Update of /cvsroot/blob/blob/include/blob/arch
In directory usw-pr-cvs1:/tmp/cvs-serv24318/include/blob/arch
Added Files:
miniprint.h
Log Message:
- miniprint board port by Urs Kaufmann
--- NEW FILE: miniprint.h ---
/*
* miniprint.h: miniprint specific defines
*
* Copyright (C) 2001 Erik Mouw (J.A...@it...)
* Copyright (C) 2002 Urs Kaufmann <u_k...@bl...>
* Copyright (C) 2002 Stefan Eletzhofer <ste...@el...>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ident "$Id: miniprint.h,v 1.1 2002/05/27 13:05:03 seletz Exp $"
#ifndef BLOB_ARCH_MINIPRINT_H
#define BLOB_ARCH_MINIPRINT_H
/* boot CPU speed */
#define CPU_SPEED CPU_CORE_SPEED_206mhz
/* serial port */
#define USE_SERIAL3
#define TERMINAL_SPEED baud_9600
/* GPIO for the LED */
#define LED_GPIO (0x00000000) /* No LEDs */
/* the base address were BLOB is loaded by the first stage loader */
#define BLOB_ABS_BASE_ADDR (0xc0200400)
/* where do various parts live in RAM */
#define BLOB_RAM_BASE (0xc0100000)
#define KERNEL_RAM_BASE (0xC0008000)
#define PARAM_RAM_BASE (0xc0110000)
#define RAMDISK_RAM_BASE (0xC0400000)
/* and where do they live in flash */
#define BLOB_FLASH_BASE (0x00000000)
#define BLOB_FLASH_LEN (256 * 1024)
#define PARAM_FLASH_BASE (BLOB_FLASH_BASE + BLOB_FLASH_LEN)
#define PARAM_FLASH_LEN (256 * 1024)
#define KERNEL_FLASH_BASE (PARAM_FLASH_BASE + PARAM_FLASH_LEN)
#define KERNEL_FLASH_LEN (1024 * 1024)
#define LOAD_RAMDISK 1 /* load ramdisk into ram */
#define RAMDISK_FLASH_BASE (KERNEL_FLASH_BASE + KERNEL_FLASH_LEN)
#define RAMDISK_FLASH_LEN (4 * 1024 * 1024)
/* the position of the kernel boot parameters */
#define BOOT_PARAMS (0xc0000100)
/* the size (in kbytes) to which the compressed ramdisk expands */
#define RAMDISK_SIZE (8 * 1024)
/* Memory configuration */
#ifdef BLOB_NEED_MEMCONFIG
#warning "use defines from memsetup.h for better readability"
# define MDCNFG_VALUE 0x0000b255 /* 0x0 MDCNFG */
# define MDCAS00_VALUE 0xAAAAAA9F /* 0x04 MDCAS00 */
# define MDCAS01_VALUE 0xAAAAAAAA /* 0x08 MDCAS01 */
# define MDCAS02_VALUE 0xAAAAAAAA /* 0x0c MDCAS02 */
# define MSC0_VALUE 0x63726372 /* 0x10 MCS0 */
# define MSC1_VALUE 0x2225fff9 /* 0x14 MCS1 */
# define MECR_VALUE 0x21082108 /* 0x18 MECR 8-state Acces IO/Attr/Mem FAST = off (both Slots)*/
# define MDREFR_VALUE DO_NOT_USE_THIS_VALUE__GETS_AUTOMAGICALLY_COMPUTED
# define MDCAS20_VALUE 0xAAAAAA9F /* 0x20 MDCAS20 */
# define MDCAS21_VALUE 0xAAAAAAAA /* 0x24 MDCAS21 */
# define MDCAS22_VALUE 0xAAAAAAAA /* 0x28 MDCAS22 */
# define MSC2_VALUE 0xfff8fff8 /* 0x2C MCS2 */
# define SMCNFG_VALUE 0x00000000 /* 0x30 SMCNFG No SROM*/
#endif
#endif
|
