Menu
▾
▴
Re: [BitPim-user] connecting to the cdm9950sp/vm4450
|
From: Daniel S. <da...@Sy...> - 2011-07-22 03:10:39
|
Hi, I'm a member of plugdev and I don't have any problem when I plug a usb device such as a thumbdrive or others. Here are the answers to your questions. Thanks again, Daniel sudo tail -f /var/log/messages: ____________________________________________________________________ Jul 21 19:55:13 Gardel kernel: imklog 4.6.4, log source = /proc/kmsg started. Jul 21 19:55:13 Gardel rsyslogd: [origin software="rsyslogd" swVersion="4.6.4" x-pid="5667" x-info="http://www.rsyslog.com"] (re)start Jul 21 19:55:13 Gardel rsyslogd: rsyslogd's groupid changed to 103 Jul 21 19:55:13 Gardel rsyslogd: rsyslogd's userid changed to 101 ____________________________________________________________________ sudo lsusb: ____________________________________________________________________ Bus 005 Device 004: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard Receiver Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ____________________________________________________________________ cat /lib/udev/rules.d/40-bitpim.rules ____________________________________________________________________ ACTION=="add", ATTR{idProduct}=="0232", ATTR{idVendor}=="6547", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="0701", ATTR{idVendor}=="0474", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="071f", ATTR{idVendor}=="0474", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="0743", ATTR{idVendor}=="0474", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="0745", ATTR{idVendor}=="0474", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="10c5", ATTR{idVendor}=="10ab", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="2003", ATTR{idVendor}=="0731", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="2101", ATTR{idVendor}=="106c", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="2303", ATTR{idVendor}=="067b", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="2a22", ATTR{idVendor}=="22b8", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="2a62", ATTR{idVendor}=="22b8", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="2a64", ATTR{idVendor}=="22b8", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="3100", ATTR{idVendor}=="05c6", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="4902", ATTR{idVendor}=="22b8", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="6000", ATTR{idVendor}=="1004", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="6001", ATTR{idVendor}=="0403", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="6601", ATTR{idVendor}=="04e8", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ACTION=="add", ATTR{idProduct}=="6640", ATTR{idVendor}=="04e8", RUN +="/lib/udev/bpudev $env{DEVNAME} $number $sysfs{devnum}", ENV{REMOVE_CMD}="/lib/udev/bpudev --del $env{DEVNAME} $number $sysfs{devnum}" ___________________________________________________________________ groups: ___________________________________________________________________ daniel adm dialout fax cdrom floppy tape dip video plugdev fuse lpadmin admin sambashare ___________________________________________________________________ On Thu, 2011-07-21 at 19:19 -0700, D.J. wrote: > What do the following two commands produce when the phone is > connected? > > $ sudo tail -f /var/log/messages > > $ sudo lsusb > $ cat /lib/udev/rules.d/40-bitpim.rules > > $ groups > > Are you a member of the plugdev group? Do other usb devices work for > your user, i.e. thumb drives? I believe you have a permissions or > device problem as the phone is supported by bitpim (listed as the > Toshiba version). > > Good luck. ;-) > > --- On Thu, 7/21/11, Daniel Senderowicz <da...@Sy...> > wrote: > > From: Daniel Senderowicz <da...@Sy...> > Subject: Re: [BitPim-user] connecting to the cdm9950sp/vm4450 > To: bit...@li... > Cc: da...