bitpim-devel

[BitPim-devel] BitPim Official Release 1.0.6 available

[Joe P. <dj...@ne...>]

Grab it from:

<http://sourceforge.net/project/showfiles.php?group_id=75211&package_id=75636&release_id=620234>

Changes in this release:

    * Bug fix: LG VX-8800/10000 Note Pad.
    * Improvement: LG AX-8600 Call History and Note Pad (patch submitted by
      David Ritter).
    * Bug fix: LG VX-8500/8800/10000: better BREW file access (i.e. fewer "file
      block" errors).
    * Bug fix: LG VX-9900: access to the mmc1 dir via Command Line Interface
      (CLI).
    * Bug fix: Motorola: BitPim failed to read phonebook from some Motorola
      models.
    * Improvement: Call History: Navigate to other subtrees.
    * Bug fix: SCP-6650: Fix Katana-II phone/port detection
    * Add "extrazero" fields to listfile and listdirectory responses so that
      filesystem view will work for Samsung SPHA-900. May break filesystem view
      for other phones.
    * New phone support: Sanyo SCP-8400
    * New phone support: LG VX-9100 (enV2)
    * Bug fix: Can't view Data Recording files on non-Intel Mac.
    * Bug fix: Correctly process BREW special files.
    * New phone support: LG VX-8560
    * New Phone support: LG VX-9700
    * New Phone support: LG VX-8610
    * Bug fix: LG VX-9900 SMS support.
    * Bug fix: Sanyo SCP-7500. Correctly read date on Sent messages.
    * Maintenance: Upgrade build script.
    * New phone support: LG LX-570 (Musiq) (Initial)
    * Bug fix: Support for the LG VX-8800 V4, LG VX-8550 V4, and LG VX-10000
      V9.
    * Bug fix: Calendar Import Filter dialog raised exception.
    * Improvement: In the Get Data from Phone and Send Data to Phone dialog,
      clicking on either the Add or Replace All selection of a row will also
      enable that row.
    * Improvement: Edit PhoneBook Entry dialog: add/edit ICE setting.
    * Bug fix: LG VX-8350, LG VX-8550: failed to read/write large files.


____________________________________________________________
Looking for insurance? Compare and save today. Click here.
http://thirdpartyoffers.netzero.net/TGL2231/fc/Ioyw6ijmN4LBVhRFV8DhkJRWyElzdQLvuYvJBwSOuWkuyDBCrO1mIk/

[BitPim-devel] BitPim Official Release 1.0.6 Katana Problem

[Don L. <dl...@la...>]

I have a Sanyo Katana SCP-6600.  When trying to read the data from the phone I recieve an error.

SCP-6600 on COM5: The phone is not responding while transitioning mode from none to phonebook.  See Trouble shooting tips.

I can query the modem successfully through the Device Manager.

I have powered the phone down, removed the battery, disconnected and reconnected the cable several times.  Nothing seems to help.

I did notice in the release notes there was a bug fix for the SCP-6650 could that have an effect on this model?

Suggestions?

Don L.

Re: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem

[Don L. <dl...@la...>]

Additionally, I have been able to connect and read data from this phone with DataPilot.

Don L.

-----Original Message-----
From: bit...@li...
[mailto:bit...@li...]On Behalf Of Don
Lewis
Sent: Tuesday, August 19, 2008 9:39 AM
To: bit...@li...
Subject: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem


I have a Sanyo Katana SCP-6600.  When trying to read the data from the phone I recieve an error.

SCP-6600 on COM5: The phone is not responding while transitioning mode from none to phonebook.  See Trouble shooting tips.

I can query the modem successfully through the Device Manager.

I have powered the phone down, removed the battery, disconnected and reconnected the cable several times.  Nothing seems to help.

I did notice in the release notes there was a bug fix for the SCP-6650 could that have an effect on this model?

Suggestions?

Don L.

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
BitPim-devel mailing list
Bit...@li...
https://lists.sourceforge.net/lists/listinfo/bitpim-devel

Re: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem

[Stephen W. <bi...@gm...>]

I will look into this.

In the meantime, make sure that BitPim is using the same port that DataPilot
uses.  I believe that the driver creates two COM ports for this phone and
perhaps only the detection of which port to use for the Katana got messed up
in 1.06.

Stephen

On Tue, Aug 19, 2008 at 1:03 PM, Don Lewis <dl...@la...> wrote:
> Additionally, I have been able to connect and read data from this phone
with DataPilot.
>
> Don L.
>
> -----Original Message-----
> From: bit...@li...
> [mailto:bit...@li...]On Behalf Of Don
> Lewis
> Sent: Tuesday, August 19, 2008 9:39 AM
> To: bit...@li...
> Subject: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem
>
>
> I have a Sanyo Katana SCP-6600.  When trying to read the data from the
phone I recieve an error.
>...

Re: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem

[Don L. <dl...@la...>]

Thank you Stephen, will post if that solves the issue.
 
Don L.

