Re: [bwm-tools-tech] Re: Cannot run bwmd

[Victor Y. <ye...@nd...>]

i got it:

here it is to load the queue target:
/sbin/modprobe ip_queue.

thanks for the hint.

victor

----- Original Message ----- 
From: "Victor Yeo" <ye...@nd...>
To: <bwm...@li...>
Sent: Friday, April 29, 2005 5:42 PM
Subject: Re: [bwm-tools-tech] Re: Cannot run bwmd


> Hi,
>
> Thanks for the reply. I don't really understand your meaning.
>
> How do i modprobe queue, i try this: "/sbin/modprobe queue". It is not
> working. Can i do a "make menuconfig" first and build the queue target?
>
> This is my firewall.xml fire. Is there any mistakes within it?
>
> Thanks for any reply.
>
===========================================================================
> <firewall>
>  # Global configuration and access classes
>
>  <global>
>    <class name="out_other">
>                         <address name="out_other_tcp" src-iface="eth0"
> proto="tcp"/>
>                         <address name="out_other_udp" src-iface="eth0"
> proto="udp"/>
>                 </class>
>   <class name="out_jane">
>    <address name="out_jane_tcp" src-iface="eth0" proto="tcp"
> src="192.168.4.50" dst="! 192.168.0.0/24"/>
>    <address name="out_jane_udp" src-iface="eth0" proto="udp"
> src="192.168.4.50" dst="! 192.168.0.0/24"/>
>   </class>
>
>   <class name="out_niels">
>    <address name="out_niels_tcp" src-iface="eth0" proto="tcp"
> src="192.168.2.250" dst="! 192.168.0.0/24"/>
>    <address name="out_niels_udp" src-iface="eth0" proto="udp"
> src="192.168.2.250" dst="! 192.168.0.0/24"/>
>   </class>
>
>                 <class name="out_kobe">
>                         <address name="out_kobe_tcp" src-iface="eth0"
> proto="tcp" src="192.168.4.38" dst="! 192.168.0.0/24"/>
>                         <address name="out_kobe_udp" src-iface="eth0"
> proto="udp" src="192.168.4.38" dst="! 192.168.0.0/24"/>
>                 </class>
>
>  </global>
>
>  # Access control lists
>  # Network address translation
>  # Traffic flows
> <traffic>
>  # Rate can be specified in either IN, OUT or TOTAL (rate-total)
>  # If rate-total == 0, no rate limits
>  <flow name="out_dsl" stats-len="5" queue-size="262144" queue-len="400"
> max-rate="15288" burst-rate="16384" report-timeout="60">
>   <flow name="out_jane" max-rate="10240" queue-size="16384" stats-len="5"
> report-timeout="60">
>    <queue prio="40" nfmark="1001">
>        out_jane;
>    </queue>
>   </flow>
>   <flow name="out_niels" max-rate="10240" queue-size="16384" stats-len="5"
> report-timeout="60">
>    <queue prio="30" nfmark="1002">
>     out_niels;
>    </queue>
>   </flow>
>                 <flow name="out_kobe" max-rate="10240" queue-size="16384"
> stats-len="5" report-timeout="60">
>                         <queue prio="30" nfmark="1003">
>                                 out_kobe;
>                         </queue>
>                 </flow>
>   <flow name="out_other" max-rate="2048" burst-rate="6144"
> queue-size="32768" stats-len="5" report-timeout="60">
>                         <queue prio="90" nfmark="1008">
>                                 out_other;
>                         </queue>
>                 </flow>
>  </flow>
> </traffic>
> </firewall>
>
>
>
> ----- Original Message ----- 
> From: Nigel Kukard
> To: Victor Yeo
> Cc: bwm...@li...
> Sent: Friday, April 29, 2005 4:53 PM
> Subject: Re: [bwm-tools-tech] Re: Cannot run bwmd
>
>
> Hi Victor,
>
> You must also build in the QUEUE target for iptables and if you built this
> as a module you need to modprobe queue first.
>
> Regards
> Nigel
>
>
> >Victor Yeo wrote:
> >hi again,
> >
> >i have build iptables  on kernel. i still  have problems when i run
bwmd.
> Please help me. Thanks.
> >
>
>---------------------------------------------------------------------------
> -----------------------------
> >
> >$ ./bwmd -f
> >BWM Daemon v0.2.1 - Copyright (c) 2003-2005 Linux Based Systems Design
> >
> >BWMD: Loaded 5 flows and 4 queues
> >BWMD: Found 0 modules to load
> >IPQ runner started...
> >Failed to set IPQ mode
> >passer: Failed to send netlink message: Connection refused
> >Failed to get IPQ handle
> >Flow runner started...
> >Stat thread started...
> >Report runner started...
>
>
>
>
> -------------------------------------------------------
> SF.Net email is sponsored by: Tell us your software development plans!
> Take this survey and enter to win a one-year sub to SourceForge.net
> Plus IDC's 2005 look-ahead and a copy of this survey
> Click here to start!  http://www.idcswdc.com/cgi-bin/survey?id=105hix
> _______________________________________________
> bwm-tools-tech mailing list
> bwm...@li...
> https://lists.sourceforge.net/lists/listinfo/bwm-tools-tech
>