From: Erik M. <J.A...@IT...> - 2001-10-15 22:09:57
|
On Mon, Oct 15, 2001 at 02:56:39PM -0700, Erik Mouw wrote: > Modified Files: > nesa.c pleb.c shannon.c system3.c > Log Message: > Nesa flash functions. Not tested, but they should work. Please test, Russ. Grrrr, I hate following up to my own messages. My intention was to commit each file with a separate CVS commit. Anyway, here is the rest of the log: Pleb flash functions should still be fleshed out. Pleb turns the LED on and locks it early in the boot process, so the LED shouldn't go off anymore, and hence the serial port should remain working. Shannon flash functions are not tested but they should work. Please fill out the correct flash table. Please test, Russ and Tim. PT System3 flash functions should be fleshed out. Stefan? Note that the flash descriptions are currently not used in the erase and write functions, but I want to use them for the flash partitioning support (which should become easier right now). Erik -- J.A.K. (Erik) Mouw, Information and Communication Theory Group, Department of Electrical Engineering, Faculty of Information Technology and Systems, Delft University of Technology, PO BOX 5031, 2600 GA Delft, The Netherlands Phone: +31-15-2783635 Fax: +31-15-2781843 Email: J.A...@it... WWW: http://www-ict.its.tudelft.nl/~erik/ |