Re: [Bashburn-info] Copy Data CD to CD Issues

[Steven W. O. <st...@sy...>]

On Thursday, Oct 2nd 2008 at 15:53 -0000, quoth Nick Warne:

=>On Thu, 2 Oct 2008 20:42:56 +0100
=>Nick Warne <ni...@uk...> wrote:
=>
=>> > 
=>> > Instead of mount | grep to see if the cd is mounted, just
=>> > grep /etc/mtab. Also, I took out that mkisofs -o fn | cdrecord fn
=>> > construct. It was the same as cat zzz | cat zzz only worse. The
=>> > first cat (mkisofs) had a -o to specify an output filename. Then
=>> > the second cat (cdrecord) had a filename on the commandline so it
=>> > never read from the pipe. Now the data really is going through the
=>> > pipe.
=>> 
=>> 
=>> 
=>> OK, this breaks real bad.  Nothing happens now at all.
=>> 
=>> Output below.
=>> 
=>> Nick
=>> 
=>> ======
=>> 
=>> |-(Data Menu)
=>> |  0) Burn Data
=>> |  1) Copy Data CD (CD to CD)
=>> |  2) Burn Data DVD
=>> |  3) Format CDRW
=>> |  4) Format DVD
=>> |  5) Back
=>> |
=>>         Your Choice? [0-5] |> 1
=>> Warning: creating filesystem that does not conform to ISO-9660.
=>> Setting input-charset to 'ISO-8859-1' from locale.
=>> Cdrecord-ProDVD-ProBD-Clone 2.01.01a38 (i686-pc-linux-gnu) Copyright
=>> (C) 1995-2008 J?rg Schilling TOC Type: 1 = CD-ROM
=>> scsidev: '/dev/cdrom'
=>> devname: '/dev/cdrom'
=>> scsibus: -2 target: -2 lun: -2
=>> Warning: Open by 'devname' is unintentional and not supported.
=>> Linux sg driver version: 3.5.27
=>> Using libscg version 'schily-0.9'.
=>> SCSI buffer size: 64512
=>> atapi: 1
=>> Device type    : Removable CD-ROM
=>> Version        : 0
=>> Response Format: 2
=>> Capabilities   : 
=>> Vendor_info    : 'TSSTcorp'
=>> Identifikation : 'CDDVDW SH-S202J '
=>> Revision       : 'SB00'
=>> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
=>> Current: CD-R
=>> Profile: DVD-R/DL sequential recording 
=>> Profile: DVD-R/DL layer jump recording 
=>> Profile: DVD+R/DL 
=>> Profile: DVD+R 
=>> Profile: DVD+RW 
=>> Profile: DVD-RW sequential recording 
=>> Profile: DVD-RW restricted overwrite 
=>> Profile: DVD-RAM 
=>> Profile: DVD-R sequential recording 
=>> Profile: DVD-ROM 
=>> Profile: CD-RW 
=>> Profile: CD-R (current)
=>> Profile: CD-ROM 
=>> Profile: Removable Disk 
=>> Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
=>> Driver flags   : MMC-3 SWABAUDIO BURNFREE 
=>> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
=>> RAW/R96R Drive buf size : 1962752 = 1916 KB
=>> CD copied!
=>> rm: cannot remove `/home/nick/burn/BashBurn.iso': No such file or
=>> directory
=>
=>Steve, I reverted some of this.  As my svn log says, I rather have a
=>working version...
=>
=>It is working again now.

Nuts. I'll look at it.

-- 
steveo at syslang dot net TMMP1 http://frambors.syslang.net/
Do you have neighbors who are not frambors? Steven W. Orr