Re: [BitPim-devel] Questions regarding support for LG VX-5400

[Sean P. B. <sea...@gm...>]

The 8610 and 5400 are both supported by the most recent test build of  
Bitpim.   If the phones support a bluetooth connection, then you  
should probably be able to connect to them.

Hope this helps,

Sean
--
Sean Patrick Burke
Full time law student, part time developer
http://www.bitpim.org




On Jan 30, 2009, at 2:49 PM, MBR wrote:

> I just looked for the LG VX-5400 in the navigation tree at http://www.bitpim.org/help 
> , and couldn't find it listed.  But a series of emails in this group  
> from 11/18/2007 (Subject: Newly released VX5400 appears to be  
> similar to Bitpim's LG-VX8550) through 1/7/2008 (Subject: VX5400 / 
> pim/pbnumber.dat caller-id lookup problem) seem to indicate that  
> work was being done on this model, and that it was similar to the  
> VX-8550.  http://www.bitpim.org/help warns:
> My phone is not in the list
>
> You should select your exact phone in the list, ...
>
> Picking "similar" phones means you are experimenting and could end  
> up with problems such as your phone locking up with a worst case of  
> it becoming completely inoperable.
> So I don't want to try a similar but not identical model number.   
> And I don't know what to infer from the fact that neither the LG  
> VX-5400 nor the LG VX-8550 is listed at http://www.bitpim.org/help.
>
> It could mean that the development discussed in the aforementioned  
> series of emails was abandoned because someone decided the phone  
> simply couldn't be properly supported.  Or it could mean that those  
> models are supported but nobody ever got around to writing the  
> documentation.
>
> Does anyone know whether I can safely use BitPim with an LG  
> VX-5400?  If so, does it know the phone by that name, by the name  
> VX-8550, or what?
> Mark Rosenthal
> mb...@ar...
>
> -------- Original Message --------
> Subject:	Re: [BitPim-devel] VX5400 /pim/pbnumber.dat caller-id  
> lookup problem
> Date:	Tue, 8 Jan 2008 00:04:52 GMT
> From:	Joe Pham <dj...@ne...>
> Reply-To:	bit...@li...
> To:	bit...@li...
>
> >caller-id lookup on the VX5400 with Bitpim version 1.04 official is
> >now working correctly.
>
> Thanks for the testing and the feedback.
>
> -Joe Pham
>
> ------------------------------------------------------------------------------
> This SF.net email is sponsored by:
> SourcForge Community
> SourceForge wants to tell your story.
> http://p.sf.net/sfu/sf-spreadtheword_______________________________________________
> BitPim-devel mailing list
> Bit...@li...
> https://lists.sourceforge.net/lists/listinfo/bitpim-devel