@bi... > Date: Thursday, July 21, 2011, 9:37 PM > > I did try to run as root, but no avail. > > My bitpim was installed through Synaptic (Ubuntu natty 11.04), > so I > assume that all the files should be there. However I wonder if > the > instructions you indicate are up to date and concurrent with > the way the > installation places the files. For example, there is > no /etc/udev/rules.d/60-bitpim.rules, but there > is /lib/udev/rules.d/40-bitpim.rules, also there is > no /usr/bin/bpudev, > but there is /lib/udev/bpudev and there is no "cellusers" > group. > > In any case, I'm wondering: when I plug the phone in, > shouldn't I see > some port automatically opened in /dev, even without running > bitpim? > > Many thanks for your time. Best regards, > > Daniel > > On Thu, 2011-07-21 at 18:10 -0700, D.J. wrote: > > Do you have permissions to the device? Have you tried > starting bitpim > > as su or a normal user? Did you setup permissions? > > > > http://www.bitpim.org/help/howto-linuxusb.htm > > > > Good luck. ;-) > > > > --- On Wed, 7/20/11, Daniel Senderowicz > <da...@Sy...> > > wrote: > > > > From: Daniel Senderowicz <da...@Sy...> > > Subject: Re: [BitPim-user] connecting to the > cdm9950sp/vm4450 > > To: bit...@li... > > Cc: da...@bi... > > Date: Wednesday, July 20, 2011, 1:59 PM > > > > Actually is loaded, what happens is that when I run > lsmod I > > have to " > > "grep" for cdc_acm instead of cdc-acm. However > bitpim is still > > unable to > > detect the phone. Any ideas? > > > > Thanks, > > > > Daniel > > > > On Wed, 2011-07-20 at 10:44 -0700, Daniel > Senderowicz wrote: > > > I did and apparently is succesful since no error > message > > comes out, but > > > when I run lsmod it does not show the cdc-acm. Is > there > > anything that I > > > should do? > > > > > > Thanks, > > > > > > Daniel > > > > > > On Tue, 2011-07-19 at 19:11 -0700, D.J. wrote: > > > > Have you tried actually modprobing the driver > instead of > > listing the > > > > module? > > > > > > > > As root or su issue: > > > > > > > > modprobe cdc-acm > > > > > > > > To check that it's loaded > > > > > > > > lsmod | grep cdc-acm > > > > > > > > Good luck. ;-) > > > > > > > > --- On Tue, 7/19/11, Daniel Senderowicz > > <da...@Sy...> > > > > wrote: > > > > > > > > From: Daniel Senderowicz > > <da...@Sy...> > > > > Subject: [BitPim-user] connecting to the > > cdm9950sp/vm4450 > > > > To: bit...@li... > > > > Cc: da...@bi... > > > > Date: Tuesday, July 19, 2011, 6:08 PM > > > > > > > > Hi, > > > > > > > > Sorry if this was already answered but > I'm new to > > the list. > > > > I'm trying > > > > to retrieve some pictures from an old > phone > > Audiovox > > > > cdm9950sp. I set > > > > the port to "auto" mode but the programs > says that > > it "failed" > > > > detecting > > > > the phone. I read that I need to have > the module > > cdc-acm.ko > > > > loaded in > > > > the kernel. If I do: > > > > > > > > $ modprobe -l | grep acm > > > > > > > > y get: > > > > > > > > kernel/drivers/usb/class/cdc-acm.ko > > > > > > > > So I do I go from here? > > > > > > > > Many thanks in advance. > > > > > > > > Daniel > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > Magic Quadrant for Content-Aware Data > Loss > > Prevention > > > > Research study explores the data loss > prevention > > market. > > > > Includes in-depth > > > > analysis on the changes within the DLP > market, and > > the > > > > criteria used to > > > > evaluate the strengths and weaknesses of > these DLP > > solutions. > > > > > http://www.accelacomm.com/jaw/sfnl/114/51385063/ > > > > > _______________________________________________ > > > > BitPim-user mailing list > > Bit...@li... > > > > Unsubscribe or change options at > > > > > > > https://lists.sourceforge.net/lists/listinfo/bitpim-user > > > > > > > > There are several hundred people on this > list. > > Please be > > > > courteous, on topic and follow the > instructions > > before posting > > > > http://www.bitpim.org/help/support.htm > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > 10 Tips for Better Web Security > > > > Learn 10 ways to better secure your business > today. Topics > > covered include: > > > > Web security, SSL, hacker attacks & Denial of > Service > > (DoS), private keys, > > > > security Microsoft Exchange, secure Instant > Messaging, and > > much more. > > > > http://www.accelacomm.com/jaw/sfnl/114/51426210/ > > > > _______________________________________________ > > BitPim-user mailing list > Bit...