-----Original Message-----
From: bit...@li... [mailto:bit...@li...]On Behalf Of Stephen Wood
Sent: Tuesday, August 19, 2008 1:53 PM
To: bit...@li...
Subject: Re: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem


I will look into this.

In the meantime, make sure that BitPim is using the same port that DataPilot uses.  I believe that the driver creates two COM ports for this phone and perhaps only the detection of which port to use for the Katana got messed up in 1.06.

Stephen

On Tue, Aug 19, 2008 at 1:03 PM, Don Lewis < dl...@la...> wrote:
> Additionally, I have been able to connect and read data from this phone with DataPilot.
>
> Don L.
>
> -----Original Message-----
> From: bit...@li...
> [mailto: bit...@li...]On Behalf Of Don
> Lewis
> Sent: Tuesday, August 19, 2008 9:39 AM
> To: bit...@li...
> Subject: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem
>
>
> I have a Sanyo Katana SCP-6600.  When trying to read the data from the phone I recieve an error.
>...

Re: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem

[Stephen W. <bi...@gm...>]

I tested BitPim 1.0.6 on both Linux and Windows (XP) with the Katana
(6600).  On both systems BitPim was able to detect the phone at the correct
port and download the phonebook.

On Windows I installed the Sprint Connection manager to get the phone
drivers.  I am pretty sure that I have tried DataPilot drivers with this
phone before.

Stephen

On Tue, Aug 19, 2008 at 4:11 PM, Don Lewis <dl...@la...> wrote:

>  Thank you Stephen, will post if that solves the issue.
>
> Don L.
>
> -----Original Message-----
> *From:* bit...@li... [mailto:
> bit...@li...]*On Behalf Of *Stephen Wood
> *Sent:* Tuesday, August 19, 2008 1:53 PM
> *To:* bit...@li...
> *Subject:* Re: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem
>
> I will look into this.
>
> In the meantime, make sure that BitPim is using the same port that
> DataPilot uses.  I believe that the driver creates two COM ports for this
> phone and perhaps only the detection of which port to use for the Katana got
> messed up in 1.06.
>
> Stephen
>
> On Tue, Aug 19, 2008 at 1:03 PM, Don Lewis <dl...@la...> wrote:
> > Additionally, I have been able to connect and read data from this phone
> with DataPilot.
> >
> > Don L.
> >
> > -----Original Message-----
> > From: bit...@li...
> > [mailto:bit...@li...]On Behalf Of Don
> > Lewis
> > Sent: Tuesday, August 19, 2008 9:39 AM
> > To: bit...@li...
> > Subject: [BitPim-devel] BitPim Official Release 1.0.6 Katana Problem
> >
> >
> > I have a Sanyo Katana SCP-6600.  When trying to read the data from the
> phone I recieve an error.
> >...
>
>
>

Re: [BitPim-devel] BitPim Official Release 1.0.6 available

[ststephen <mf...@ya...>]

Hi, 

I have an LG VX-8560 - I installed bitpim 1.0.6 and tried to upload my MP3
ringtone - I was able to copy it to the /ringers folder, but after rebooting
the phone it doesn't find the new ringtone. 

Did I put it in the right folder?  In a video for the vx8500 it referenced
the /brew/[number] folder, which seems not to exist on the 8560.

Any tips appreciated, thanks.



Joe Pham wrote:
> 
> 
> Changes in this release:
> 
>  
>     * New phone support: LG VX-8560
> 
>  
-- 
View this message in context: http://www.nabble.com/BitPim-Official-Release-1.0.6-available-tp19016193p19073604.html
Sent from the Bitpim - Dev mailing list archive at Nabble.com.

Re: [BitPim-devel] BitPim Official Release 1.0.6 available

[Nathan H. <hj...@ma...>]

You need to put the ringtone in /brew/mod/10889/ringtones in order for  
the phone to see the new ringtone.

-Nathan Hjelm

On Aug 20, 2008, at 10:47 AM, ststephen wrote:

>
> Hi,
>
> I have an LG VX-8560 - I installed bitpim 1.0.6 and tried to upload  
> my MP3
> ringtone - I was able to copy it to the /ringers folder, but after  
> rebooting
> the phone it doesn't find the new ringtone.
>
> Did I put it in the right folder?  In a video for the vx8500 it  
> referenced
> the /brew/[number] folder, which seems not to exist on the 8560.
>
> Any tips appreciated, thanks.
>
>
>
> Joe Pham wrote:
>>
>>
>> Changes in this release:
>>
>>
>>    * New phone support: LG VX-8560
>>
>>
> -- 
> View this message in context: http://www.nabble.com/BitPim-Official-Release-1.0.6-available-tp19016193p19073604.html
> Sent from the Bitpim - Dev mailing list archive at Nabble.com.
>
>
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's  
> challenge
> Build the coolest Linux based applications with Moblin SDK & win  
> great prizes
> Grand prize is a trip for two to an Open Source event anywhere in  
> the world
> http://moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> BitPim-devel mailing list
> Bit...@li...
> https://lists.sourceforge.net/lists/listinfo/bitpim-devel