Re: [Bashburn-info] CD to CD copy FAILURE

[Nick W. <ni...@li...>]

On Tue, 30 Sep 2008 14:58:04 +0100
Nick Warne <ni...@li...> wrote:

> On Tue, 30 Sep 2008 09:56:36 -0400 (EDT)
> "Steven W. Orr" <st...@sy...> wrote:
> 
> > On Tuesday, Sep 30th 2008 at 09:51 -0000, quoth Nick Warne:
> > 
> > =>
> > =>The error message is such after ripping CD to disc:
> > =>
> > =>...
> > =>...
> > =>Tracks ripped!
> > =>Insert blank CD and then press [ENTER] to go on
> > =>
> > =>cdrecord: No write mode specified.
> > =>cdrecord: Asuming -sao mode.
> > =>cdrecord: If your drive does not accept -sao, try -tao.
> > =>cdrecord: Future versions of cdrecord may have different drive
> > =>dependent defaults. Cdrecord-ProDVD-ProBD-Clone 2.01.01a38
> > =>(i686-pc-linux-gnu) Copyright (C) 1995-2008 J?rg Schilling TOC
> > Type: 1 =>= CD-ROM scsidev: '/dev/cdrom'
> > =>devname: '/dev/cdrom'
> > =>scsibus: -2 target: -2 lun: -2
> > =>Warning: Open by 'devname' is unintentional and not supported.
> > =>Linux sg driver version: 3.5.27
> > =>Using libscg version 'schily-0.9'.
> > =>SCSI buffer size: 64512
> > =>atapi: 1
> > =>Device type    : Removable CD-ROM
> > =>Version        : 0
> > =>Response Format: 2
> > =>Capabilities   : 
> > =>Vendor_info    : 'Optiarc '
> > =>Identifikation : 'DVD RW AD-7200A '
> > =>Revision       : '1.06'
> > =>Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> > =>Current: CD-R
> > =>Profile: DVD+R/DL 
> > =>Profile: DVD+R 
> > =>Profile: DVD+RW 
> > =>Profile: DVD-R/DL layer jump recording 
> > =>Profile: DVD-R/DL sequential recording 
> > =>Profile: DVD-RW sequential recording 
> > =>Profile: DVD-RW restricted overwrite 
> > =>Profile: DVD-RAM 
> > =>Profile: DVD-R sequential recording 
> > =>Profile: DVD-ROM 
> > =>Profile: CD-RW 
> > =>Profile: CD-R (current)
> > =>Profile: CD-ROM (current)
> > =>Profile: Removable Disk 
> > =>Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
> > =>Driver flags   : MMC-3 SWABAUDIO BURNFREE 
> > =>Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
> > =>Drive buf size : 866304 = 846 KB
> > =>FIFO size      : 4194304 = 4096 KB
> > =>cdrecord: No such file or directory. Cannot open
> > =>'burnfree:+driveropts=burnfree'.
> > =>Error occurred! Could not burn the CD
> > =>
> > 
> > Interesting. You need to run this with tracing turned on so we can
> > see what and where
> 
> BUGGER.  It took ages to rip the *.wavs :-D
> 
> I will try again...

A quick grep/find:

burning/burning.sh  line 71

    # HACK to get driveroptions to work. FIXME
    # FIXME: Also, if you modify the variable then it will only work
once. # The second time through, you'll change the value to
    # driveropts=driveropts=$BBOPT_ONE
    BBOPT_ONE=${BBOPT_ONE:+driveropts="$BBOPT_ONE"}


I am still running a copy -> copy so will have the trace soon.

Nick
-- 
Free Software Foundation Associate Member 5508