@li... > > Unsubscribe or change options at > > > https://lists.sourceforge.net/lists/listinfo/bitpim-user > There > > are several hundred people on this list. Please be > courteous, > > on topic and follow the instructions before posting > > http://www.bitpim.org/help/support.htm > > > > > > > > > ------------------------------------------------------------------------------ > > > 10 Tips for Better Web Security > > > Learn 10 ways to better secure your business > today. Topics > > covered include: > > > Web security, SSL, hacker attacks & Denial of > Service (DoS), > > private keys, > > > security Microsoft Exchange, secure Instant > Messaging, and > > much more. > > > http://www.accelacomm.com/jaw/sfnl/114/51426210/ > > > _______________________________________________ > > > BitPim-user mailing list > Bit...@li... > > > Unsubscribe or change options at > > > > https://lists.sourceforge.net/lists/listinfo/bitpim-user > > > > > > There are several hundred people on this list. > Please be > > > courteous, on topic and follow the instructions > before > > posting > > > http://www.bitpim.org/help/support.htm > > > > > ------------------------------------------------------------------------------ > > 10 Tips for Better Web Security > > Learn 10 ways to better secure your business today. > Topics > > covered include: > > Web security, SSL, hacker attacks & Denial of > Service (DoS), > > private keys, > > security Microsoft Exchange, secure Instant > Messaging, and > > much more. > > http://www.accelacomm.com/jaw/sfnl/114/51426210/ > > _______________________________________________ > > BitPim-user mailing list > Bit...@li... > > Unsubscribe or change options at > > > https://lists.sourceforge.net/lists/listinfo/bitpim-user > > > > There are several hundred people on this list. > Please be > > courteous, on topic and follow the instructions > before posting > > http://www.bitpim.org/help/support.htm > > > > > ------------------------------------------------------------------------------ > > 10 Tips for Better Web Security > > Learn 10 ways to better secure your business today. Topics > covered include: > > Web security, SSL, hacker attacks & Denial of Service (DoS), > private keys, > > security Microsoft Exchange, secure Instant Messaging, and > much more. > > http://www.accelacomm.com/jaw/sfnl/114/51426210/ > > _______________________________________________ BitPim-user > mailing list Bit...@li... Unsubscribe or > change options at > https://lists.sourceforge.net/lists/listinfo/bitpim-user There > are several hundred people on this list. Please be courteous, > on topic and follow the instructions before posting > http://www.bitpim.org/help/support.htm > > ------------------------------------------------------------------------------ > 10 Tips for Better Web Security > Learn 10 ways to better secure your business today. Topics > covered include: > Web security, SSL, hacker attacks & Denial of Service (DoS), > private keys, > security Microsoft Exchange, secure Instant Messaging, and > much more. > http://www.accelacomm.com/jaw/sfnl/114/51426210/ > _______________________________________________ > BitPim-user mailing list Bit...@li... > Unsubscribe or change options at > https://lists.sourceforge.net/lists/listinfo/bitpim-user > > There are several hundred people on this list. Please be > courteous, on topic and follow the instructions before posting > http://www.bitpim.org/help/support.htm > > ------------------------------------------------------------------------------ > 10 Tips for Better Web Security > Learn 10 ways to better secure your business today. Topics covered include: > Web security, SSL, hacker attacks & Denial of Service (DoS), private keys, > security Microsoft Exchange, secure Instant Messaging, and much more. > http://www.accelacomm.com/jaw/sfnl/114/51426210/ > _______________________________________________ BitPim-user mailing list Bit...@li... Unsubscribe or change options at https://lists.sourceforge.net/lists/listinfo/bitpim-user There are several hundred people on this list. Please be courteous, on topic and follow the instructions before posting http://www.bitpim.org/help/support.htm |
