Re: [Bitpim-devel] Re: Re: com/modem port detection

[Stephen W. <sa...@us...>]

On Mon, 2004-01-19 at 16:35, Adit Panchal wrote:

> Protocol log when I try to browse the file system of my SCP-5500:
> ...
> <#! p_sanyo.firmwarerequest !#>
> 00000000 00                                                  .
> 
> 15:30:25.151 SCP-8100: sanyo phonebook response Data - 55 bytes
> <#! p_sanyo.firmwareresponse !#>
> 00000000 00 4f 63 74 20 33 30 20 32 30 30 33 31 36 3a 31     .Oct 30 
> 200316:1
> 00000010 33 3a 31 33 46 65 62 20 31 37 20 32 30 30 33 30     3:13Feb 17 
> 20030
> 00000020 39 3a 30 30 3a 30 30 53 43 50 35 35 30 30 20 6a 
> 9:00:00SCP5500 j
> 00000030 06 16 b8 01 02 f0 53                                ......S
> ...

The cause of this exception has been found.  It turns out that the 5500
returns a smaller firmware version packet than other Sanyo phones.  I
have made a change that will get past this.  Either the phone book read
will work or quickly fail on yet another difference.  When 0.7 test 2
comes out, give it a try again.  (If you are setup to run from the CVS
version, email me for a patch.  The public CVS hasn't caught up with my
change yet.)

> I hope this helps. I was using BitPim 0.7-test1 using a Gomadic USB 
> cable. I also wanted to add that I tried importing the phone book from 
> my dad's SCP-5300 and it works fine. It does not however import the 
> pictures or ringers.

Thanks for testing the 5300.  I thought it should work, but didn't know
for sure.  There is no picture or ringer code for Sanyo phones.

Could you try reading or writing the calendar on the 5300?  That
"should" also work, but again, I don't really know for sure.

	Stephen