Re: [Bashburn-info] Copy Data CD to CD Issues
Brought to you by:
bashburn
Menu
▾
▴
Re: [Bashburn-info] Copy Data CD to CD Issues
|
From: Nick W. <ni...@uk...> - 2008-10-03 00:23:35
|
On Fri, 03 Oct 2008 02:13:26 +0200 Anders Lindén <and...@gm...> wrote: > fre 2008-10-03 klockan 00:53 +0100 skrev Nick Warne: > > On Thu, 2 Oct 2008 17:05:22 -0400 (EDT) > > "Steven W. Orr" <st...@sy...> wrote: > > > > > On Thursday, Oct 2nd 2008 at 15:53 -0000, quoth Nick Warne: > > > > > > =>> OK, this breaks real bad. Nothing happens now at all. > > > =>> > > > =>> Output below. > > > =>> > > > =>> Nick > > > =>> > > > =>> ====== > > > =>> > > > =>> |-(Data Menu) > > > =>> | 0) Burn Data > > > =>> | 1) Copy Data CD (CD to CD) > > > =>> | 2) Burn Data DVD > > > =>> | 3) Format CDRW > > > =>> | 4) Format DVD > > > =>> | 5) Back > > > =>> | > > > =>> Your Choice? [0-5] |> 1 > > > =>> Warning: creating filesystem that does not conform to > > > ISO-9660. =>> Setting input-charset to 'ISO-8859-1' from locale. > > > =>> Cdrecord-ProDVD-ProBD-Clone 2.01.01a38 (i686-pc-linux-gnu) > > > Copyright =>> (C) 1995-2008 J?rg Schilling TOC Type: 1 = CD-ROM > > > =>> scsidev: '/dev/cdrom' > > > =>> devname: '/dev/cdrom' > > > =>> scsibus: -2 target: -2 lun: -2 > > > =>> Warning: Open by 'devname' is unintentional and not supported. > > > =>> Linux sg driver version: 3.5.27 > > > =>> Using libscg version 'schily-0.9'. > > > =>> SCSI buffer size: 64512 > > > =>> atapi: 1 > > > =>> Device type : Removable CD-ROM > > > =>> Version : 0 > > > =>> Response Format: 2 > > > =>> Capabilities : > > > =>> Vendor_info : 'TSSTcorp' > > > =>> Identifikation : 'CDDVDW SH-S202J ' > > > =>> Revision : 'SB00' > > > =>> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. > > > =>> Current: CD-R > > > =>> Profile: DVD-R/DL sequential recording > > > =>> Profile: DVD-R/DL layer jump recording > > > =>> Profile: DVD+R/DL > > > =>> Profile: DVD+R > > > =>> Profile: DVD+RW > > > =>> Profile: DVD-RW sequential recording > > > =>> Profile: DVD-RW restricted overwrite > > > =>> Profile: DVD-RAM > > > =>> Profile: DVD-R sequential recording > > > =>> Profile: DVD-ROM > > > =>> Profile: CD-RW > > > =>> Profile: CD-R (current) > > > =>> Profile: CD-ROM > > > =>> Profile: Removable Disk > > > =>> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > > > =>> Driver flags : MMC-3 SWABAUDIO BURNFREE > > > =>> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 > > > RAW/R96P =>> RAW/R96R Drive buf size : 1962752 = 1916 KB > > > =>> CD copied! > > > =>> rm: cannot remove `/home/nick/burn/BashBurn.iso': No such > > > file or =>> directory > > > => > > > =>Steve, I reverted some of this. As my svn log says, I rather > > > have a =>working version... > > > => > > > =>It is working again now. > > > > > > I think I found the problem. mkisofs writes to stdout if there's > > > no -o option. That works fine. But cdrecord reads from its > > > command line arg. If its commandline arg is - (a dash) then it > > > reads from stdin. This should fix it. > > > > > > Also, in the elseif that deals with only a single reader/writer, > > > it was only deleting the BashBurn.iso file if the burn succeeded. > > > That is now fixed as well. > > > > > > > Good stuff - seems to work fine now - but I did get a funny burn > > this time with stop/start breaks and a warning about underruns: > > > > > > Waiting for reader process to fill input buffer ... input buffer > > ready. BURN-Free is OFF. > > Performing OPC... > > Starting new track at sector: 0 > > Track 01: 5 MB written (fifo 98%) [buf 26%] 7.3x. 18.44% > > done, estimate finish Fri Oct 3 00:46:56 2008 Track 01: 15 MB > > written (fifo 96%) [buf 93%] 20.1x. 36.88% done, estimate finish > > Fri Oct 3 00:45:53 2008 Track 01: 25 MB written (fifo 93%) > > [buf 0%] 8.1x. 55.27% done, estimate finish Fri Oct 3 00:45:25 > > 2008 Track 01: 35 MB written (fifo 93%) [buf 22%] 4.8x. > > 73.71% done, estimate finish Fri Oct 3 00:45:15 2008 Track 01: > > 45 MB written (fifo 92%) [buf 26%] 4.8x. 92.10% done, estimate > > finish Fri Oct 3 00:45:08 2008 Track 01: 48 MB written (fifo > > 100%) [buf 26%] 8.1x.Total translation table size: 0 Total > > rockridge attributes bytes: 305 Total directory bytes: 0 Path table > > size(bytes): 10 Track 01: 49 MB written (fifo 98%) [buf 45%] > > 9.7x.Max brk space used 0 27153 extents written (53 MB) Track 01: > > 53 MB written (fifo 100%) [buf 100%] 24.4x. Track 01: Total bytes > > read/written: 55609344/55609344 (27153 sectors). Writing time: > > 77.487s Min drive buffer fill was 0% Total of 7 possible drive > > buffer underruns predicted. Fixating... > > Fixating time: 19.593s > > cdrecord: fifo had 877 puts and 877 gets. > > cdrecord: fifo was 0 times empty and 235 times full, min fill was > > 81%. CD copied! > > > > > > > > Nick > > Shouldn't be a problem. Buffer underrun protection (burnfree) is > enabled automatically on all burners produced nowadays even if the > burnfree driver option isn't set. It's really just there for people > who for some reason want to turn it off. > I guess you get those warning because a straigh CD to CD copy without > creating a temporary ISO file will put a lot of load on the I/O > system. I see. It burnt fine though. I now have 16 'Orson Welles - Original War of the Worlds radio broadcast 1938' data CD's :-D Nick -- Free Software Foundation Associate Member 5508 |
