From: Eric B. <er...@eb...> - 2008-10-15 19:18:36
|
Le Wednesday 15 October 2008 20:55:56 Tomasz Westrych, vous avez écrit : > Hello, > > Thanks for answer, I have managed to set up copy tape to tape and it works. > > I have 2 questions: > > 1. After installing ver 2.5.12 it worked fine but once I have changed some > config in bacula-dir.conf I coudn't start Director error I had was: > 15-Oct 18:41 bacula-dir JobId 0: Fatal error: Could not open Catalog > "MyCatalog", database "bacula". > 15-Oct 18:41 bacula-dir JobId 0: Fatal error: Version error for database > "bacula". Wanted 10, got 11 > 15-Oct 18:41 bacula-dir ERROR TERMINATION > Please correct configuration file: /etc/bacula/bacula-dir.conf > > After this I had to restore my database from backup and then it worked > fine. > > Is there needed to upgrade bacula database after installation? I've > upgraded from 2.4.2 to 2.5.12. I suppose that you have run the upgrade script, and it changes the Catalog version to 11 but the code checks against version 10. I will try to fix this. > 2. I want to run ClientRunAfterJob after copy Job (script that cleans files > from backuped folder) but is seems to omit that, what can be wrong? A copy job doesn't use the client, so using ClientRunAfterJob is maybe not possible. > _____________________ > > My config is: > _____________________ > JobDefs { > Name = "DefaultJob" > Type = Backup > Level = Incremental > Client = serwer_bacula-fd > FileSet = "serwer_baculaFS" > Schedule = "WeeklyCycle" > Messages = Standard > Pool = VTS1ARCH > Priority = 10 > } > > FileSet { > Name = "serwer_baculaFS" > Include { > Options { > signature = MD5 > } > File = /tmp/test1/ > } > } > > Job { > Name = "Serwer_backupu" > JobDefs = "DefaultJob" > Write Bootstrap = "/var/bacula/working/serwer_bacula.bsr" > ClientRunBeforeJob = "/etc/bacula/move_archived_exports" > RunAfterJob = "/etc/bacula/run_kopia_job" > } > > Job { > Name = "Serwer_backupukopia" > Type = Copy > Level = Full > Client = serwer_bacula-fd > FileSet = "Full Set" > Messages = Standard > Pool = VTS1ARCH > Selection Type = SQLQuery > Selection Pattern = "SELECT MAX(JobId) FROM Job WHERE > Name='Serwer_backupu' AND JobStatus ='T';" > ClientRunAfterJob = "/etc/bacula/delete_archived_exports" > <- it's not running > } > > ########################################################################### ># ############################################## > > I'll attach some log, it's a bit long , sorry... > > 16-Oct 00:14 serwer_bacula JobId 18115: Start Backup JobId 18115, > Job=Serwer_backupu.2008-10-16_00.14.03 > 16-Oct 00:14 serwer_bacula JobId 18115: Using Device "Drive-2" > 16-Oct 00:14 serwer_bacula-fd JobId 18115: shell command: run > ClientRunBeforeJob "/etc/bacula/move_archived_exports" > 16-Oct 00:14 serwer_bacula-sd JobId 18115: 3307 Issuing autochanger "unload > slot 4012, drive 0" command. > 16-Oct 00:14 serwer_bacula-sd JobId 18115: 3304 Issuing autochanger "load > slot 4013, drive 0" command. > 16-Oct 00:14 serwer_bacula-sd JobId 18115: 3305 Autochanger "load slot > 4013, drive 0", status is OK. > 16-Oct 00:14 serwer_bacula-sd JobId 18115: Wrote label to prelabeled Volume > "Y04013" on device "Drive-2" (/dev/tape2) > 16-Oct 00:14 serwer_bacula JobId 18115: Max Volume jobs exceeded. Marking > Volume "Y04013" as Used. > 16-Oct 00:14 serwer_bacula-sd JobId 18115: Job write elapsed time = > 00:00:01, Transfer rate = 11.01 M bytes/second > 16-Oct 00:14 serwer_bacula JobId 18115: Bacula serwer_bacula 2.5.12 > (07Oct08): 16-Oct-2008 00:14:36 > Build OS: s390x-ibm-linux-gnu suse 10 > JobId: 18115 > Job: Serwer_backupu.2008-10-16_00.14.03 > Backup Level: Incremental, since=2008-10-16 00:07:48 > Client: "serwer_bacula-fd" 2.5.12 (07Oct08) > s390x-ibm-linux-gnu,suse,10 > FileSet: "serwer_baculaFS" 2008-10-15 19:11:02 > Pool: "VTS1ARCH" (From Job resource) > Catalog: "MyCatalog" (From Client resource) > Storage: "VTS-Robot" (From Pool resource) > Scheduled time: 16-Oct-2008 00:14:04 > Start time: 16-Oct-2008 00:14:08 > End time: 16-Oct-2008 00:14:36 > Elapsed time: 28 secs > Priority: 10 > FD Files Written: 2 > SD Files Written: 2 > FD Bytes Written: 11,013,921 (11.01 MB) > SD Bytes Written: 11,014,095 (11.01 MB) > Rate: 393.4 KB/s > Software Compression: None > VSS: no > Encryption: no > Accurate: no > Volume name(s): Y04013 > Volume Session Id: 1 > Volume Session Time: 1224108791 > Last Volume Bytes: 11,096,064 (11.09 MB) > Non-fatal FD errors: 0 > SD Errors: 0 > FD termination status: OK > SD termination status: OK > Termination: Backup OK > > 16-Oct 00:14 serwer_bacula JobId 18115: Begin pruning Jobs. > 16-Oct 00:14 serwer_bacula JobId 18115: No Jobs found to prune. > 16-Oct 