date?
$ /home/yeosv/local/bwm/bin/bwm_graph =
--flows=3Dout_dsl,out_jane,out_kobe,out_niels,out_other =
--start=3D31/05/2005 --end=3D31/05/2005 --output=3D/home/yeosv/test.png
BWM Graph v0.2.1 - Copyright (c) 2003-2005 Linux Based Systems =
Design
ERROR: Failed to convert 31/05/2005 to date timeERROR: Error in =
start time specified
Please help me. Thanks.
victor
----- Original Message -----=20
From: "Victor Yeo" <ye...@nd...>
To: <bwm...@li...>
Sent: Friday, April 29, 2005 5:52 PM
Subject: Re: [bwm-tools-tech] Re: Cannot run bwmd
> i got it:
>=20
> here it is to load the queue target:
> /sbin/modprobe ip_queue.
>=20
> thanks for the hint.
>=20
> victor
>=20
> ----- Original Message -----=20
> From: "Victor Yeo" <ye...@nd...>
> To: <bwm...@li...>
> Sent: Friday, April 29, 2005 5:42 PM
> Subject: Re: [bwm-tools-tech] Re: Cannot run bwmd
>=20
>=20
> > Hi,
> >
> > Thanks for the reply. I don't really understand your meaning.
> >
> > How do i modprobe queue, i try this: "/sbin/modprobe queue". It =
is not
> > working. Can i do a "make menuconfig" first and build the queue =
target?
> >
> > This is my firewall.xml fire. Is there any mistakes within it?
> >
> > Thanks for any reply.
> >
> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
> > <firewall>
> > # Global configuration and access classes
> >
> > <global>
> > <class name=3D"out_other">
> > <address name=3D"out_other_tcp" =
src-iface=3D"eth0"
> > proto=3D"tcp"/>
> > <address name=3D"out_other_udp" =
src-iface=3D"eth0"
> > proto=3D"udp"/>
> > </class>
> > <class name=3D"out_jane">
> > <address name=3D"out_jane_tcp" src-iface=3D"eth0" =
proto=3D"tcp"
> > src=3D"192.168.4.50" dst=3D"! 192.168.0.0/24"/>
> > <address name=3D"out_jane_udp" src-iface=3D"eth0" =
proto=3D"udp"
> > src=3D"192.168.4.50" dst=3D"! 192.168.0.0/24"/>
> > </class>
> >
> > <class name=3D"out_niels">
> > <address name=3D"out_niels_tcp" src-iface=3D"eth0" =
proto=3D"tcp"
> > src=3D"192.168.2.250" dst=3D"! 192.168.0.0/24"/>
> > <address name=3D"out_niels_udp" src-iface=3D"eth0" =
proto=3D"udp"
> > src=3D"192.168.2.250" dst=3D"! 192.168.0.0/24"/>
> > </class>
> >
> > <class name=3D"out_kobe">
> > <address name=3D"out_kobe_tcp" =
src-iface=3D"eth0"
> > proto=3D"tcp" src=3D"192.168.4.38" dst=3D"! 192.168.0.0/24"/>
> > <address name=3D"out_kobe_udp" =
src-iface=3D"eth0"
> > proto=3D"udp" src=3D"192.168.4.38" dst=3D"! 192.168.0.0/24"/>
> > </class>
> >
> > </global>
> >
> > # Access control lists
> > # Network address translation
> > # Traffic flows
> > <traffic>
> > # Rate can be specified in either IN, OUT or TOTAL (rate-total)
> > # If rate-total =3D=3D 0, no rate limits
> > <flow name=3D"out_dsl" stats-len=3D"5" queue-size=3D"262144" =
queue-len=3D"400"
> > max-rate=3D"15288" burst-rate=3D"16384" report-timeout=3D"60">
> > <flow name=3D"out_jane" max-rate=3D"10240" =
queue-size=3D"16384" stats-len=3D"5"
> > report-timeout=3D"60">
> > <queue prio=3D"40" nfmark=3D"1001">
> > out_jane;
> > </queue>
> > </flow>
> > <flow name=3D"out_niels" max-rate=3D"10240" =
queue-size=3D"16384" stats-len=3D"5"
> > report-timeout=3D"60">
> > <queue prio=3D"30" nfmark=3D"1002">
> > out_niels;
> > </queue>
> > </flow>
> > <flow name=3D"out_kobe" max-rate=3D"10240" =
queue-size=3D"16384"
> > stats-len=3D"5" report-timeout=3D"60">
> > <queue prio=3D"30" nfmark=3D"1003">
> > out_kobe;
> > </queue>
> > </flow>
> > <flow name=3D"out_other" max-rate=3D"2048" burst-rate=3D"6144"
> > queue-size=3D"32768" stats-len=3D"5" report-timeout=3D"60">
> > <queue prio=3D"90" nfmark=3D"1008">
> > out_other;
> > </queue>
> > </flow>
> > </flow>
> > </traffic>
> > </firewall>
> >
> >
> >
> > ----- Original Message -----=20
> > From: Nigel Kukard
> > To: Victor Yeo
> > Cc: bwm...@li...
> > Sent: Friday, April 29, 2005 4:53 PM
> > Subject: Re: [bwm-tools-tech] Re: Cannot run bwmd
> >
> >
> > Hi Victor,
> >
> > You must also build in the QUEUE target for iptables and if you =
built this
> > as a module you need to modprobe queue first.
> >
> > Regards
> > Nigel
> >
> >
> > >Victor Yeo wrote:
> > >hi again,
> > >
> > >i have build iptables on kernel. i still have problems when i =
run
> bwmd.
> > Please help me. Thanks.
> > >
> >
> =
>------------------------------------------------------------------------=
---
> > -----------------------------
> > >
> > >$ ./bwmd -f
> > >BWM Daemon v0.2.1 - Copyright (c) 2003-2005 Linux Based Systems =
Design
> > >
> > >BWMD: Loaded 5 flows and 4 queues
> > >BWMD: Found 0 modules to load
> > >IPQ runner started...
> > >Failed to set IPQ mode
> > >passer: Failed to send netlink message: Connection refused
> > >Failed to get IPQ handle
> > >Flow runner started...
> > >Stat thread started...
> > >Report runner started...
> >
> >
> >
> >
> > -------------------------------------------------------
> > SF.Net email is sponsored by: Tell us your software development =
plans!
> > Take this survey and enter to win a one-year sub to =
SourceForge.net
> > Plus IDC's 2005 look-ahead and a copy of this survey
> > Click here to start! =
http://www.idcswdc.com/cgi-bin/survey?id=3D105hix
> > _______________________________________________
> > bwm-tools-tech mailing list
> > bwm...@li...
> > https://lists.sourceforge.net/lists/listinfo/bwm-tools-tech
> >
>=20
>=20
>=20
>=20
> -------------------------------------------------------
> SF.Net email is sponsored by: Tell us your software development =
plans!
> Take this survey and enter to win a one-year sub to =
SourceForge.net
> Plus IDC's 2005 look-ahead and a copy of this survey
> Click here to start! =
http://www.idcswdc.com/cgi-bin/survey?id=3D105hix
> _______________________________________________
> bwm-tools-tech mailing list
> bwm...@li...
> https://lists.sourceforge.net/lists/listinfo/bwm-tools-tech
> |
