[bwm-tools-tech] Make install, BWM Tools (ok)

[<A.R...@as...>]

it's ok , i think, but how check if bwm tool is ready ?

./configure-->
configure: creating ./config.status
config.status: creating Makefile
config.status: creating lib/Makefile
config.status: creating bwm=5Ffirewall/Makefile
config.status: creating bwm=5Fgraph/Makefile
config.status: creating bwmd/Makefile
config.status: creating bwm=5Fmonitor/Makefile
config.status: creating config.h
config.status: executing depfiles commands
[root@localhost bwm=5Ftools-0.1.8]#


make-->
creating bwm=5Fmonitor
make[2]: Leaving directory `/tmp/bwm=5Ftools-0.1.8/bwm=5Fmonitor'
make[2]: Entering directory `/tmp/bwm=5Ftools-0.1.8'
make[2]: Leaving directory `/tmp/bwm=5Ftools-0.1.8'
make[1]: Leaving directory `/tmp/bwm=5Ftools-0.1.8'
[root@localhost bwm=5Ftools-0.1.8]#


make install-->
mkdir -p -- . /usr/local/bin
  /bin/sh ../libtool --mode=3Dinstall /usr/bin/install -c bwmd=20
/usr/local/bin/bwmd
/usr/bin/install -c .libs/bwmd /usr/local/bin/bwmd
make[2]: Rien =E0 faire pour =AB install-data-am =BB.
make[2]: Leaving directory `/tmp/bwm=5Ftools-0.1.8/bwmd'
make[1]: Leaving directory `/tmp/bwm=5Ftools-0.1.8/bwmd'
Making install in bwm=5Fmonitor
make[1]: Entering directory `/tmp/bwm=5Ftools-0.1.8/bwm=5Fmonitor'
make[2]: Entering directory `/tmp/bwm=5Ftools-0.1.8/bwm=5Fmonitor'
mkdir -p -- . /usr/local/bin
  /bin/sh ../libtool --mode=3Dinstall /usr/bin/install -c bwm=5Fmonitor=20
/usr/local/bin/bwm=5Fmonitor
/usr/bin/install -c .libs/bwm=5Fmonitor /usr/local/bin/bwm=5Fmonitor
make[2]: Rien =E0 faire pour =AB install-data-am =BB.
make[2]: Leaving directory `/tmp/bwm=5Ftools-0.1.8/bwm=5Fmonitor'
make[1]: Leaving directory `/tmp/bwm=5Ftools-0.1.8/bwm=5Fmonitor'
make[1]: Entering directory `/tmp/bwm=5Ftools-0.1.8'
make[2]: Entering directory `/tmp/bwm=5Ftools-0.1.8'
make[2]: Rien =E0 faire pour =AB install-exec-am =BB.
make[2]: Rien =E0 faire pour =AB install-data-am =BB.
make[2]: Leaving directory `/tmp/bwm=5Ftools-0.1.8'
make[1]: Leaving directory `/tmp/bwm=5Ftools-0.1.8'
[root@localhost bwm=5Ftools-0.1.8]#


Rodolphe ALT
Service Informatique
ASWO France

----- R=E9achemin=E9 par Alt Rodolphe/aswo le 16/04/2004 20:24 -----


A.R...@as...
Envoy=E9 par : bwm...@li...
16/04/2004 20:03

=20
        Pour :  bwm...@li...
        cc :=20
        Objet : [bwm-tools-tech] Make, BWM Tools (ok)




i have setup=20

*ldconfig 2.3=20
*lpg 0.4=20
*libpng3=20


make-->=20
creating bwm=5Fmonitor=20
make[2]: Leaving directory `/tmp/bwm=5Ftools-0.1.8/bwm=5Fmonitor'=20
make[2]: Entering directory `/tmp/bwm=5Ftools-0.1.8'=20
make[2]: Leaving directory `/tmp/bwm=5Ftools-0.1.8'=20
make[1]: Leaving directory `/tmp/bwm=5Ftools-0.1.8'=20
[root@localhost bwm=5Ftools-0.1.8]#=20

it 's good NOW=20

ouf.....=20

i will test "make install".... now=20



Rodolphe ALT
Service Informatique
ASWO France

----- R=E9achemin=E9 par Alt Rodolphe/aswo le 16/04/2004 19:55 -----=20

A.R...@as...=20
Envoy=E9 par : bwm...@li...=20
16/04/2004 19:46=20
       =20
        Pour :        bwm...@li...=20
        cc :        =20
        Objet :        [bwm-tools-tech] Make, BWM Tools




i have setup=20

*libpanel applet 2.2.x


but it's the same message of error:=20

make-->=20
gcc -g -O2 -o .libs/bwm=5Ffirewall bwm=5Ffirewall-bwm=5Ffirewall.o  -pthrea=
d=20
-lpanel -lncurses -lmenu ../lib/.libs/libbwm.so /usr/lib/libgthread-2.0.so =

-lpthread /usr/lib/libglib-2.0.so /usr/lib/libxml2.so -lz -lm -Wl,--rpath=20
-Wl,/usr/local/lib=20
/usr/bin/ld: cannot find -lpanel=20
collect2: ld returned 1 exit status=20
make[2]: *** [bwm=5Ffirewall] Erreur 1=20
make[2]: Leaving directory `/tmp/bwm=5Ftools-0.1.8/bwm=5Ffirewall'=20
make[1]: *** [all-recursive] Erreur 1=20
make[1]: Leaving directory `/tmp/bwm=5Ftools-0.1.8'=20
make: *** [all] Erreur 2=20
[root@localhost bwm=5Ftools-0.1.8]#=20



Rodolphe ALT
Service Informatique
ASWO France

----- R=E9achemin=E9 par Alt Rodolphe/aswo le 16/04/2004 19:44 -----=20

A.R...@as...=20
Envoy=E9 par : bwm...@li...=20
16/04/2004 19:37=20
       =20
       Pour :        bwm...@li...=20
       cc :        =20
       Objet :        [bwm-tools-tech] Make, BWM Tools





now , "./configure" is ok=20
but when i execute "make"

make-->=20
make[2]: *** [bwm=5Ffirewall] Erreur 1=20
make[2]: Leaving directory `/tmp/bwm=5Ftools-0.1.8/bwm=5Ffirewall'=20
make[1]: *** [all-recursive] Erreur 1=20
make[1]: Leaving directory `/tmp/bwm=5Ftools-0.1.8'=20
make: *** [all] Erreur 2=20
[root@localhost bwm=5Ftools-0.1.8]#=20


What is it , again now ?=20


Rodolphe ALT
Service Informatique
ASWO France=20