binarycloud-dev

Re: [binarycloud-dev] Problems getting Binarycloud to runoffofWin2k

[Juergen W. <jue...@we...>]

Hi, 
>"Cannot find server or DNS error"....maybe I should give up?!
I'm not sure, how this works on W2k, but on WinNT4 you must either set
up your machine as a DNS Server (which, at least with the workstation
isn't possible AFAIK), or you make entries in your hosts and/or lmhosts
file (this, in WinNT4 is in directory WINT\system32\drivers\etc) so
Windows can resolve your server name. This is also for virtual host, so
if you have entries like

<virtualhost 127.0.0.1>
	ServerName localhost
	DocumentRoot "d:/mylocalhome"
</virtualhost>
<virtualhost 127.0.0.1>
	ServerName bcathome
	DocumentRoot "d:/binarycloud/htdocs"
</virtualhost>

in your http.conf
you must set the corresponding 

127.0.0.1	localhost
127.0.0.1	bcathome

in your hosts. Then you can call the pages with http://bcathome/
Keep in mind, that you now cannot simply use http://127.0.0.1/ anymore,
cause it is connected with different virtual hosts. You this way have to
use the associated names.
Juergen

Re: [binarycloud-dev] Problems getting Binarycloud to runoffofWin2k

[Peter B. <re...@f2...>]

At 12:09 PM 4/27/01 +0200, you wrote:

>127.0.0.1       localhost
>127.0.0.1       bcathome
>
>in your hosts. Then you can call the pages with http://bcathome/
>Keep in mind, that you now cannot simply use http://127.0.0.1/ anymore,
>cause it is connected with different virtual hosts. You this way have to
>use the associated names.

For those of you unfamiliar with this, perhaps I'd better expand.  In your 
C:\Windows directory is a file called Hosts.sam.  This file needs to be 
renamed to Hosts, and any virtual hosts created need their IP and name 
entered, as shown above.

This was my problem when trying to install Binarycloud.
HTH,
Peter.


-oOo-
Maple Design - web design, hosting, domain names
http://www.mapledesign.co.uk
-oOo-

Re: [binarycloud-dev] Problems getting Binarycloud to runoffofWin2k

[Henry C. <hen...@ya...>]

Im wiping my win2k server install for SuSe Linux 7.1 Professional....Hope
the install will be a breeze as opposed to the hassle I had with
Wintel..Keep yall posted and will submit for advise if I run into problems



on 4/27/01 10:59 AM, Peter Bowyer at re...@f2... wrote:

> At 12:09 PM 4/27/01 +0200, you wrote:
> 
>> 127.0.0.1       localhost
>> 127.0.0.1       bcathome
>> 
>> in your hosts. Then you can call the pages with http://bcathome/
>> Keep in mind, that you now cannot simply use http://127.0.0.1/ anymore,
>> cause it is connected with different virtual hosts. You this way have to
>> use the associated names.
> 
> For those of you unfamiliar with this, perhaps I'd better expand.  In your
> C:\Windows directory is a file called Hosts.sam.  This file needs to be
> renamed to Hosts, and any virtual hosts created need their IP and name
> entered, as shown above.
> 
> This was my problem when trying to install Binarycloud.
> HTH,
> Peter.
> 
> 
> -oOo-
> Maple Design - web design, hosting, domain names
> http://www.mapledesign.co.uk
> -oOo-
> 
> 
> _______________________________________________
> binarycloud-dev mailing list
> bin...@li...
> http://lists.sourceforge.net/lists/listinfo/binarycloud-dev
> 


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

Re: [binarycloud-dev] Problems getting Binarycloud torunoffofWin2k

[alex b. <en...@tu...>]

heh,

you'll like the linux install a helluvuh lot more than win :)

_a

----- Original Message -----
From: "Henry Cavillones" <hen...@ya...>
To: "binarycloud dev lists.sourceforge.net"
<bin...@li...>
Sent: Monday, April 30, 2001 6:36 PM
Subject: Re: [binarycloud-dev] Problems getting Binarycloud torunoffofWin2k


> Im wiping my win2k server install for SuSe Linux 7.1 Professional....Hope
> the install will be a breeze as opposed to the hassle I had with
> Wintel..Keep yall posted and will submit for advise if I run into problems
>
>
>
> on 4/27/01 10:59 AM, Peter Bowyer at re...@f2... wrote:
>
> > At 12:09 PM 4/27/01 +0200, you wrote:
> >
> >> 127.0.0.1       localhost
> >> 127.0.0.1       bcathome
> >>
> >> in your hosts. Then you can call the pages with http://bcathome/
> >> Keep in mind, that you now cannot simply use http://127.0.0.1/ anymore,
> >> cause it is connected with different virtual hosts. You this way have
to
> >> use the associated names.
> >
> > For those of you unfamiliar with this, perhaps I'd better expand.  In
your
> > C:\Windows directory is a file called Hosts.sam.  This file needs to be
> > renamed to Hosts, and any virtual hosts created need their IP and name
> > entered, as shown above.
> >
> > This was my problem when trying to install Binarycloud.
> > HTH,
> > Peter.
> >
> >
> > -oOo-
> > Maple Design - web design, hosting, domain names
> > http://www.mapledesign.co.uk
> > -oOo-
> >
> >
> > _______________________________________________
> > binarycloud-dev mailing list
> > bin...@li...
> > http://lists.sourceforge.net/lists/listinfo/binarycloud-dev
> >
>
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
> _______________________________________________
> binarycloud-dev mailing list
> bin...@li...
> http://lists.sourceforge.net/lists/listinfo/binarycloud-dev
>

