my `unsupported ROM' problem occured because I erroneously assumed the RO=
M's size is 1MB.
This was because my ROM extractor always reads 2MB and the IIci ROM image=
file contains junk in
every 2nd 512KB block.
But V1.0 still crashes.
So I went back to V0.9 and Basilisk II boots fine.
But I can't change the error sound, can't use AppleTalk, and can't set th=
There are probably other problems which I haven't found yet.
I think this could be a PRAM problem.
But I can't go to V1.0 because it crashes:
Basilisk II V1.0 by Christian Bauer et al.
Reading ROM file...
Using /dev/dsp audio output
do_handle_screen_fault: unhandled address 0x446a4700 [IP=3D0x80a414e]
D0: 00000000 D1: fffcffff D2: fffffffc D3: 0000000f
D4: 0003fffc D5: 00000000 D6: 00000012 D7: 00000000
A0: 0000007c A1: 00000002 A2: 00006658 A3: 00006a6c
A4: 0000624c A5: 04291700 A6: 00000000 A7: 020009ae
USP=3D00000000 ISP=3D020009ae MSP=3D00000000 VBR=3D00000000
T=3D00 S=3D1 M=3D0 X=3D1 N=3D1 Z=3D0 V=3D0 C=3D0 IMASK=3D0
FP0: 0 FP1: 0 FP2: 0 FP3: 0
FP4: 0 FP5: 0 FP6: 0 FP7: 0
N=3D0 Z=3D0 I=3D0 NAN=3D0
0402e8e8: 2815 28c4 c081 c284 8287 MOVE.L (A5),D4
next PC: 0402e8ea
Thank you for your patience, sorry for the noise,
Certify your minority, support spyware!
Soon to come as TCPA and Palladium from Microsoft & Co.
Get latest updates about Open Source Projects, Conferences and News.