00:14 serwer_bacula JobId 18115: Begin pruning Files. > 16-Oct 00:14 serwer_bacula JobId 18115: No Files found to prune. > 16-Oct 00:14 serwer_bacula JobId 18115: End auto prune. > > 16-Oct 00:14 serwer_bacula JobId 18115: shell command: run AfterJob > "/etc/bacula/run_kopia_job" > 16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: Connecting to Director > 126.177.54.98:9101 > 16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: 1000 OK: serwer_bacula > Version: 2.5.12 (07 October 2008) > 16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: Enter a period to cancel > a command. > 16-Oct 00:14 serwer_bacula JobId 18115: AfterJob: @output > /etc/bacula/bacula.out > 16-Oct 00:14 serwer_bacula JobId 18116: The following 1 JobId was chosen to > be copied: 18115 > 16-Oct 00:14 serwer_bacula JobId 18116: Copying using JobId=18115 > Job=Serwer_backupu.2008-10-16_00.14.03 > 16-Oct 00:14 serwer_bacula JobId 18116: Bootstrap records written to > /var/bacula/working/serwer_bacula.restore.1.bsr > 16-Oct 00:14 serwer_bacula JobId 18116: Start Copying JobId 18116, > Job=Serwer_backupukopia.2008-10-16_00.14.05 > 16-Oct 00:14 serwer_bacula JobId 18116: Using Device "Drive-4" > 16-Oct 00:14 serwer_bacula-sd JobId 18116: Ready to read from volume > "Y04013" on device "Drive-2" (/dev/tape2). > 16-Oct 00:14 serwer_bacula-sd JobId 18116: 3307 Issuing autochanger "unload > slot 4007, drive 0" command. > 16-Oct 00:14 serwer_bacula-sd JobId 18116: 3304 Issuing autochanger "load > slot 4008, drive 0" command. > 16-Oct 00:21 serwer_bacula-sd JobId 18116: 3305 Autochanger "load slot > 4008, drive 0", status is OK. > 16-Oct 00:22 serwer_bacula-sd JobId 18116: Wrote label to prelabeled Volume > "Y54008" on device "Drive-4" (/dev/tape4) > 16-Oct 00:22 serwer_bacula JobId 18116: Max Volume jobs exceeded. Marking > Volume "Y54008" as Used. > 16-Oct 00:22 serwer_bacula-sd JobId 18116: Forward spacing Volume "Y04013" > to file:block 1:1. > 16-Oct 00:22 serwer_bacula-sd JobId 18116: End of file 2 on device > "Drive-2" (/dev/tape2), Volume "Y04013" > 16-Oct 00:22 serwer_bacula-sd JobId 18116: End of file 3 on device > "Drive-2" (/dev/tape2), Volume "Y04013" > 16-Oct 00:22 serwer_bacula-sd JobId 18116: End of Volume at file 3 on > device "Drive-2" (/dev/tape2), Volume "Y04013" > 16-Oct 00:22 serwer_bacula-sd JobId 18116: End of all volumes. > 16-Oct 00:22 serwer_bacula JobId 18116: Bacula serwer_bacula 2.5.12 > (07Oct08): 16-Oct-2008 00:22:02 > Build OS: s390x-ibm-linux-gnu suse 10 > Prev Backup JobId: 18115 > New Backup JobId: 18117 > Current JobId: 18116 > Current Job: Serwer_backupukopia.2008-10-16_00.14.05 > Backup Level: Full > Client: serwer_bacula-fd > FileSet: "Full Set" 2007-10-20 23:05:00 > Read Pool: "VTS1ARCH" (From Job resource) > Read Storage: "VTS-Robot" (From Pool resource) > Write Pool: "VTS2ARCH" (From Job Pool's NextPool resource) > Write Storage: "VTS-Robot2" (From Storage from Pool's NextPool > resource) > Catalog: "MyCatalog" (From Client resource) > Start time: 16-Oct-2008 00:14:38 > End time: 16-Oct-2008 00:22:02 > Elapsed time: 7 mins 24 secs > Priority: 10 > SD Files Written: 2 > SD Bytes Written: 11,014,095 (11.01 MB) > Rate: 24.8 KB/s > Volume name(s): Y54008 > Volume Session Id: 2 > Volume Session Time: 1224108791 > Last Volume Bytes: 11,096,064 (11.09 MB) > SD Errors: 0 > SD termination status: OK > Termination: Copying OK > > 16-Oct 00:22 serwer_bacula JobId 18116: Begin pruning Jobs. > 16-Oct 00:22 serwer_bacula JobId 18116: No Jobs found to prune. > 16-Oct 00:22 serwer_bacula JobId 18116: Begin pruning Files. > 16-Oct 00:22 serwer_bacula JobId 18116: No Files found to prune. > 16-Oct 00:22 serwer_bacula JobId 18116: End auto prune. > > > Best regards, > > Tomasz > > -----Wiadomość oryginalna----- > Od: Kern Sibbald [mailto:ke...@si...] > Wysłano: 8 października 2008 15:32 > Do: bac...@li... > DW: to...@po... > Temat: Re: [Bacula-devel] Bacula copy pools , volumes option > > On Wednesday 08 October 2008 09:01:41 to...@po... wrote: > > Hello, > > > > I'd like to ask if it is planed to implement copy pools , volumes in > > new version of bacula. It would be great functionality. I would be > > able to make copies of backed-up data from tape to tape into few pools > > without running the same job with different pool setting. > > > > I'm very interested in testing this solution if there is any beta > > version we can test. > > Yes, this functionality exists in the current development version of > Bacula. > > If you want to know about the new features, please see: > > http://www.bacula.org/manuals/en/concepts/concepts/New_Features.html > > Best regards, > > Kern > > > Best regards, > > > > Tomasz > > |