Re: [binarycloud-dev] Problems getting Binarycloud to runoffofWin2k

[Robert W. <rob...@fr...>]

Henry Cavillones wrote:

> Im wiping my win2k server install for SuSe Linux 7.1 Professional....

Nice to hear that another computer's about to have its life improved  by 
having Windows exorcised.

> Hope
> the install will be a breeze as opposed to the hassle I had with
> Wintel..

I've always found that Linux installs are easier than Windows ones-- as 
long as you don't have any strange hardware.  Winmodems, onboard sound 
cards (esp the ones on cheap motherboards), and of course USB devices 
(though that's now much improved :-)) have caused me problems.  If you 
haven't already done so, check the hardware compatability lists.

-Rob

> Keep yall posted and will submit for advise if I run into problems

> 
> on 4/27/01 10:59 AM, Peter Bowyer at re...@f2... wrote:
> 
>> At 12:09 PM 4/27/01 +0200, you wrote:
>> 
>>> 127.0.0.1       localhost
>>> 127.0.0.1       bcathome
>>> 
>>> in your hosts. Then you can call the pages with http://bcathome/
>>> Keep in mind, that you now cannot simply use http://127.0.0.1/ anymore,
>>> cause it is connected with different virtual hosts. You this way have to
>>> use the associated names.
>> 
>> For those of you unfamiliar with this, perhaps I'd better expand.  In your
>> C:\Windows directory is a file called Hosts.sam.  This file needs to be
>> renamed to Hosts, and any virtual hosts created need their IP and name
>> entered, as shown above.
>> 
>> This was my problem when trying to install Binarycloud.
>> HTH,
>> Peter.
>> 
>> 
>> -oOo-
>> Maple Design - web design, hosting, domain names
>> http://www.mapledesign.co.uk
>> -oOo-
>> 
>> 
>> _______________________________________________
>> binarycloud-dev mailing list
>> bin...@li...
>> http://lists.sourceforge.net/lists/listinfo/binarycloud-dev
>> 
> 
> 
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> 
> 
> _______________________________________________
> binarycloud-dev mailing list
> bin...@li...
> http://lists.sourceforge.net/lists/listinfo/binarycloud-dev

Re: [binarycloud-dev] Problems getting Binarycloud to run offofWin2k

[Henry C. <hen...@ya...>]

on 4/25/01 7:46 AM, abidal at ab...@ip... wrote:

> This problem are not realy  relate to win.
> 
>> Check that...I got it to parse the index.php file once I dropped the
>> number
>> "4" off of the string "AddType application/x-httpd-php(4) .php"...but
> 
> You now have a working apache with php
> 
>> I'm
>> noe getting the old "Warning: Failed opening 'BASEtmpl/template.class'
>> for
>> inclusion (include_path='') in c:/program files/apache
>> group/apache/htdocs/htdocs/index.php on line 27
>> 
> 
> Good, It's means now  that  prepend is not set the right way
> 
> If you set the prepend, you will get a blank page.
> 
> At this point, there are some other thing to check.
> 
> 
> // be shure to remove space at the end of the following page.
 Do you mean a space in their title or within the page itself?
> core/base/permissions.php
> core/lib/bread_crumbs_and_tabs.lib
> user/conf/defined_constants.conf
> user/conf/file_permissions.conf
> user/conf/predend.inc
> 
I cant seem to find this string you speak of...could it have been removed
with the new r1b version
> //in user/conf/defined_constants.conf  change
> $_PHP_SELF = str_replace  .... ;
> with $_PHP_SELF = $PHP_SELF;
> 
> // be shure that php is configure to work with mysql or you will get a
> blank page too
I know it is because currently I am running a webforum that uses mysql to
store the forums data
> 
BTW.. After checking all of this Im still getting a blank page...Do I have
to make the BC "htdocs" directory a virtual directory in httpd.conf?
> 
> --
> IPSIGHT NETWORKS -  www.ipsight.com
> Abidal Serge   ab...@ip...
> Phone (+33)  1 45 40 91 51 - Fax   (+33)  1 45 40 85 45
> 
> _______________________________________________
> binarycloud-dev mailing list
> bin...@li...
> http://lists.sourceforge.net/lists/listinfo/binarycloud-dev
> 


_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com